STM32L071RBT6 - 32MHz Cortex-M0+ 128KB MCU | STMicroelectronics
MPN: STM32L071RBT6 ✓ چالاکSTM32L071RBT6 گشتی
An ultra-low-power microcontroller is a semiconductor designed to complete control, sensing, and communication tasks while minimizing energy consumption. The STM32L0 access-line family combines an Arm Cortex-M0+ RISC core with embedded Flash, SRAM, and low-power peripherals in a single device. This places it within the hierarchy of microcontroller, embedded processor, RISC processor, and power-efficient semiconductor devices.
The STM32L071RBT6's headline characteristics include a 32-bit Arm Cortex-M0+ core, a maximum stated operating frequency of 32 MHz, and 128 KB of Flash organized as 128K x 8 bits. Its 64-lead LQFP package provides a familiar leaded footprint for manufacturing, inspection, and manual or automated assembly. The device also provides 20 KB of SRAM according to the STM32L071RB family datasheet listing.
The Cortex-M0+ architecture provides a simple instruction set and efficient real-time execution suitable for embedded control workloads. Because the STM32L071 series is positioned as an access-line, ultra-low-power MCU, it is appropriate for designs where low energy use, compactness, and a broad embedded feature set matter more than high-end graphics, large memory configurations, or high-pin-count connectivity.
Typical uses include low-power sensor nodes, battery-operated monitoring equipment, compact industrial controllers, building and access peripherals, and connected products that periodically wake to perform a measurement or communicate information. The 128 KB Flash capacity gives embedded developers room for application code, drivers, protocol stacks, and configuration data within a single-package solution.
PCB design should preserve access to all 64 package leads and follow the manufacturer pin-definition and layout guidance exactly. Power decoupling, clock stability, reset configuration, and programming access are especially important in compact industrial products. Firmware qualification should also include tests across the intended voltage and temperature limits because low-power behavior and peripheral timing must be verified in the finished system.
This product page combines the manufacturer family information, package and memory details, sourcing guidance, drop-in candidates, and application-oriented engineering notes. It helps designers evaluate the STM32L071RBT6 not only as a 32 MHz Cortex-M0+ MCU, but also as a practical 128 KB Flash, 64-LQFP platform for compact, energy-conscious embedded products.
جێگرەوەکانی جێگۆڕکێ بۆ STM32L071RBT6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32L071RBT6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, RoHS Status, ADC, Communication Interfaces, Comparators.
STM32L071RBT7TR
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32L031RBT6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32L051RBT6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32L071RBT6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M0+ |
| Instruction Set Architecture | 32-bit Arm RISC |
| Maximum CPU Frequency | 32 MHz |
| Embedded Flash Memory | 128 KB (128K x 8 bits) |
| Static RAM | 20 KB |
| Series | STM32L0 access line |
| پاکێج | 64-LQFP (10 x 10 mm) |
| Number of Leads | 64 leads |
| جۆری دامەزراندن | Surface mount |
| Core Architecture | Arm Cortex-M0+ RISC |
| Product Family | STM32L071RB |
| دۆخی RoHS | Compliant |
| REACH Status | unknown |
| Moisture Sensitivity Level | MSL 3 |
ڕێنمایی ڕێکخستنی پینی STM32L071RBT6 64-lqfp (10 x 10 mm)
ڕێکخستنی پین بۆ STM32L071RBT6 (پاکێجی 64-lqfp (10 x 10 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32L071RBT6.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
STM32L071RBT6 گونجاوە بۆ 6 بەکارھێنانs: Battery-Powered Sensor Nodes, Industrial Monitoring Equipment, Smart Home and Building Peripherals, Connected IoT Products, Compact Control and Actuator Interfaces, Wearable and Portable Accessories.
Battery-Powered Sensor Nodes
The STM32L071RBT6 fits compact battery-powered sensor nodes that periodically acquire measurements, process them locally, and communicate results. Its 32 MHz Arm Cortex-M0+ core provides responsive control for sensor housekeeping, while 128 KB of Flash can hold drivers, sampling logic, and protocol code without requiring an external memory device. The 20 KB of SRAM supports local buffering and application state. Its 64-LQFP 10 x 10 mm package also permits a compact board, although final battery performance depends on the selected sleep mode, sensor duty cycle, radio activity, and the operating conditions used in system testing.
پێشنیارکراو
Industrial Monitoring Equipment
The STM32L071RBT6 is suitable for industrial monitoring equipment that combines local sensing, control logic, status indication, and communication in one embedded platform. A 32 MHz Cortex-M0+ core can execute acquisition routines, filtering, thresholds, and protocol handling while the 128 KB Flash provides room for a substantial application. The 64-LQFP package exposes more leads than a small-lead-count package, supporting a wider selection of interfaces on a PCB that must remain inspectable and manufacturable. Production designs should verify operating-temperature limits, supply-voltage behavior, and peripheral availability for the selected STM32L071RB suffix.
پێشنیارکراو
Smart Home and Building Peripherals
The STM32L071RBT6 can serve as the controller in a smart-home or building peripheral such as a sensor node, room controller, access device, or connected actuator interface. Its 128 KB Flash and 20 KB SRAM allow local logic, configuration handling, and communication state to coexist in one microcontroller. The 32 MHz Cortex-M0+ core supports responsive event handling without requiring a higher-power application processor. In this environment, low-power behavior, watchdog operation, firmware update strategy, and interface compatibility are as important as raw processing speed, so the complete firmware should be tested across sleep, restart, and peripheral fault conditions.
پێشنیارکراو
Connected IoT Products
The STM32L071RBT6 is appropriate for compact connected products that need a low-power MCU to manage sensors, local logic, and a communications interface. The 128 KB Flash capacity supports boot code, application firmware, protocol handlers, and configuration data, while 20 KB of SRAM can maintain working buffers and state. Its Arm Cortex-M0+ architecture simplifies firmware deployment compared with more complex processor platforms. A practical IoT design should budget radio and sensor duty cycles alongside MCU execution, and it should confirm that the selected package exposes every required communication and debug signal on the 64-LQFP footprint.
پێشنیارکراو
Compact Control and Actuator Interfaces
The STM32L071RBT6 can act as the local controller for compact actuator, keypad, display, and relay-interface modules. Its 32-bit Cortex-M0+ core handles state-machine logic, input debouncing, output updates, and communication tasks, while the 128 KB Flash and 20 KB SRAM provide sufficient resources for embedded control firmware. The 64-LQFP package offers a practical pin count for several external peripherals while remaining compact and broadly manufacturable. Designers should use the pin-definition table to assign alternate functions, provide proper decoupling, and include protection appropriate to the loads driven by the finished interface.
پێشنیارکراو
Wearable and Portable Accessories
The STM32L071RBT6 is suitable for portable accessories where space and energy efficiency require a focused embedded controller rather than a high-power processor. The 32 MHz Cortex-M0+ core can respond to user input, process sensor data, and manage a low-rate communications link. Its 128 KB Flash supports compact application logic and update-capable firmware, while the 64-LQFP package remains small enough for many wearable-adjacent products. Enclosure constraints may make a smaller package desirable in very compact products, so engineers should compare the board-area requirement against the need for 64 accessible leads before committing the footprint.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ STM32L071RBT6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | STM32L071RBT7TR | STM32L031RBT6 | STM32L051RBT6 |
|---|---|---|---|---|
| Package | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Embedded Flash Memory | 128 KB | 128 KB | 32 KB | 32 KB |
| Product Series | STM32L0 access line | STM32L0 access line | STM32L0 access line | STM32L0 access line |
| Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount |
جیاکەرەوە سەرەکییەکان
- Higher embedded Flash capacity within the same STM32L0 64-LQFP footprint (بەراورد بەSTM32L031RBT6)
- More firmware space without changing to a different processor architecture (بەراورد بەSTM32L051RBT6)
- Closest orderable-family alternative with identical core, memory class, and package (بەراورد بەSTM32L071RBT7TR)
تێبینییەکانی دیزاین
Assign all 64 LQFP nets from the STM32L071RB manufacturer pin-definition table, including alternate-function mappings, power pins, ground pins, reset, clock, and programming signals. Keep the footprint, pad geometry, and solder-mask design tied to the official package drawing. Because different STM32L071 orderable suffixes can have suffix-specific constraints, do not approve a PCB solely from the base family name; verify the exact fitted MPN and its production requirements.
Plan input and output decoupling at the device pins using the capacitor values and placement rules in the manufacturer hardware guidance. Keep high-current return paths compact and provide a clean ground reference for clock and sensitive signal routing. Validate brownout behavior, startup sequencing, and the relationship between supply voltage and maximum clock frequency across the complete product power range; the 32 MHz operating point must remain valid for every supported supply condition.
Do not treat an LQFP footprint match as proof that every STM32L0 device is functionally interchangeable. The STM32L031RBT6 and STM32L051RBT6 candidates have less Flash than the STM32L071RBT6, and the T7TR ordering suffix introduces its own device-specific conditions. Check memory requirements, peripheral availability, pin assignments, interrupt vectors, bootloader behavior, and temperature limits before substituting any candidate. Run the complete firmware and boundary-condition tests on the final PCB.
Place decoupling capacitors adjacent to the corresponding supply pins and route clock and debug signals away from high-current switching nodes. The 64-LQFP footprint provides generous routing access but can create long connections between opposing sides of the device; use the shortest practical paths for sensitive signals and establish a predictable ground arrangement. Apply the manufacturer's pin and layout guidance during schematic and PCB review to avoid later footprint or fanout changes.
زانیاری پابەندبوون
The PartGenie component record identifies the STM32L071RBT6 as RoHS compliant and MSL 3. No definitive REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was found for the exact orderable MPN.