STM8S207CBT6 - 24MHz 128KB Flash 8-Bit MCU | STMicroelectronics
MPN: STM8S207CBT6 ✓ چالاکSTM8S207CBT6 گشتی
An 8-bit microcontroller is a compact computing platform that integrates a CPU core, program Flash, data RAM, I/O ports, timers, communication interfaces, and reset and clock circuitry on one package. Within the product hierarchy, the STM8S207CBT6 belongs to the STM8S high-density performance line, combining an 8-bit architecture with a 24 MHz clock and extended peripheral resources for control-oriented embedded products.
Key features include 24 MHz maximum CPU frequency, 128 KB of Flash memory organized as 128 K x 8, a multi-pin LQFP package, and the STM8S peripheral set. According to the manufacturer STM8S20xxx datasheet, the family covers devices with 32 KB to 128 KB of Flash and is intended for applications requiring a balance of processing speed, memory, and low-cost integration. The STM8S207CBT6 is ordered in the temperature range indicated by the T6 suffix and ships in a tape-and-reel format for automated assembly.
The STM8S architecture supports embedded control workloads such as keypad and display management, industrial communication, sensor acquisition, and supervisory control. Its 24 MHz performance provides additional timing headroom for interrupt-driven control loops, while 128 KB of Flash allows larger application code, lookup tables, and protocol stacks than smaller STM8 devices. Designers should still verify peripheral availability, pin multiplexing, clock limits, and electrical limits against the device-specific sections of the STM8S20xxx datasheet.
Because the STM8S207CBT6 uses the STM8S peripheral architecture, existing STM8 code, driver structures, and tool-chain workflows can be reused. STMicroelectronics tools such as ST-LINK, STM8CubeProgrammer, and STM8CubeMX support the programming and configuration workflow. Confirm the exact debugger, bootloader, and application-note requirements for the deployed firmware before layout sign-off.
When planning the PCB, reserve the LQFP-48 footprint with the manufacturer-recommended pad dimensions and land pattern, connect all supply pins, and place decoupling capacitors close to each supply pin. This page consolidates verified part identity, memory and speed data, same-family alternatives, and practical design guidance for engineers evaluating a second source or redesign around the STM8S207CBT6.
جێگرەوەکانی جێگۆڕکێ بۆ STM8S207CBT6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM8S207CBT6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Timers, Product Type, RAM, CAN.
STM8S207CBT3
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →STM8S207C8T6
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →STM8S207SBT6C
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →STM8S208S6T6C
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →STM8S207CBT6TR
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM8S207CBT6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 8-bit performance-line microcontroller |
| Series | STM8S20xxx high-density performance line |
| Maximum CPU Frequency | 24 MHz |
| Flash Program Memory | 128 KB (128K x 8) |
| Program Memory Type | Embedded Flash |
| CPU Architecture | 8-bit |
| پاکێج | LQFP-48 |
| جۆری دامەزراندن | Surface mount |
| Ordering Code Suffix | T6 |
| Program Memory Range | 32 KB to 128 KB across the STM8S20xxx family |
| Core Wait States | 0 wait states at the maximum operating condition stated for the STM8S20xxx family |
| Programming Support | STM8S in-circuit programming workflow |
ڕێنمایی ڕێکخستنی پینی STM8S207CBT6 lqfp-48
ڕێکخستنی پین بۆ STM8S207CBT6 (پاکێجی lqfp-48). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM8S207CBT6.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
STM8S207CBT6 گونجاوە بۆ 6 بەکارھێنانs: Industrial Control and Automation, Sensor Acquisition and Data Loggers, Communications Equipment and Gateways, Appliance and Embedded Control Panels, Programmable Logic and Relay Controllers, Consumer and Accessory Electronics.
Industrial Control and Automation
The STM8S207CBT6 suits compact industrial controllers because its 24 MHz core provides useful control-loop headroom and its 128 KB Flash holds supervisory logic, parameter tables, and communication routines. A typical design places the MCU beside sensor front ends, relay or transistor drive stages, and an isolated communications interface. Compared with a smaller-memory STM8S device, the 128 KB program area reduces the chance of an immediate firmware-size redesign and leaves room for field-upgrade logic. Verify ADC accuracy, timer outputs, and supply tolerances in the STM8S20xxx datasheet before assigning precision analog channels.
پێشنیارکراو
Sensor Acquisition and Data Loggers
The STM8S207CBT6 can act as the central controller for a multi-channel acquisition or logging module. Its 128 KB Flash accommodates calibration coefficients, sampling state machines, and event buffers, while the 24 MHz operating rate supports interrupt-driven sampling and front-end control. Place analog inputs through the application-defined conditioning network, then use the MCU's digital peripherals for channel selection, trigger handling, and data transfer. Check the ADC timing, reference voltage, and pin multiplexing in the manufacturer datasheet because peripheral availability determines the usable channel count and sampling strategy.
پێشنیارکراو
Communications Equipment and Gateways
The STM8S207CBT6 fits protocol-concentrating equipment that combines local control with serial communications. Its 128 KB Flash provides room for protocol stacks, configuration handling, and device-identification tables, while multiple timer and serial resources support deterministic message timing. In a gateway design, the MCU can poll sensors, validate frames, update local status, and drive indicators or isolated outputs. The exact UART, SPI, and I2C resources must be checked against the device pin table because alternate-function assignment can change which ports are available for each interface.
پێشنیارکراو
Appliance and Embedded Control Panels
The STM8S207CBT6 is appropriate for appliance controllers and human-interface panels that combine display updates, key scanning, motor or relay control, and fault logging. The 128 KB Flash can hold UI state machines, lookup tables, and diagnostic code, and the 24 MHz clock allows responsive debouncing and display-refresh scheduling. Place the MCU centrally so that display, button, and communication traces remain short and keep switching or motor-drive nodes away from sensitive analog inputs. Validate the exact display interface requirements against the available peripheral mix before selecting it for a new control-panel architecture.
پێشنیارکراو
Programmable Logic and Relay Controllers
The STM8S207CBT6 can implement a compact programmable controller for relays, lamps, and general industrial outputs. Its 24 MHz processing supports fast state transitions and timing loops, while 128 KB of Flash accommodates configuration logic, schedules, and safety checks. Use timer outputs for repetitive switching where possible and isolate any inductive load so switching transients do not reach the MCU supply pins. Validate the number and electrical ratings of the available GPIO and timer outputs in the device pin and electrical-characteristics tables, since the package is the primary limit on parallel channel count.
پێشنیارکراو
Consumer and Accessory Electronics
The STM8S207CBT6 can serve as the control hub in a connected accessory, small appliance, or system accessory that needs a mix of local logic and serial connectivity. The 24 MHz core and 128 KB Flash provide room for a boot sequence, device management, and communication protocol handling without moving immediately to a larger MCU family. Firmware can supervise buttons, indicator LEDs, sensors, and an external transceiver while keeping the design in a widely available 8-bit ecosystem. Confirm whether the required interface mix is supported by the LQFP-48 pinout and whether the low-power requirements justify choosing a more power-focused STM8 variant instead.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ STM8S207CBT6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | STM8S207CBT3 | STM8S207C8T6 | STM8S207SBT6C | STM8S208S6T6C | STM8S207CBT6TR |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | LQFP-48 | LQFP-48 | LQFP-48 | LQFP-48 | LQFP-48 | LQFP-48 |
| Maximum CPU Frequency | 24 MHz | 24 MHz | 24 MHz | 24 MHz | 24 MHz | 24 MHz |
| CPU Architecture | 8-bit | 8-bit | 8-bit | 8-bit | 8-bit | 8-bit |
| Series | STM8S207 performance line | STM8S207 performance line | STM8S207 performance line | STM8S207 performance line | STM8S208 performance line | STM8S207 performance line |
| Operating Temperature Grade | T6 suffix | T3 suffix | T6 suffix | T6 suffix with additional grade designation | T6 suffix with additional grade designation | T6 suffix |
جیاکەرەوە سەرەکییەکان
- Largest verified Flash option among the listed STM8S207CB alternatives (بەراورد بەSTM8S207C8T6)
- Same STM8S207CB family and LQFP-48 footprint (بەراورد بەSTM8S207CBT3)
- Performance-line Flash capacity with the same 48-pin land pattern (بەراورد بەSTM8S208S6T6C)
- Identical device configuration with an orderable reel designation (بەراورد بەSTM8S207CBT6TR)
تێبینییەکانی دیزاین
Generate the LQFP-48 land pattern from the mechanical drawing and recommended footprint in the STM8S20xxx datasheet rather than from a generic 48-pin library symbol. Keep the exposed supply and ground connections in the recommended pad arrangement, confirm pin 1 orientation, and verify paste volume for the fine lead pitch. Check courtyard clearance because the LQFP body is larger than many low-pin-count alternatives and can restrict routing around the device.
Follow the manufacturer supply-pin and decoupling guidance for every VDD and VSS connection, including any analog or regulator-related pins shown in the device-specific pin table. Place the required bulk and high-frequency capacitors close to their associated pins and provide a low-impedance return path for switching return current. Validate the power source for the 24 MHz operating condition, including startup and regulator tolerance, before finalizing the BOM.
Do not substitute an STM8S207CB variant by matching only the package and Flash size. The ordering suffix can encode temperature grade, qualification, or shipment information, and a different Flash option can break the application image if it exceeds 64 KB. Review the manufacturer ordering-information table, compare the complete suffix, confirm peripheral assignments, and perform a hardware and firmware regression test before releasing an alternate-source BOM.
Assign communication and high-speed signal pins before finalizing peripheral functions because STM8 port pins commonly support alternate functions. Route sensitive analog inputs away from switching-node copper and clocks, keep I2C lines short with appropriate pull-up placement, and avoid long unprotected traces connected to external connectors. Use the device pin table to verify that the chosen port assignments do not conflict with oscillator, debug, or programming functions.
زانیاری پابەندبوون
No explicit compliance declaration was present for the exact orderable code. Confirm RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals status with STMicroelectronics or the authorized supplier before using the device in regulated production.