STM32L433RCI6 - 80MHz Cortex-M4 256KB MCU | STMicroelectronics
MPN: STM32L433RCI6 ✓ چالاکSTM32L433RCI6 گشتی
An ultra-low-power microcontroller is a semiconductor designed to perform control, measurement, and communication tasks while minimizing energy consumption. The STM32L4 family belongs to the Arm Cortex-M4 microcontroller, embedded-processor, and power-management semiconductor hierarchy. Its low-power operating modes are useful in battery-powered equipment where the difference between active processing and standby current can determine how long a product operates between service intervals.
Key features of the STM32L433RCI6 include its 80 MHz maximum core frequency, 256 KB of embedded Flash, 64 KB of SRAM, Arm Cortex-M4 instruction set, and hardware floating-point unit. The device also provides USB full-speed connectivity and LCD support. According to the manufacturer datasheet, its operating-temperature options extend from -40 °C to 85 °C, 105 °C, or 125 °C, depending on the selected device variant. A 200 nA VBAT mode supports the real-time clock and 32 by 32-bit backup registers.
The STM32L4 architecture combines several low-power modes with peripheral activity management, allowing unused peripherals and clock domains to remain inactive. Its 1.71 V to 3.6 V operating range supports low-voltage battery systems and regulated industrial rails. The external SMPS option can support a more efficient multi-rail implementation when the board topology and firmware configuration permit it. The USB full-speed interface is particularly relevant to portable instruments, accessories, and data-logging equipment.
Typical applications include low-power USB data loggers, compact sensor-hub controllers, industrial monitoring equipment, medical-device interface modules, connected accessories, and battery-powered test instruments. The combination of 80 MHz processing performance, 256 KB Flash, and 64 KB SRAM is suitable for moderate control workloads that require several communication interfaces or local data buffering without moving to a higher-density microcontroller.
Designers should verify pin multiplexing, package-specific functions, decoupling, clock configuration, and boot requirements against the manufacturer datasheet and reference manual. Confirm the exact USB and LCD peripheral instance mappings before assigning board signals, and validate the power budget across run, stop, standby, and VBAT backup modes for the intended battery life.
This product page combines manufacturer specifications, package details, application guidance, comparison parameters, and practical design notes to support faster component selection. It also identifies same-package replacement candidates and highlights the firmware, pin-mapping, and power-mode checks required before approving any substitute.
جێگرەوەکانی جێگۆڕکێ بۆ STM32L433RCI6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32L433RCI6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Processor Core, Flash Memory, Product Type, External SMPS Support.
STM32L433RCT6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32L433RCC6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32L433RCG6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32L476RCI6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32L476RCT6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32L433RCI6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M4 with floating-point unit |
| Maximum CPU Frequency | 80 MHz |
| Flash Memory | 256 KB |
| SRAM | 64 KB |
| ڤۆڵتاژی دابینکردنی کارکردن | 1.71 V to 3.6 V |
| VBAT Backup Current | 200 nA |
| USB Interface | USB full-speed |
| LCD Support | Yes |
| External SMPS Support | Yes |
| Real-Time Clock Backup Registers | 32 x 32-bit |
| Processor Performance | 100 DMIPS |
| مەودای پلەی گەرمیی کارکردن | -40 °C to 85/105/125 °C |
| پاکێج | 64-UFBGA, 5 mm x 5 mm |
| جۆری دامەزراندن | Surface mount |
ڕێنمایی ڕێکخستنی پینی STM32L433RCI6 64-ufbga, 5 mm x 5 mm
ڕێکخستنی پین بۆ STM32L433RCI6 (پاکێجی 64-ufbga, 5 mm x 5 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32L433RCI6.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
STM32L433RCI6 گونجاوە بۆ 6 بەکارھێنانs: USB Connected Data Logger, Industrial Sensor Hub, Battery-Powered Sensor Controller, Medical Device Interface Module, Connected Metering Equipment, Portable Test and Measurement Device.
USB Connected Data Logger
The STM32L433RCI6 fits a USB data logger because it combines an 80 MHz Arm Cortex-M4 processor, 256 KB of Flash, 64 KB of SRAM, and USB full-speed connectivity. Firmware can sample sensors, maintain a local data buffer, format records, and transfer them over USB while leaving the low-power modes available between acquisition windows. The 1.71 V to 3.6 V operating range supports compact battery-powered designs, although the complete current budget must include the sensor loads, USB attachment state, flash activity, and any regulator losses. A production design should confirm the exact USB pins, regulator topology, decoupling, and enumeration behavior against the 64-UFBGA documentation.
پێشنیارکراو
Industrial Sensor Hub
The STM32L433RCI6 is appropriate for an industrial sensor hub that must aggregate measurements from several low-speed sensors while keeping the processor active only when required. Its 80 MHz Cortex-M4 core provides headroom for protocol handling and local control, while 256 KB of Flash supports firmware, calibration tables, and configuration data. The 64 KB of SRAM allows temporary buffering without continuous external-memory access. Its 1.71 V minimum operating voltage broadens compatibility with regulated sensor-rail architectures, but industrial qualification requirements must be checked for the exact suffix. Validate isolation, surge protection, grounding, and watchdog behavior rather than assuming that low power alone satisfies an industrial installation.
پێشنیارکراو
Battery-Powered Sensor Controller
The STM32L433RCI6 can serve as the central controller in a battery-powered sensor assembly because its STM32L4 architecture emphasizes low-power operation and provides a 200 nA VBAT mode for maintaining the real-time clock and backup registers. The main processing domain can wake periodically, acquire readings, apply filtering, and return to a low-power state. This architecture is useful when measurements must remain timestamped across main-power shutdowns. The quoted 200 nA value applies to the VBAT backup path, not total active consumption, so battery sizing must include wake frequency, sensor current, regulator quiescent current, and the duration of each measurement cycle.
پێشنیارکراو
Medical Device Interface Module
The STM32L433RCI6 is suitable for a compact medical-device interface module when low-power operation, local control, and USB connectivity are required. The 80 MHz Cortex-M4 core can execute protocol handling, event processing, and non-safety-critical supervisory functions, while the floating-point unit assists with measurement calculations. Its 1.71 V to 3.6 V supply range and 256 KB of Flash support compact multi-rail hardware. Medical use requires a system-level risk assessment: the exact STM32L433RCI6 grade, applicable safety standard, isolation strategy, reset behavior, and production change-control process must be evaluated independently of the MCU's general-purpose feature set.
پێشنیارکراو
Connected Metering Equipment
The STM32L433RCI6 supports connected metering equipment that combines local measurement, configuration, and a host interface. Its 256 KB of Flash and 64 KB of SRAM are sufficient for calibration coefficients, event logs, protocol stacks, and intermediate measurement data, while USB full-speed provides a straightforward computer connection. The LCD capability can support local status or measurement displays when the selected board uses the corresponding functions. The 64-UFBGA footprint keeps the controller compact but requires careful escape routing and exposed-pad thermal design. Firmware should define secure boot and update behavior, and the analog front end must be designed separately from the digital supply and grounding network.
پێشنیارکراو
Portable Test and Measurement Device
The STM32L433RCI6 is appropriate for a portable test instrument that performs acquisition, signal conditioning in firmware, and result presentation while operating from a rechargeable battery. The 80 MHz Cortex-M4 core supports responsive control and DSP-oriented routines, and 256 KB of Flash provides room for application firmware and calibration data. Low-power modes can reduce consumption when the instrument is idle, while USB full-speed supports connected test workflows. The LCD option enables local menus and readings. Design validation must include analog measurement accuracy, input protection, reference-voltage stability, thermal behavior of the 5 mm UFBGA package, and separation between sensitive measurement paths and digital switching activity.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ STM32L433RCI6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | STM32L433RCT6 | STM32L433RCC6 | STM32L433RCG6 | STM32L476RCI6 | STM32L476RCT6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 64-UFBGA, 5 mm x 5 mm | 64-UFBGA, 5 mm x 5 mm | 64-UFBGA, 5 mm x 5 mm | 64-UFBGA, 5 mm by 5 mm | 64-UFBGA, 5 mm x 5 mm | 64-UFBGA, 5 mm x 5 mm |
| Processor Core | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU |
| Maximum CPU Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Flash Memory | 256 KB | 256 KB | 256 KB | 256 KB | 1 MB | 1 MB |
| SRAM | 64 KB | 64 KB | 64 KB | 64 KB | 128 KB | 128 KB |
| Operating Supply Voltage | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V |
| USB Interface | USB full-speed | USB full-speed | USB full-speed | USB full-speed | USB full-speed | USB full-speed |
| External SMPS | Supported | Supported | Supported | Supported | Supported | Supported |
جیاکەرەوە سەرەکییەکان
- Low-power Cortex-M4 resource balance (بەراورد بەSTM32L476RCI6)
- USB and LCD integration in a compact package (بەراورد بەSTM32L476RCT6)
- Lower Flash requirement for embedded control (بەراورد بەSTM32L476RCI6)
تێبینییەکانی دیزاین
Calculate the average supply current from the duty cycle of each operating mode rather than using only the 200 nA VBAT figure. The STM32L433RCI6 manufacturer datasheet identifies 200 nA for the VBAT path that supports the RTC and backup registers. Include processor activity, flash execution, USB attachment, LCD update rate, sensor loads, regulator quiescent current, and all support components in the battery budget. Derive the regulator topology from the 1.71 V to 3.6 V operating range and confirm the dropout margin at the highest specified load.
Route the 64-UFBGA land pattern exactly from the manufacturer package drawing, including the exposed-pad geometry, solder-mask definition, and paste pattern. Place the required input and bulk capacitors close to their corresponding power pins to minimize supply impedance and switching transients. Provide a continuous ground reference beneath the device and use short return paths for USB, debug, and high-frequency clock signals. Validate the assembly process because the 5 mm by 5 mm package has a compact escape-routing geometry.
Do not assume that two MCUs sharing the 64-UFBGA footprint are firmware-compatible without checking the alternate-function map, clock tree, boot pins, peripheral instances, and memory organization. The STM32L433 and STM32L476 families both use Cortex-M4 processors, but the STM32L476 options provide 1 MB of Flash and 128 KB of SRAM compared with 256 KB and 64 KB in the STM32L433RCI6. Recheck interrupt vectors, peripheral addresses, startup code, and linker settings before approving a substitution.
Separate sensitive analog measurement paths from USB, LCD, and digital clock routing. Keep USB differential traces length-matched, use a continuous reference plane, and place any required support components according to the manufacturer application guidance. For low-power operation, minimize leakage through external pull networks, unused GPIO states, analog inputs, and exposed sensor interfaces. Review the final board for powered-down leakage paths and unintended clock activity rather than relying only on the MCU's low-current specifications.
زانیاری پابەندبوون
The STM32L433xx manufacturer datasheet does not establish the complete material-compliance declarations for the exact STM32L433RCI6 orderable configuration. Request current RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification documents through the Request a Quote form.