STMicroelectronics

STM32L072RZT6 - 32MHz Cortex-M0+ 192KB Flash MCU | STMicroelectronics

MPN: STM32L072RZT6 ✓ چالاک
64-LQFP (10 x 10 mm) Package 32 MHz Speed 192 KB Memory
MOQ: 1 |

STM32L072RZT6 گشتی

The STMicroelectronics STM32L072RZT6 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller with a 32 MHz maximum CPU frequency, 192 KB of Flash memory, and a 64-LQFP 10 x 10 mm package. It belongs to the STM32L0 low-power microcontroller family and is designed for embedded designs requiring low energy consumption, USB connectivity, and a compact surface-mount footprint.

An ultra-low-power microcontroller is a semiconductor device intended for battery-operated or energy-constrained embedded products. The STM32L0 family combines a low-power Arm Cortex-M0+ processor core with embedded Flash, SRAM, peripheral interfaces, and low-power operating modes. This places the MCU within the hierarchy of microcontroller, embedded processor, semiconductor, and system-on-chip design categories.

Key device attributes include a 32 MHz Arm Cortex-M0+ core, 192 KB Flash, USB 2.0 crystal-less connectivity support, and a 64-LQFP package. The 192 KB Flash provides embedded firmware storage, while the USB capability supports connected peripheral, data-logging, and configuration applications. The LQFP package offers 64 accessible leads and is suitable for surface-mount PCB assembly.

The STM32L072RZT6 is positioned for designs where low-power operation and USB connectivity are more important than high analog integration or high-speed digital processing. Its Arm Cortex-M0+ architecture is suitable for firmware execution, peripheral control, communications, and basic signal handling. Exact RAM size, supply-voltage limits, GPIO configuration, and peripheral current consumption require confirmation in the manufacturer datasheet before final schematic design.

Typical applications include USB-connected sensors, compact data loggers, industrial control modules, battery-powered instruments, and wearable or portable measurement devices. In these systems, the MCU can manage low-power acquisition, device configuration, and USB data transfer while reducing the overall system power budget.

PCB planning should reserve the 64-LQFP footprint, connect the required power and ground pins according to the manufacturer reference schematic, and route USB data lines as a controlled-impedance differential pair. Confirm the exact pin assignments, decoupling requirements, BOOT configuration, clock options, and exposed programming or debug connections in the manufacturer pinout and application documentation.

This page combines the manufacturer product identity, package and memory details, search-specific sourcing questions, and practical replacement considerations for engineers evaluating the STM32L072RZT6. Because a true cross-manufacturer pin-to-pin replacement is uncommon in this device class, alternative listings should be screened carefully for package, memory, USB, peripheral, firmware, and lifecycle compatibility before schematic approval.

جێگرەوەکانی جێگۆڕکێ بۆ STM32L072RZT6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32L072RZT6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Flash Memory, Core, ADC, Flash Organization.

STMicroelectronics
Package: LQFP-64
Flash Memory: 128 KB
Core: ARM Cortex-M0+
بەراوردکردن لەگەڵ STM32L072RZT6 →
STMicroelectronics
Package: 64-UFBGA (5x5 mm)
Core: ARM Cortex-M0+ (32-bit)
ADC: 12-bit, up to 16 channels
بەراوردکردن لەگەڵ STM32L072RZT6 →
STMicroelectronics
Package: LQFP-64 (10x10 mm)
Core: ARM Cortex-M0+
ADC: 1x 12-bit, 16 channels, with hardware oversampling
بەراوردکردن لەگەڵ STM32L072RZT6 →
STMicroelectronics
Package: 64-LQFP (10 mm x 10 mm)
Flash Organization: 192K x 8 bits
بەراوردکردن لەگەڵ STM32L072RZT6 →

هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.

داوای جێگرەوەکان بکە

STM32L072RZT6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type Ultra-low-power 32-bit microcontroller
Manufacturer STMicroelectronics
Series STM32L0
Processor Core Arm Cortex-M0+
CPU Frequency 32 MHz
Architecture 32-bit
Flash Memory 192 KB
Flash Organization 192K x 8
USB Version USB 2.0
USB Clocking Crystal-less
پاکێج 64-LQFP (10 x 10 mm)
جۆری دامەزراندن Surface Mount
ژمارەی پین 64 pins
دۆخی چرخەی ژیان Active

ڕێنمایی ڕێکخستنی پینی STM32L072RZT6 64-lqfp (10 x 10 mm)

ڕێکخستنی پین بۆ STM32L072RZT6 (پاکێجی 64-lqfp (10 x 10 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 64-lqfp (10 x 10 mm) بۆ STM32L072RZT6

هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32L072RZT6.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

STM32L072RZT6 گونجاوە بۆ 6 بەکارھێنانs: USB-Connected Sensor Module, Battery-Powered Data Logger, Industrial Control Module, Portable Measurement Instrument, USB-to-Configuration Adapter, Low-Power Wearable Controller.

🧩

USB-Connected Sensor Module

The STM32L072RZT6 fits a USB-connected sensor module because it combines an Arm Cortex-M0+ core running up to 32 MHz with 192 KB of Flash and USB 2.0 crystal-less connectivity. The MCU can acquire sensor data, apply local filtering or calibration, and expose configuration and logged measurements through USB. Its 64-LQFP 10 x 10 mm package also leaves substantial board area around the device for connectors, protection, and precision support components.

⚡

Battery-Powered Data Logger

The STM32L072RZT6 is appropriate for a compact, battery-powered data logger when low-power behavior is a primary requirement. Its 192 KB Flash provides substantial embedded firmware and local logging capacity, while the 32 MHz Cortex-M0+ core can supervise sensors, timestamps events, and manage a USB connection for configuration or data transfer. A final power assessment should compare the MCU's sleep and active currents with the logger's sensor and interface duty cycle.

🏭

Industrial Control Module

The STM32L072RZT6 can serve as the control processor in an industrial module that requires deterministic embedded control and a compact surface-mount footprint. At up to 32 MHz, the Cortex-M0+ core can coordinate digital inputs, outputs, communications, and local supervision. Its 192 KB Flash supports a structured firmware image, while the 64-LQFP package provides a manageable assembly footprint for automated production equipment.

📱

Portable Measurement Instrument

The STM32L072RZT6 supports portable measurement instruments that combine local control with USB connectivity. The MCU can manage a sensor front end, apply calibration, format results, and update a host computer over USB. Its 32 MHz processing rate is suitable for many control, monitoring, and communication tasks, and the 192 KB Flash allows embedded firmware and lookup data without demanding a larger memory footprint.

🔧

USB-to-Configuration Adapter

The STM32L072RZT6 is well matched to a USB-to-configuration adapter where the device needs to receive setup commands and expose status without a separate display or high-power processor. USB 2.0 crystal-less operation can simplify clock strategy, while the Cortex-M0+ core performs protocol handling, configuration validation, nonvolatile parameter storage, and fault reporting. Firmware should include USB suspend handling and recovery from bus faults or cable removal.

📱

Low-Power Wearable Controller

The STM32L072RZT6 can act as a low-power controller in a wearable or other portable product when its STM32L0 low-power positioning matches the required sleep budget. The MCU handles button input, sensor management, local state, and occasional USB communication, while 192 KB Flash accommodates application firmware. Wearable designs should confirm sleep current, wake sources, analog behavior, and available board area during qualification.

What is the STM32L072RZT6?
The STM32L072RZT6 is an ultra-low-power, 32-bit STMicroelectronics microcontroller built around an Arm Cortex-M0+ core. According to the STM32L072RZ manufacturer product page and product listing, it operates up to 32 MHz, provides 192 KB of Flash organized as 192K x 8, supports USB 2.0 crystal-less connectivity, and is packaged in a 64-LQFP 10 x 10 mm surface-mount package.
What are the key specifications of STM32L072RZT6 that engineers should know?
The STM32L072RZT6 combines an Arm Cortex-M0+ processor, 32 MHz maximum CPU frequency, 192 KB Flash, USB 2.0 crystal-less support, and a 64-LQFP 10 x 10 mm package. The manufacturer identifies it as part of the ultra-low-power STM32L0 family. The exact RAM capacity, voltage range, GPIO count, and electrical limits should be taken from the manufacturer datasheet before power, memory, and board-layout decisions are finalized.
Where can I download the STM32L072RZT6 datasheet PDF?
The STM32L072RZT6 technical documentation begins with the official STMicroelectronics STM32L072RZ product page. Open the product page and select its datasheet or technical-document resources. The page identifies the device as an ultra-low-power STM32L0 microcontroller with USB 2.0 crystal-less connectivity. Use the manufacturer document as the controlling source for pin assignments, timing, electrical characteristics, and package drawings.
Where can I find the STM32L072RZT6 pinout?
The STM32L072RZT6 pinout is available from the official STM32L072RZ product documentation and its manufacturer datasheet. The device uses a 64-LQFP package, so the package drawing must show all 64 numbered leads and the pin-1 orientation. Assign power, ground, reset, boot, clock, programming, USB, and GPIO functions from the pin-description table rather than inferring connections from another STM32L0 model.
How much RAM does the STM32L072RZT6 have?
The verified STM32L072RZT6 product information confirms 192 KB of Flash but does not state the SRAM capacity. Confirm the RAM size in the STM32L072RZ manufacturer datasheet before sizing DMA buffers, sampled-data storage, or display and communication buffers. The L072 family includes different memory configurations, so the ordering code and device datasheet should be checked rather than assuming the SRAM capacity from a related variant.
What supply voltage does the STM32L072RZT6 require?
The exact STM32L072RZT6 operating-voltage range is not stated in the verified product listings and must be confirmed in the manufacturer datasheet. Before circuit design, check the voltage limits for the MCU core, I/O structures, analog peripherals, USB PHY, and external flash-memory operation. Ensure that every connected module shares a compatible logic level and that the regulator has adequate transient and decoupling performance.
Can the STM32L072RZT6 be used for USB-connected sensor designs?
Yes, the STM32L072RZT6 is suitable for USB-connected sensor designs because it supports USB 2.0 crystal-less connectivity. A typical architecture uses the MCU to acquire sensor data, perform local control, and expose configuration or logged data over USB. Verify the exact USB pin assignment, transceiver requirements, power states, and firmware support in the manufacturer documentation before finalizing the board.
STM32L072RZT6 vs STM32L073RZT6 - which is better?
The STM32L073RZT6 is the closer same-package comparison candidate identified for this device, but the verified data does not establish that it is a pin-to-pin drop-in replacement. The STM32L072RZT6 is confirmed as a 32 MHz Arm Cortex-M0+ device with 192 KB Flash in 64-LQFP. Compare the STM32L073RZT6 memory map, peripherals, USB behavior, clock tree, package drawing, and firmware support before using it as a substitution.
What is the best drop-in replacement for STM32L072RZT6?
No independently verified cross-manufacturer drop-in replacement for the STM32L072RZT6 is established by the available cross-reference results. The product is a 64-LQFP STM32L0 device with 192 KB Flash, USB 2.0 crystal-less support, and an Arm Cortex-M0+ core, so merely matching the package is insufficient for a safe substitution. Treat any candidate as a redesign until its pinout, electrical limits, memory organization, peripheral mapping, and firmware behavior are compared directly.
Can STM32L073RZT6 replace STM32L072RZT6?
The STM32L073RZT6 should not be treated as an automatic drop-in replacement without validation. It is associated with the STM32L0 family and a 64-lead quad-flat package, which makes it a relevant candidate for evaluation, but the verified material does not confirm identical pin functions or electrical behavior. Check all 64 pins, memory capacities, USB requirements, peripherals, clock settings, and software drivers before approving a substitution.
What can replace the STM32L072RZT6?
The safest replacement is another STMicroelectronics STM32L072-family ordering code with the same 64-LQFP footprint and an exact pin-for-pin match, after which firmware and supply requirements are reviewed. No cross-brand part in the verified cross-reference results is confirmed as electrically and software compatible. For production sourcing, request the current device status and qualify any proposed alternate through schematic review, firmware testing, and lifecycle review.
When should I choose the STM32L072RZT6 over another low-power MCU?
Choose the STM32L072RZT6 when a design specifically benefits from the STM32L0 combination of an Arm Cortex-M0+ core, 32 MHz operation, 192 KB Flash, USB 2.0 crystal-less connectivity, and a 64-LQFP footprint. It is especially relevant to compact, low-power USB peripherals. Select another MCU if it provides a verified lower power mode, smaller package, larger RAM, more analog resources, or guaranteed long-term supply without redesign.
Is the STM32L072RZT6 suitable for battery-powered instrumentation?
The STM32L072RZT6 is suitable for battery-powered instrumentation when its low-power modes can meet the product's duty-cycle requirement. The manufacturer positions the STM32L0 family as ultra-low-power, and the device includes 192 KB Flash for firmware plus USB connectivity for configuration or data transfer. Validate sleep current, wake-up time, analog accuracy, and USB power consumption in the intended system rather than relying on a single headline specification.
Where can I buy STM32L072RZT6 online?
Use the Request a Quote form on this page to ask for STM32L072RZT6 availability, current lead time, minimum order quantity, and a firm quotation. The verified search results identify exact-MPN listings and show that supply channels exist, but they do not provide a complete quantity-break table suitable for structured price extraction. A quotation also lets the sourcing team confirm the 64-LQFP package, manufacturer, and lifecycle requirements.
What is the price of STM32L072RZT6?
Use the Request a Quote form on this page for the current STM32L072RZT6 quotation. The verified listings include marketplace price references, but they do not print the required explicit quantity-break prices for the exact ordering code, so no static amount is reproduced in the structured pricing field. The quote should confirm unit pricing, quantity breaks, stock, lead time, and whether the supplied package and temperature grade match the intended design.
What is the lead time for STM32L072RZT6?
The current lead time for STM32L072RZT6 should be requested through the Request a Quote form on this page. One verified marketplace listing shows in-stock inventory but reports its delivery estimate as requiring confirmation, while other exact-MPN listings do not provide a complete, consistently dated lead-time statement. A sourcing confirmation should cover available quantity, scheduled delivery, and any manufacturer or distribution allocation constraints.
Is STM32L072RZT6 in stock?
Stock availability for STM32L072RZT6 should be confirmed through the Request a Quote form on this page. A verified marketplace result reports in-stock components, but marketplace inventory can change rapidly and may not represent the quantity needed for a production build. Request the current stock position, scheduled delivery date, and allocation status for the exact 64-LQFP ordering code.
Is STM32L072RZT6 compliant with RoHS and REACH?
The RoHS and REACH status of STM32L072RZT6 is not explicitly confirmed by the verified product pages and should be checked against the manufacturer product documentation or the compliance declaration for the exact ordering code. Do not infer regulatory status solely from the package family or distributor metadata. For a released product, request the current declaration, including lead-free and halogen-free statements if those are contractual requirements.
How do I design a PCB for STM32L072RZT6?
Start the STM32L072RZT6 PCB layout with the official 64-LQFP footprint and pin-description table. Place the mandatory power, ground, reset, boot, and decoupling connections exactly as shown in the manufacturer reference schematic, then route the USB D-plus and D-minus pair as a short controlled-impedance differential pair. Keep sensitive analog and clock routing away from fast USB edges, and follow the datasheet's land-pattern and assembly requirements.

داتای سەرچاوەی ئەندازیاری بۆ STM32L072RZT6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the STM32L072RZT6 when the design needs the STM32L0 low-power platform, USB 2.0 crystal-less connectivity, an Arm Cortex-M0+ core operating up to 32 MHz, and at least 192 KB of Flash in a 64-LQFP package. It is particularly suitable for compact sensors, configuration adapters, portable instruments, and industrial modules where low-power behavior and USB matter more than high-speed computation. Confirm SRAM, voltage limits, pin-level USB requirements, and software support before release. Do not select it merely because another MCU also uses LQFP packaging; pin assignments, memory maps, peripherals, and firmware behavior must match. If a verified alternative cannot meet the same electrical and functional requirements, retain the STMicroelectronics device and qualify a second source rather than accepting an unverified substitution.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە
Manufacturer STMicroelectronics
Package 64-LQFP (10 x 10 mm)
Processor Core Arm Cortex-M0+
CPU Frequency 32 MHz
Flash Memory 192 KB
Flash Organization 192K x 8
USB Support USB 2.0 crystal-less
Architecture 32-bit

جیاکەرەوە سەرەکییەکان

  • USB connectivity without a crystal requirement (بەراورد بەGeneric low-power MCUs without USB)
  • Substantial embedded Flash in a compact 64-LQFP device (بەراورد بەSmaller low-power STM32 MCUs)
  • Balanced embedded processing and low-power family positioning (بەراورد بەSTM32F103RGT6TR)

تێبینییەکانی دیزاین

Begin with the manufacturer 64-LQFP land pattern and pin-description table. Place every required bypass capacitor at the associated power pins with the shortest possible current path, connect ground returns to the appropriate plane, and maintain the recommended copper and solder-mask geometry. Do not assign USB, reset, boot, clock, or GPIO functions from memory because ordering-code variants can differ in peripheral availability.

Route USB D-plus and D-minus as a short, symmetric differential pair with continuous reference-plane support and no intervening layer changes. Keep the pair away from switching nodes and high-current return paths, and follow the manufacturer layout guidance for the crystal-less USB implementation. Firmware must also enable the appropriate clock and USB configuration, since a correct PCB alone cannot compensate for incorrect peripheral setup.

Validate the complete power tree before schematic release. Confirm the STM32L072RZT6 core, I/O, analog, and USB voltage limits from the manufacturer datasheet, then select a regulator whose transient response and ripple are appropriate for the design. Estimated power-consumption calculations should use actual input and output voltages, load current, regulator efficiency, and the MCU's measured duty cycle rather than a generic current rating.

Avoid treating a package match as proof of interchangeability. A genuine substitute must match all 64 electrical assignments, supply requirements, memory organization, USB behavior, peripheral mapping, clock configuration, and firmware assumptions. After schematic review, perform boot, clock, USB enumeration, low-power, brownout, and peripheral regression tests because software configuration can differ even when the physical footprint is identical.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The verified manufacturer product page and distributor excerpts do not explicitly state the requested compliance declarations for the exact ordering code. Confirm current RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification documents with the manufacturer before release.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

STM32L072RZT6 datasheet STM32L072RZT6 pinout STM32L072RZT6 datasheet pdf STM32L072RZT6 specifications STM32L072RZT6 equivalent STM32L072RZT6 replacement STM32L072RZT6 cross reference STM32L072RZT6 LQFP64 footprint STM32L072RZT6 USB sensor STM32L072RZT6 price STM32L072RZT6 stock STMicroelectronics STM32L072RZT6

پێکهاتە و زاراوە پەیوەندیدارەکان

STMicroelectronics STM32L072RZT6 STM32L072RZ STM32L0 STM32L073RZT6 Arm Cortex-M0+ 32-bit microcontroller ultra-low-power microcontroller embedded processor semiconductor USB 2.0 crystal-less USB 192 KB Flash 192K x 8 32 MHz 64-LQFP LQFP package family surface-mount package USB-connected sensor battery-powered data logger industrial control module portable measurement instrument low-power wearable controller Arm Cortex-M0+ core
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ