STM32L442KCU6 - 80MHz Cortex-M4 256KB MCU | STMicroelectronics
MPN: STM32L442KCU6 ✓ چالاکSTM32L442KCU6 گشتی
An ultra-low-power microcontroller is an integrated circuit optimized to execute firmware while minimizing energy consumption during active operation, standby, and low-power states. The STM32L4 product family combines an Arm Cortex-M4 processor with embedded Flash, RAM, security features, and communication peripherals. This hierarchy places the STM32L442KCU6 in the STM32L4 family of 32-bit embedded processors and makes it suitable for portable, industrial, communications, and connected-device designs.
Key device characteristics include an 80 MHz Cortex-M4 core, 256 KB of Flash, a 32-bit architecture, and operation from 2.5 V and 3.3 V supply levels. The STM32L442KC family also supports USB and AES-256 security functions. These capabilities allow the MCU to handle control logic, communications, secure boot-related processing, data acquisition, and user-interface tasks without requiring a separate processor.
The Cortex-M4 architecture provides instruction-set capabilities suited to real-time embedded control while retaining a compact software model. Its 256 KB of Flash provides room for application firmware, configuration data, and boot code. Integration of USB and AES-256 functions on the same device can reduce component count in designs requiring a secure USB-connected control node, although the final system must account for the exact peripheral set and electrical limits of the selected orderable device.
Typical applications include low-power USB sensor nodes, industrial monitoring modules, portable medical or laboratory equipment, building-control endpoints, and compact communications equipment. The 5 x 5 mm UFQFPN package also supports space-constrained designs where a larger quad-flat package would be inconvenient, although exposed-pad layout and thermal performance require careful PCB implementation.
For PCB design, use the manufacturer's pin-description table when assigning tracks and confirm the exposed-pad connection requirements in the package drawing. Place decoupling capacitors close to the appropriate supply pins and route high-speed or sensitive signals away from noisy power-conversion stages. Firmware integration should begin with the device reference manual and the exact pin package assigned by the orderable part number.
This product page organizes the core specifications, verified sourcing links, same-package alternatives, application guidance, and design considerations for engineers evaluating the STM32L442KCU6. It also provides a structured basis for comparing STM32L4 devices while preserving package and pin-compatibility requirements during replacement planning.
جێگرەوەکانی جێگۆڕکێ بۆ STM32L442KCU6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32L442KCU6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Processor Core, Flash Memory, Product Type, SRAM.
STM32L432KCU6
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32L431KCU6TR
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32L412KBU6TR
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32L422KBU6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32L431KBU6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32L442KCU6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M4 |
| Maximum Core Frequency | 80 MHz |
| Flash Memory | 256 KB |
| Architecture | 32-bit RISC |
| ڤۆڵتیەی دابینکردن | 2.5 V / 3.3 V |
| پاکێج | 32-pin UFQFPN, 5 x 5 mm |
| جۆری دامەزراندن | Surface mount |
| USB Support | Supported |
| Hardware Encryption | AES-256 |
ڕێنمایی ڕێکخستنی پینی STM32L442KCU6 32-pin ufqfpn, 5 x 5 mm
ڕێکخستنی پین بۆ STM32L442KCU6 (پاکێجی 32-pin ufqfpn, 5 x 5 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32L442KCU6.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
STM32L442KCU6 گونجاوە بۆ 6 بەکارھێنانs: USB Connected Sensor Node, Industrial Monitoring Controller, Portable Medical Device Controller, Building Automation Endpoint, Secure Communications Module, Low-Power Data Logger.
USB Connected Sensor Node
The STM32L442KCU6 fits a compact USB sensor node because it combines an 80 MHz Arm Cortex-M4 processor, 256 KB of Flash, USB support, and AES-256 hardware encryption in a 5 x 5 mm UFQFPN package. The processor can acquire sensor data, execute control logic, and format data for a USB host while the low-power MCU architecture supports efficient operation. Place the MCU, USB routing, decoupling, and ESD-protection components with careful attention to signal integrity. The principal design benefit is consolidation of control and secure USB functions into one small device. Before release, confirm the exact USB peripheral configuration, clock requirements, bus voltage tolerance, and exposed-pad layout against the manufacturer documentation.
پێشنیارکراو
Industrial Monitoring Controller
The STM32L442KCU6 is suitable for industrial monitoring functions that combine local control, data acquisition, and communications. Its 80 MHz Cortex-M4 core can service multiple input-control tasks, while 256 KB of Flash provides room for application firmware and configuration data. The 2.5 V and 3.3 V operating levels support common embedded supply arrangements, and the 32-pin 5 x 5 mm package simplifies compact controller assemblies. Use the device to aggregate sensor readings, apply filtering or control logic, and transmit status information. The design must still verify the exact temperature range, analog and digital limits, ESD performance, isolation strategy, and EMC requirements for the target installation before production approval.
پێشنیارکراو
Portable Medical Device Controller
The STM32L442KCU6 can serve as the central controller in a portable medical or laboratory device when the application requires local signal processing, a compact footprint, and controlled power consumption. The 80 MHz Arm Cortex-M4 core supports responsive handling of sensor data and user commands, while 256 KB of Flash accommodates embedded application code. AES-256 hardware encryption can strengthen implementations that require hardware-assisted data protection. Because medical applications depend on application-specific validation, engineers should confirm the exact operating-temperature grade, electrical limits, firmware controls, and documentation obligations. The device should sit within a properly reviewed signal chain, with medical-appropriate isolation, protection, and grounding implemented outside the MCU unless explicitly covered by the complete design.
پێشنیارکراو
Building Automation Endpoint
The STM32L442KCU6 fits building-automation endpoints that monitor environmental conditions or control equipment over a low-power communications network. Its ultra-low-power STM32L4 architecture supports always-installed sensing equipment, while the 80 MHz Cortex-M4 core leaves capacity for protocol handling, local logic, and configuration updates. The 32-pin 5 x 5 mm UFQFPN package helps reduce board area in distributed wall controllers or room modules. Designers can use the MCU for sensor aggregation, relay-control logic, status reporting, and secure communication. Validate the device's low-power mode behavior, wake-up sources, clock accuracy, operating-temperature limits, and communications timing against the installation requirement. PCB placement should isolate sensitive sensor paths from switching nodes and provide local bypass capacitance at the supply pins.
پێشنیارکراو
Secure Communications Module
The STM32L442KCU6 is appropriate for a compact communications module that must process protocol data while adding hardware-assisted protection. Its 80 MHz Arm Cortex-M4 core can handle framing, buffering, and application logic; 256 KB of Flash provides substantial code and firmware-update space; and AES-256 hardware encryption accelerates cryptographic operations. The small 5 x 5 mm package is useful in gateways, remote terminals, and embedded interface modules where board area is constrained. The communications interface determines the required companion components, including transceivers, isolation, or network controllers. Firmware and hardware security should be treated as a complete system requirement, including secure update, key management, physical protection, and fault recovery. Verify timing, voltage, and peripheral availability for the selected communication standard before release.
پێشنیارکراو
Low-Power Data Logger
The STM32L442KCU6 can serve as the processing center of a low-power data logger for environmental, industrial, or portable equipment. The Cortex-M4 core supports timestamp handling, sensor fusion, buffering, and file or communications formatting, while the STM32L4 low-power focus helps reduce energy use between acquisition intervals. The 256 KB of Flash provides space for firmware and local configuration, and the compact UFQFPN package supports small, battery-oriented assemblies. Use the MCU to sample sensors, validate readings, store meaningful events, and transmit batches over a communications link. Engineering validation should cover sleep-current targets, wake-up latency, RAM requirements, data-retention strategy, and the operating-temperature range. A robust design also includes protection against supply loss and controlled recovery after battery replacement.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ STM32L442KCU6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | STM32L432KCU6 | STM32L431KCU6TR | STM32L412KBU6TR | STM32L422KBU6 | STM32L431KBU6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 32-pin UFQFPN, 5 x 5 mm | 32-pin UFQFPN, 5 x 5 mm | 32-pin UFQFPN, 5 x 5 mm | 32-pin UFQFPN, 5 x 5 mm | 32-pin UFQFPN, 5 x 5 mm | 32-pin UFQFPN, 5 x 5 mm |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
جیاکەرەوە سەرەکییەکان
- Higher nominal Flash capacity than lower-capacity STM32L4 package variants (بەراورد بەSTM32L422KBU6)
- Defined USB and AES-256 hardware functions for connected and security-sensitive nodes (بەراورد بەSTM32L412KBU6TR)
- Exact 256 KB, 80 MHz, 32-pin UFQFPN configuration for constrained boards (بەراورد بەSTM32L432KCU6)
تێبینییەکانی دیزاین
Treat the exposed pad as an electrical and thermal design feature rather than an optional copper area. Follow the manufacturer package drawing for pad dimensions, solder-mask and paste recommendations, and the permitted connection of the thermal pad. Place the input and output bypass capacitors close to their associated supply pins, minimize loop area, and provide adequate ground-plane continuity beneath the package. These practices reduce supply-impedance noise and improve heat transfer without changing the nominal 80 MHz or 256 KB device ratings.
Do not treat a matching package as proof that any STM32L4 device is functionally interchangeable. Before substituting STM32L432KCU6, STM32L431KCU6TR, STM32L412KBU6TR, STM32L422KBU6, or STM32L431KBU6, compare every assigned pin, alternate-function mapping, power pin, clock source, interrupt vector, USB configuration, and exposed-pad connection. Then confirm that the toolchain, boot configuration, driver set, and firmware startup code support the replacement. This prevents subtle board or software failures that a footprint-only review cannot reveal.
Route USB, clock, and other timing-sensitive signals over continuous reference planes and away from switching nodes, high-current return paths, and noisy inductors. Keep the USB data path compact, provide the required series impedance elements where the device and connector interfaces call for them, and observe the manufacturer's external-component recommendations. For low-power sensor designs, separate analog input routing from digital switching activity and validate the completed board across the intended clock range and operating modes.
Design the supply network around the device's specified operating levels, 2.5 V and 3.3 V, without assuming that both rails must be present simultaneously. Confirm the exact operating-voltage range and decoupling network in the manufacturer datasheet for the selected device and temperature grade. Keep startup sequencing within the electrical limits, control inrush through the source impedance, and test the system during rapid power transitions because firmware-enabled peripherals may influence current demand during boot.
زانیاری پابەندبوون
The STM32L442KC product family is an industrial microcontroller family rather than an AEC-Q100 automotive-qualified variant. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or declaration for the exact orderable device.