STM32L073CZT6 - 32MHz Cortex-M0+ 192KB Flash MCU | STMicroelectronics
MPN: STM32L073CZT6 ✓ چالاکSTM32L073CZT6 گشتی
An ultra-low-power microcontroller is an integrated circuit optimized to minimize energy consumption during active operation, sleep, and low-power standby states. The STM32L0 series belongs to the Arm Cortex-M microcontroller hierarchy and combines general-purpose control, analog measurement, firmware storage, and communication interfaces in one device. This makes it suitable for portable instruments, industrial sensors, connected accessories, and low-energy data-acquisition equipment.
Principal features include a 32 MHz Arm Cortex-M0+ processor, 192 KB Flash memory, 20 KB SRAM, 6 KB EEPROM, and USB 2.0 support. The analog subsystem includes a 10-channel, 12-bit ADC and a two-channel, 12-bit DAC. Low-power design features include selectable crystal oscillators, a real-time-clock oscillator, low-power brownout detection, programmable voltage detection, and multiple sleep modes. The operating temperature range is -40°C to 85°C.
The STM32L073CZT6 uses a compact 48-LQFP package with a 0.5 mm pitch. Its USB implementation supports crystal-less operation, reducing the component count and board area required for USB connectivity. The Cortex-M0+ instruction set is suitable for control loops, protocol handling, and modest signal-processing workloads without the memory requirements of a higher-performance Cortex-M core.
Typical applications include USB-connected sensors, compact industrial control modules, low-power instrumentation, handheld meters, battery-operated monitoring equipment, and embedded systems that require analog conversion alongside USB communication. Designers can use the ADC for analog inputs, the DAC for controlled analog outputs, and the USB peripheral for data exchange or programming.
PCB implementation should preserve the LQFP-48 land pattern and route USB data lines as a controlled-impedance differential pair. Decoupling capacitors should be placed close to the supply pins, while oscillator and analog grounding should follow the pin-description and layout guidance in the manufacturer datasheet. The 7 x 7 mm package still requires careful thermal and assembly planning at higher switching rates.
This product page combines manufacturer specifications, engineering application guidance, structured alternatives, and design considerations to support faster component selection and PCB implementation. It also distinguishes exact drop-in hardware compatibility from parts that require firmware, peripheral, package, or qualification review before substitution.
جێگرەوەکانی جێگۆڕکێ بۆ STM32L073CZT6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32L073CZT6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە ADC, Core, Package, Timers, Communication Interfaces.
STM32L071CZT6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32L072CZT6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32L076CZT6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32L073CCT6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32L073RZT6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32L073CZT6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | Ultra-low-power 32-bit microcontroller |
| CPU Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 192 KB |
| RAM | 20 KB |
| EEPROM | 6 KB |
| ADC Resolution | 12 bit |
| ADC Channel Count | 10 channels |
| DAC Resolution | 12 bit |
| DAC Channel Count | 2 channels |
| USB Interface | USB 2.0 crystal-less |
| High-Speed Oscillator Range | 1 MHz to 25 MHz |
| Low-Speed Oscillator | 32 kHz |
| مەودای پلەی گەرمیی کارکردن | -40°C to 85°C |
| ڤۆڵتیەی دابینکردن | 2.5 V to 3.3 V |
| پاکێج | 48-LQFP (7 x 7 mm) |
| جۆری دامەزراندن | Surface mount |
ڕێنمایی ڕێکخستنی پینی STM32L073CZT6 48-lqfp (7 x 7 mm)
ڕێکخستنی پین بۆ STM32L073CZT6 (پاکێجی 48-lqfp (7 x 7 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32L073CZT6.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
STM32L073CZT6 گونجاوە بۆ 6 بەکارھێنانs: USB-Connected Environmental Sensor, Portable Industrial Data Logger, USB Programmable Control Module, Battery-Operated Field Meter, Low-Power Instrumentation Front End, USB Audio and Control Interface.
USB-Connected Environmental Sensor
The STM32L073CZT6 fits a USB-connected environmental sensor because it combines USB 2.0 crystal-less connectivity with a 10-channel, 12-bit ADC in a compact 48-LQFP package. Its 32 MHz Arm Cortex-M0+ core can digitize multiple analog inputs, apply calibration, and format data for a host computer. The crystal-less USB implementation reduces oscillator and component requirements, although enumeration behavior and suspend current must be checked carefully. Power-rail decoupling, controlled-impedance USB routing, and analog grounding are essential for a reliable sensor interface.
پێشنیارکراو
Portable Industrial Data Logger
The STM32L073CZT6 is suitable for a portable industrial data logger because its 192 KB Flash, 20 KB RAM, 6 KB EEPROM, and low-power operating modes support parameter storage and long-duration acquisition. The 10-channel 12-bit ADC can monitor analog process inputs, while the two-channel 12-bit DAC can provide excitation or test signals where required. Designers should define acquisition rates, sampling timing, data-retention strategy, and low-power wake behavior before fixing the firmware configuration.
پێشنیارکراو
USB Programmable Control Module
The STM32L073CZT6 works well in a USB programmable control module because its USB 2.0 interface supports host connectivity and its 32 MHz Cortex-M0+ core provides dedicated control performance. Engineers can implement configuration storage, instrument commands, status reporting, and real-time control without adding a separate communications processor. The module design should include a stable 3.3 V supply, controlled-impedance USB traces, proper bus termination, and firmware recovery paths for programming or bootloader updates.
پێشنیارکراو
Battery-Operated Field Meter
The STM32L073CZT6 suits a battery-operated field meter where low energy use, analog measurement, and USB recharging or data transfer are important. Its Cortex-M0+ core can operate peripherals only when required, while low-power sleep and standby modes can reduce consumption between readings. The two-channel 12-bit DAC supports calibration or stimulus functions, and the 10-channel ADC supports sensor multiplexing. Battery life depends on the actual duty cycle, USB attachment state, analog front-end loading, and the selected regulator topology.
پێشنیارکراو
Low-Power Instrumentation Front End
The STM32L073CZT6 can serve as the control and conversion core of a low-power instrumentation front end. Its 12-bit ADC and DAC provide the core conversion functions, while the 32 MHz processor performs scaling, calibration, filtering, and communication framing. The MCU must be paired with low-noise analog conditioning, reference design, and power-supply layout appropriate to the required measurement accuracy. Verify the manufacturer's ADC accuracy, DAC settling, and reference-voltage conditions before defining system error budgets.
پێشنیارکراو
USB Audio and Control Interface
The STM32L073CZT6 can implement a compact USB audio and control interface because it combines USB connectivity, general-purpose real-time control, and 12-bit conversion resources. A basic interface can use the DAC for low-level output or control signals and the ADC for input monitoring, although clocking and conversion quality must satisfy the audio specification. Designers should assess the device's USB audio-class support, sample-clock architecture, analog output path, and electromagnetic compatibility before committing to this implementation.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ STM32L073CZT6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | STM32L071CZT6 | STM32L072CZT6 | STM32L076CZT6 | STM32L073CCT6 | STM32L073RZT6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) |
| CPU Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| USB 2.0 Crystal-Less Support | Yes | No | No | Yes | Yes | Yes |
| Supply Voltage | 2.5 V to 3.3 V | 2.5 V to 3.3 V | 2.5 V to 3.3 V | 2.5 V to 3.3 V | 2.5 V to 3.3 V | 2.5 V to 3.3 V |
| Operating Temperature | -40°C to 85°C | -40°C to 85°C | -40°C to 85°C | -40°C to 85°C | -40°C to 85°C | -40°C to 85°C |
جیاکەرەوە سەرەکییەکان
- USB connectivity is integrated with the ultra-low-power MCU feature set (بەراورد بەSTM32L071CZT6)
- Combines conversion and communications in one compact package (بەراورد بەSTM32L072CZT6)
- Established 192 KB Flash configuration for firmware and data (بەراورد بەSTM32L073CCT6)
- Same 48-LQFP footprint supports PCB reuse within the STM32L0 family (بەراورد بەSTM32L073RZT6)
تێبینییەکانی دیزاین
Implement the 48-LQFP footprint from the manufacturer land-pattern dimensions and pin-description table. Keep the USB D+ and D- pair short, continuous, impedance controlled, and away from switching nodes. Place the required USB transceiver and power-path components near their associated pins. The USB connector, ESD protection, and series-resistance placement should follow the STM32L073 reference configuration and USB layout guidance.
Provide a stable 2.5 V to 3.3 V rail and place the manufacturer-recommended decoupling network directly at the supply and ground pins. Separate sensitive analog ground paths from high-current or digital return paths where the board architecture permits. Check USB-attached current, regulator dropout, startup sequencing, and the load transient created by analog or digital peripherals before fixing the power-supply topology.
Route oscillator circuits with short ground returns and position them away from USB, ADC inputs, and fast-switching circuitry. Use continuous ground planes beneath the MCU where practical, and keep analog input traces short and isolated from digital signals. Verify the ADC source impedance, sampling time, DAC output loading, and reference-source requirements in the manufacturer datasheet rather than selecting capacitors and resistors solely from generic MCU guidance.
Do not treat an LQFP footprint match as proof of functional equivalence. Before substituting another STM32L0 device, compare USB availability, memory size, ADC and DAC channels, peripheral assignments, clock sources, bootloader support, pin definitions, and software drivers. Firmware should also be retested because device feature masks and peripheral implementations can differ even when the physical package is identical.
زانیاری پابەندبوون
Compliance status should be confirmed from the current STMicroelectronics product declaration for the ordered STM32L073CZT6 configuration.