STM32G491VET6 - 170MHz Cortex-M4F MCU | STMicroelectronics
MPN: STM32G491VET6 ✓ چالاکSTM32G491VET6 گشتی
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The STM32G4 family combines general-purpose embedded control with enhanced analog conversion and timing resources. This hierarchy places the STM32G491VET6 within the STM32G4 family, Cortex-M4F embedded controllers, 32-bit RISC processors, and the broader category of semiconductor microcontrollers used for industrial, automation, sensing, and connected equipment.
The STM32G491VET6 combines a maximum operating frequency of 170 MHz with 512 KB of Flash and the Arm Cortex-M4F instruction set. The FPU-equipped Cortex-M4F core supports efficient floating-point calculations for control loops, signal processing, and data conversion. Its 100-LQFP package provides a high pin count for external connectivity while retaining a conventional leaded format that can be assembled with standard surface-mount production equipment.
STMicroelectronics identifies the STM32G491xC/xE devices as members of the STM32G4 series built around the high-performance Arm Cortex-M4 32-bit RISC core. The combination of processing performance, integrated Flash, and a large package makes the device appropriate for designs requiring substantial control logic and multiple external interfaces rather than ultra-minimized endpoint nodes.
Typical uses include industrial motor-control systems, factory automation equipment, metering instruments, IoT gateways, embedded control boards, and low-power connected products. The Cortex-M4F processing capability is useful for real-time control, while the large 100-pin package provides access to a broad collection of GPIO and peripheral functions required by complex embedded systems.
Design work should begin with the STM32G491VE product page and the manufacturer's complete device documentation. Confirm the exact peripheral assignments, electrical limits, clock configuration, pin multiplexing, and exposed-package details for the PCB design. Because the 14 x 14 mm LQFP body has closely spaced leads, PCB solder mask, paste volume, and reflow-profile control are important production considerations.
This product page combines the exact STM32G491VET6 identity, package, processor, frequency, and Flash details with engineering-oriented selection guidance, application analysis, and a documented drop-in alternative review. It also distinguishes verified device attributes from parameters that require confirmation from the manufacturer's full technical documentation.
جێگرەوەکانی جێگۆڕکێ بۆ STM32G491VET6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32G491VET6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type, Flash Memory, ADC Resolution, Core.
STM32G491VEH6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32G491VET6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Manufacturer | STMicroelectronics |
| Product Type | 32-bit embedded microcontroller |
| Product Series | STM32G4 |
| Processor Core | Arm Cortex-M4F |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 170 MHz |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 bits |
| پاکێج | 100-pin LQFP |
| Package Dimensions | 14 x 14 mm |
| جۆری دامەزراندن | Surface mount |
ڕێنمایی ڕێکخستنی پینی STM32G491VET6 14 x 14 mm
ڕێکخستنی پین بۆ STM32G491VET6 (پاکێجی 14 x 14 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32G491VET6.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
STM32G491VET6 گونجاوە بۆ 6 بەکارھێنانs: Industrial Motor Control, Factory Automation Control, Smart Metering, Industrial IoT Gateway, Embedded Measurement and Control, Connected Sensor Hub.
Industrial Motor Control
The STM32G491VET6 fits industrial motor-control platforms that combine real-time computation with numerous external control connections. Its Arm Cortex-M4F core operates up to 170 MHz, and the 512 KB Flash provides substantial room for motion algorithms, state handling, and communication services. The 100-pin LQFP package offers 100 physical positions for control inputs, encoder signals, communications, and actuator outputs. Before finalizing a motor-drive board, verify timer channels, encoder support, ADC characteristics, PWM outputs, and protection functions against the manufacturer documentation.
پێشنیارکراو
Factory Automation Control
The STM32G491VET6 is suitable for factory automation controllers that coordinate sensors, actuators, operator interfaces, and industrial communications on one board. A 170 MHz Cortex-M4F processor provides responsive deterministic control, while 512 KB of Flash supports application logic and firmware layers. Its 100-pin LQFP format provides more connection options than small-outline microcontrollers and supports a conventional manufacturing process. Confirm the required CAN, UART, SPI, I2C, timer, and GPIO assignments in the pin table before schematic capture.
پێشنیارکراو
Smart Metering
The STM32G491VET6 can support metering equipment that measures analog inputs, applies calibration, records events, and communicates results. The Cortex-M4F core performs floating-point processing efficiently at up to 170 MHz, while 512 KB of Flash accommodates measurement algorithms and communications firmware. Its 100-pin package creates room for sensor inputs, displays, communication interfaces, and external references. Validate ADC accuracy, reference requirements, timer channels, communication timing, and low-power behavior against the final metering architecture.
پێشنیارکراو
Industrial IoT Gateway
The STM32G491VET6 suits an industrial IoT gateway that must aggregate local sensor data, run protocol processing, and manage multiple external interfaces. Its 170 MHz Cortex-M4F core offers ample headroom for networking and control tasks, and 512 KB of Flash supports a meaningful embedded application. The 100-pin LQFP package provides flexibility for Ethernet or serial interfaces, status indicators, and secure storage. Select the radio, transceiver, and security components separately, then confirm clocking and peripheral sharing in the complete design.
پێشنیارکراو
Embedded Measurement and Control
The STM32G491VET6 fits embedded measurement-and-control products requiring real-time sampling, digital filtering, and coordinated outputs. Its Arm Cortex-M4F core supports efficient floating-point computation at up to 170 MHz, while 512 KB of Flash holds control code, configuration tables, and communication services. The 100-pin LQFP package provides access to a broad mix of GPIO and peripheral assignments for analog front ends and digital interfaces. Confirm ADC performance, trigger sources, timer resolution, and synchronization features before using it as the system timing hub.
پێشنیارکراو
Connected Sensor Hub
The STM32G491VET6 is appropriate for a connected sensor hub that combines local sensing, signal conditioning, data processing, and network communication. The 170 MHz Cortex-M4F processor can handle protocol framing and control tasks, while the 512 KB Flash configuration provides room for application and update logic. Its 100-pin package supports multiple sensors, status feedback, and communication interfaces without relying on a very small package. Review the device's low-power modes and wake-up sources, and ensure the external radio and sensor supplies meet the system noise requirements.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ STM32G491VET6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | STM32G491VEH6 |
|---|---|---|
| Manufacturer | STMicroelectronics | STMicroelectronics |
| Product Series | STM32G4 | STM32G4 |
| Processor Core | Arm Cortex-M4F | Arm Cortex-M4F |
| Maximum CPU Frequency | 170 MHz | 170 MHz |
| Flash Memory | 512 KB | 512 KB |
| Flash Organization | 512K x 8 bits | 512K x 8 bits |
| Package | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) - same |
| Architecture | 32-bit RISC | 32-bit RISC |
| Temperature Grade | Standard grade | Extended industrial grade |
جیاکەرەوە سەرەکییەکان
- Direct family-compatible temperature-grade alternative (بەراورد بەSTM32G491VEH6)
- High-performance Cortex-M4F processing (بەراورد بەSTM32F411VET6)
- Substantial embedded program storage (بەراورد بەSTM32F103VET6TR)
تێبینییەکانی دیزاین
Use the 14 x 14 mm 100-pin LQFP land pattern and pin-1 orientation defined by the STM32G491VE package drawing. Keep high-speed communication and clock traces short, place decoupling capacitors near their associated supply pins, and provide a low-impedance ground plane beneath the device. Confirm exposed-pad and thermal-via requirements from the manufacturer drawing before releasing the PCB artwork.
Decouple each required supply rail locally and check the device's exact operating-voltage limits in the manufacturer documentation. Validate startup sequencing, regulator tolerance, transient response, and load-current margins for the complete board. The 170 MHz operating point does not determine the supply requirement by itself; clock-tree settings, peripherals, and environmental conditions must also be included in the power-budget calculation.
At 170 MHz, the actual switching loss depends on the clock configuration, enabled peripherals, supply voltage, and ambient temperature rather than frequency alone. Route exposed heat-generating paths to adequate copper area, use thermal vias where the package design permits, and verify junction-temperature limits in the final enclosure. Use manufacturer power-dissipation guidance for the final operating mode rather than applying a generic estimate.
Do not assume that every 100-pin STM32 part is software- or pin-compatible. The STM32G491VET6 requires correct peripheral enablement, pin multiplexing, clock configuration, and startup code for the STM32G4 family. Review the device pin table and reference manual before assigning pins, and validate any proposed replacement for differences in analog performance, timers, connectivity, and low-power behavior.
زانیاری پابەندبوون
Compliance declarations require confirmation from the STM32G491VE manufacturer product documentation and the exact STM32G491VET6 material declaration.