STMicroelectronics

STM8S207K6T6C - 24MHz 32KB 8-Bit MCU | STMicroelectronics

MPN: STM8S207K6T6C ✓ چالاک
3.3 V or 5 V Vdss 32-pin LQFP Package 24 MHz Speed 32 KB Memory
MOQ: 1 |

STM8S207K6T6C گشتی

STMicroelectronics STM8S207K6T6C is an 8-bit STM8S performance-line microcontroller with a 24 MHz maximum CPU frequency, 32 KB of Flash program memory, and a 32-pin LQFP package. It combines an advanced STM8 CISC core with integrated EEPROM, a 10-bit ADC, timers, two UARTs, SPI, I²C, and CAN interfaces. The device operates from a 3.3 V or 5 V supply, making it suitable for embedded control, communications, sensing, and industrial automation systems.

An 8-bit microcontroller is a compact programmable controller that integrates a CPU, memory, and peripheral interfaces into one semiconductor package. The STM8S207 belongs to the STM8 performance line, a branch of the STM8 8-bit MCU family within the broader embedded-controller and semiconductor hierarchy. Its Harvard-style memory organization separates program execution from data access, supporting efficient control-loop operation while allowing firmware and working data to use separate memory spaces.

The STM8S207K6T6C reaches 24 MHz with zero wait states at 16 MHz, according to the manufacturer documentation. Its 32 KB Flash capacity provides room for application firmware, while integrated EEPROM supports nonvolatile parameter storage. The 10-bit ADC permits analog measurements, and the two UARTs, SPI, I²C, and CAN interfaces support multiple communication topologies without requiring entirely separate serial controller ICs. A broad timer complement is useful for periodic tasks, motor timing, input capture, and pulse-width-related control.

The advanced STM8 core uses a Harvard architecture and a three-stage pipeline, balancing predictable interrupt-driven behavior with modest instruction-level parallelism. This architecture is particularly effective in real-time embedded designs where deterministic peripheral servicing is more valuable than maximum software throughput. On-chip communications and analog conversion also reduce board complexity and help preserve package space in compact controllers.

Typical uses include industrial sensor nodes, CAN-connected equipment, motor-control peripherals, keypad interfaces, building-control modules, and compact communication bridges. The CAN and RS-485-oriented UART resources are useful for industrial networking, while SPI and I²C suit sensors, displays, memory devices, and board-level expansion. The 32-pin LQFP is easy to assemble and inspect during prototype rework.

PCB design should preserve clean decoupling around VDDA and VSSA, route high-current and communication interfaces away from sensitive analog inputs, and provide test access to reset and programming signals. Confirm the exact clock, reset, and peripheral-pin assignments in the manufacturer pin-description table before final routing because firmware configuration determines which functions can be assigned to a given pad.

This product page consolidates the core device characteristics, same-family replacement options, interface-level application guidance, and practical PCB considerations. It supports faster component selection by organizing clock, memory, analog, communications, package, and substitution information in one engineering-oriented reference.

جێگرەوەکانی جێگۆڕکێ بۆ STM8S207K6T6C — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM8S207K6T6C (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, ADC Resolution, Product Type, Flash Program Memory, Supply Voltage.

Silicon Labs
Package: 32-LQFP (7x7 mm)
Product Type: 8-bit mixed-signal USB Flash microcontroller
Supply Voltage: 2.7 V to 3.6 V
بەراوردکردن لەگەڵ STM8S207K6T6C →
STMicroelectronics
Package: 48-pin LQFP (LFQP)
ADC Resolution: 10 bit
Product Type: 8-bit microcontroller (MCU)
بەراوردکردن لەگەڵ STM8S207K6T6C →
STMicroelectronics
Package: LQFP-32 (7x7 mm)
ADC Resolution: 10-bit
Flash Program Memory: 32 Kbytes
بەراوردکردن لەگەڵ STM8S207K6T6C →
STMicroelectronics
Product Type: 8-bit performance-line microcontroller
بەراوردکردن لەگەڵ STM8S207K6T6C →
STMicroelectronics
Product Type: 8-bit performance-line microcontroller
بەراوردکردن لەگەڵ STM8S207K6T6C →

STM8S207K6T6

✅ جێگرەوەی ڕاستەوخۆ
STMicroelectronics
📦 LQFP-32
STM8 8-bit · 24 MHz · 32 Kbytes · 2 Kbytes · 2 Kbytes · 10-bit · 10 · 2x 16-bit, 1x 8-bit

پەیوەندی بۆ نرخ

بینینی داتاشیت →

STM8S207K8T6C

✅ جێگرەوەی ڕاستەوخۆ
STMicroelectronics
📦 LQFP-32
8-bit performance-line microcontroller · 24 MHz · 64 KB Flash · 64K x 8 bits · 10 bits · 2 · SPI

پەیوەندی بۆ نرخ

بینینی داتاشیت →

STM8S207K8T6C

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
STMicroelectronics
📦 LQFP-32
8-bit performance-line microcontroller · 24 MHz · 64 KB Flash · 64K x 8 bits · 10 bits · 2 · SPI

پەیوەندی بۆ نرخ

بینینی داتاشیت →

STM8S207K8T3

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 LQFP-32
Same STM8S207 family and LQFP-32 footprint; Flash increases from 32 KB to 64 KB and the ordering suffix changes

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

STM8S207K6T3C

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
STMicroelectronics
📦 LQFP-32
8-bit microcontroller (MCU) · STM8S performance line · 24 MHz · 32 KB (32K x 8) · Present · 10 bit · 2 · 1

پەیوەندی بۆ نرخ

بینینی داتاشیت →

STM8S207K6T6C زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Device Type 8-bit microcontroller
Product Series STM8S performance line
Maximum CPU Frequency 24 MHz
Zero-Wait-State Frequency 16 MHz
Flash Program Memory 32 KB
Program Memory Organization 32K x 8 bits
CPU Architecture Advanced STM8 core with Harvard architecture and three-stage pipeline
ADC Resolution 10 bits
UART Count 2
SPI Interface 1 interface
I²C Interface 1 interface
CAN Interface 1 interface
ڤۆڵتیەی دابینکردن 3.3 V or 5 V
پاکێج 32-pin LQFP
جۆری دامەزراندن Surface mount
Delivery Format Tray
Instruction Set 8-bit CISC
RoHS Compliance unknown

ڕێنمایی ڕێکخستنی پینی STM8S207K6T6C 32-pin lqfp

ڕێکخستنی پین بۆ STM8S207K6T6C (پاکێجی 32-pin lqfp). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 32-pin lqfp بۆ STM8S207K6T6C

هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM8S207K6T6C.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

STM8S207K6T6C گونجاوە بۆ 6 بەکارھێنانs: CAN-Connected Industrial Sensor Node, Motor Timing and Auxiliary Controller, Building Control and HVAC Module, Serial Protocol Bridge and Gateway, Battery-Powered Data Logger, Human-Machine Interface Controller.

🏭

CAN-Connected Industrial Sensor Node

The STM8S207K6T6C fits compact sensor nodes that must combine analog measurement with reliable fieldbus communication. Its 10-bit ADC can acquire pressure, temperature, level, or process-variable signals, while the CAN interface supports communication with a broader industrial network. The two UARTs and SPI interfaces can support local service ports, digital sensors, and configuration storage, while 32 KB of Flash provides room for drivers, filtering, diagnostics, and communications logic. At 24 MHz, the controller can service multiple interrupt-driven peripherals without requiring a higher-complexity processor.

⚙️

Motor Timing and Auxiliary Controller

The STM8S207K6T6C is suitable for auxiliary motor-control, actuator, and timing subsystems where several real-time functions must operate from one compact controller. Its timer resources can produce precise periodic timing, capture input pulses, and coordinate actuator sequences, while the 24 MHz core supports responsive state-machine control. The 32-pin LQFP package keeps the design accessible for assembly and prototyping. A designer can use the UART interfaces for tuning or diagnostics and use SPI or I²C to connect position sensors, memory, or a display without adding separate interface controllers.

🏠

Building Control and HVAC Module

The STM8S207K6T6C can manage building-control modules that combine environmental sensing with serial communications. The 10-bit ADC is suitable for temperature, light, potentiometer, and occupancy-sensor inputs, while I²C and SPI support local sensors, display controllers, and nonvolatile data devices. The two UARTs provide channels for service consoles or isolated communications, and CAN can connect the module to a controller network. Its 3.3 V or 5 V operation and 32 KB program memory balance capability with a modest embedded footprint.

🌐

Serial Protocol Bridge and Gateway

The STM8S207K6T6C is well suited to a compact gateway that bridges or multiplexes embedded serial links. Two UARTs can handle two asynchronous channels, SPI can connect to faster local devices, and I²C can serve sensors or configuration chips. The CAN controller adds another communication path for industrial equipment, allowing the same device to translate or aggregate data among several buses. Its 24 MHz core provides sufficient throughput for protocol conversion and buffering, although firmware must account for interrupt latency and the 32 KB Flash limit.

🔋

Battery-Powered Data Logger

The STM8S207K6T6C can serve as the control element in a low-duty-cycle data logger that periodically samples sensors and stores records. The 10-bit ADC handles analog inputs, SPI accommodates flash storage or a digital sensor, and the UART supports configuration or wired synchronization. Low-power operation can be supported by running the processor between measurement events, although sleep currents, wake-up sources, and analog accuracy must be evaluated for the selected operating mode. The 32 KB Flash also holds the acquisition state machine, file formatting, and communication routines.

🖥️

Human-Machine Interface Controller

The STM8S207K6T6C can control compact keypads, status displays, parameter menus, and service interfaces in embedded equipment. GPIO resources support keys and indicators, SPI or I²C can drive a display or input expander, and the UARTs can connect to a host computer or programming fixture. Its 24 MHz performance allows responsive debouncing, menu navigation, and status updates, while the integrated ADC can support analog controls or monitoring. The 32-pin LQFP package provides enough external connectivity for a practical interface while keeping assembly straightforward.

کورتەی بەرهەمە پێشنیارکراوەکان

What are the key specifications of STM8S207K6T6C that engineers should know?
The STM8S207K6T6C is a 24 MHz, 32 KB-Flash 8-bit STM8S microcontroller in a 32-pin LQFP package. According to the manufacturer documentation, it includes integrated EEPROM, a 10-bit ADC, timers, two UARTs, SPI, I²C, and CAN. The device is intended for 3.3 V or 5 V operation and uses an advanced STM8 core with Harvard architecture and a three-stage pipeline. These specifications make it a practical controller for real-time sensing, communications, motor timing, and industrial equipment where several mixed-signal and serial functions are required.
What is the operating voltage of STM8S207K6T6C?
The STM8S207K6T6C operates from a 3.3 V or 5 V supply. The manufacturer product listing identifies both operating systems for this 8-bit STM8S performance-line microcontroller. The internal core clock can reach 24 MHz, while the manufacturer documentation states zero wait states at 16 MHz. Actual signal levels, ADC accuracy, and peripheral performance still depend on the selected external clock, analog supply arrangement, decoupling, and operating temperature, so those conditions should be checked against the manufacturer electrical-characteristics tables during design.
How much Flash and EEPROM does STM8S207K6T6C have?
The STM8S207K6T6C has 32 KB of Flash program memory organized as 32K x 8 bits, and integrated EEPROM is also present. The distributor component description confirms the 32 KB Flash capacity, while the device feature summary identifies integrated EEPROM. The exact EEPROM capacity is not stated on the product listing and must be confirmed in the manufacturer memory-map documentation before it is used for calibration storage or other nonvolatile parameters. Its 24 MHz CPU speed provides more processing headroom than typical low-cost 8-bit controllers.
Where can I download the STM8S207K6T6C datasheet PDF?
The STM8S207K6T6C datasheet and technical documentation are available through the manufacturer’s STM8S207K6 product page. That official page is the preferred starting point because it provides the current device documentation, family characteristics, and supporting resources. The manufacturer PDF describes the complete pin configuration, electrical characteristics, memory organization, peripherals, and package information. Use the pin-description table when assigning multiplexed functions, and verify the ordering-information section to confirm that STM8S207K6T6C corresponds to the intended package and temperature grade.
Where can I find the STM8S207K6T6C pinout?
The STM8S207K6T6C pinout is shown in the manufacturer datasheet on the official STM8S207K6 product page. The device uses a 32-pin LQFP package, but its pads can support multiple peripheral functions through alternate-function configuration. Use the datasheet pin-description table for the exact 1-through-32 mapping and required I/O states during reset. The package drawing also identifies the exposed pad configuration for the selected package variant. Cross-check those assignments against the compiler pin-definition files used by the STM8 development toolchain.
What communication interfaces does STM8S207K6T6C include?
The STM8S207K6T6C includes two UARTs, SPI, I²C, and CAN. The manufacturer device description identifies each interface, while the manufacturer documentation also lists a broad timer complement and a 10-bit ADC. This combination allows the MCU to connect serial sensors, memory devices, displays, service ports, and industrial CAN networks without requiring several separate interface devices. CAN is particularly useful for higher-integrity embedded networks, while UART, SPI, and I²C cover point-to-point, higher-speed peripheral, and low-speed two-wire system connections.
Is STM8S207K6T6C suitable for CAN-based industrial control?
Yes, the STM8S207K6T6C is suitable for CAN-based industrial control because it combines a CAN interface with a 24 MHz 8-bit core and multiple timers. The manufacturer feature summary confirms CAN, two UARTs, SPI, and I²C, giving the device enough connectivity for local sensors and a fieldbus node. Its 32 KB Flash can support protocol handling and application firmware, while the timer resources support periodic task scheduling and timing functions. Firmware must still include appropriate bus timing, fault handling, termination, and diagnostic logic.
What can replace STM8S207K6T6C?
The closest same-family replacements are STM8S207K6T6, STM8S207K8T6C, STM8S207K8T6, and STM8S207K8T3 when their package, pinout, memory requirement, and temperature grade remain acceptable. These alternatives come from the STM8S207 family and use the same LQFP-32 footprint, but they are not interchangeable without checking firmware memory use and environmental requirements. No cross-manufacturer candidate could be confirmed as a true pin-to-pin drop-in replacement. A replacement should therefore be validated against the manufacturer datasheet rather than selected from generic functional similarity.
Can STM8S207K8T6C replace STM8S207K6T6C?
STM8S207K8T6C can serve as a same-family upgrade when the board footprint and firmware constraints permit. According to the manufacturer family information, the STM8S20xxx family covers program-memory configurations from 32 KB to 128 KB; the K8 variant therefore offers more Flash than the 32 KB K6 device. The additional memory does not remove the need to confirm pin multiplexing, electrical conditions, and startup behavior. Existing software should also be checked for assumptions about memory size, bootloader boundaries, and application data placement.
STM8S207K6T6C vs STM8S207K6T6 — which is better?
STM8S207K6T6C and STM8S207K6T6 belong to the same STM8S207 family and use the 32-pin LQFP footprint, so their pin-level suitability is closely related. Their principal selection point is the ordering suffix: STM8S207K6T6C includes the C temperature designation, while STM8S207K6T6 does not. For commercial-temperature equipment, the C version is generally the more explicit ordering choice; for extended-temperature requirements, the suffix without C may be appropriate. Confirm the exact temperature grade, packing option, and production configuration in the manufacturer ordering table.
When should I choose STM8S207K6T6C over a lower-memory STM8 variant?
Choose STM8S207K6T6C when a design needs the exact combination of a 32 KB program-memory device, a 24 MHz core, integrated EEPROM, and multiple serial interfaces in LQFP-32. A smaller-memory variant may be sufficient for simple control loops but can constrain protocol buffers, logging, and future feature growth. STM8S207K8T6C is preferable when additional Flash is valuable and the same package can be retained. The deciding factors should be firmware size, peripheral mix, temperature grade, qualification requirements, and the availability of a fully documented pin-compatible ordering configuration.
Is STM8S207K6T6C the same as STM8S207K8T6C?
No, STM8S207K6T6C and STM8S207K8T6C are not identical parts. Both belong to the STM8S207 performance line and are associated with the same 32-pin LQFP family, but the K8 device provides a larger Flash configuration than the 32 KB K6 device. The manufacturer family information identifies STM8S20xxx capacities ranging from 32 KB to 128 KB. The larger memory can simplify firmware growth, although a production substitution still requires checking pin multiplexing, temperature grade, timing, and any application code tied to a fixed memory layout.
What is the best STMicroelectronics equivalent for STM8S207K6T6C?
The best documented alternatives are same-family STMicroelectronics STM8S207 devices in the same LQFP-32 footprint, including STM8S207K8T6C, STM8S207K8T6, and STM8S207K8T3. Their relative advantages center on larger Flash configurations, while STM8S207K6T6 remains the closest lower-memory ordering choice. No cross-manufacturer equivalent could be confirmed as pin-to-pin compatible with the complete STM8S207 peripheral arrangement. For an unassisted production substitution, validate the candidate’s pin table, memory map, electrical characteristics, package drawings, and firmware behavior.
Where can I buy STM8S207K6T6C online?
Use the “Request a Quote” form on this page to request STM8S207K6T6C pricing, stock confirmation, lead time, and minimum order quantity. The component is identified as a 24 MHz, 32 KB-Flash STM8S microcontroller in a 32-pin LQFP tray configuration. Current commercial terms can change with inventory and manufacturing schedules, so submitting the exact MPN for a written quotation is the most reliable purchasing path. The requested suffix should remain STM8S207K6T6C to preserve the intended package and temperature-grade configuration.
What is the price of STM8S207K6T6C?
The current price of STM8S207K6T6C is provided through the “Request a Quote” form on this page. The component is a 24 MHz STM8S 8-bit microcontroller with 32 KB of Flash, integrated EEPROM, a 10-bit ADC, two UARTs, SPI, I²C, and CAN in a 32-pin LQFP package. Requesting a quotation for the complete MPN ensures that pricing is tied to the exact ordering configuration rather than a family-level or differently suffixed device. Quantity, delivery packaging, and current production availability can affect the commercial offer.
What is the lead time for STM8S207K6T6C and is it in stock?
Current stock and lead time for STM8S207K6T6C should be confirmed through the “Request a Quote” form on this page. The manufacturer lists the STM8S207K6 family, and the verified product listing identifies STM8S207K6T6C as a 32-pin LQFP device supplied in a tray configuration. Because inventory and lead time vary by quantity and order packaging, submit the exact MPN and required quantity for current scheduling information. Also specify whether production prototypes, a small build, or a larger planned build is required.
What tools are compatible with STM8S207K6T6C programming?
The STM8S207K6T6C is programmed through the STMicroelectronics STM8 development toolchain using a compatible ST-LINK programmer and SWD interface. Device configuration and firmware development are supported by the STM8CubeMX environment and the STM8Cube programmer families, subject to the installed tool versions and the device database containing STM8S207K6. The manufacturer documentation identifies the programming and debug interfaces for the STM8 family. During board bring-up, confirm SWD signal orientation, supply levels, reset state, and the boot configuration required by the application.

داتای سەرچاوەی ئەندازیاری بۆ STM8S207K6T6C — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose STM8S207K6T6C when the design specifically requires a 24 MHz STM8S controller with 32 KB of Flash, integrated EEPROM, a 10-bit ADC, two UARTs, SPI, I²C, CAN, and an LQFP-32 package. Select STM8S207K8T6C when the same family and footprint are desired but firmware growth makes 64 KB of Flash more useful. STM8S207K6T6 is the closest lower-memory same-family choice, with ordering-suffix and environmental requirements taking priority over interchangeability. The STM8S207K8T6, STM8S207K8T3, and STM8S207K6T3 alternatives may suit production or temperature configurations, but each requires confirmation of suffix meaning and pin behavior. No cross-manufacturer drop-in replacement was confirmed. Before substitution, review the manufacturer ordering table, memory map, package drawing, electrical characteristics, pin-description table, and existing firmware constraints.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە STM8S207K6T6 STM8S207K8T6C STM8S207K8T6 STM8S207K8T3 STM8S207K6T3
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package LQFP-32 LQFP-32 LQFP-32 LQFP-32 LQFP-32 LQFP-32
Maximum CPU Frequency 24 MHz 24 MHz 24 MHz 24 MHz 24 MHz 24 MHz
Flash Program Memory 32 KB 32 KB 64 KB 64 KB 64 KB 32 KB
Integrated EEPROM Present Present Present Present Present Present

جیاکەرەوە سەرەکییەکان

  • Provides the exact 32 KB memory configuration in the STM8S207 performance line (بەراورد بەSTM8S207K8T6C)
  • Combines six communication and conversion resources with a compact 8-bit core (بەراورد بەSTM8S207K8T3)
  • Uses a common LQFP-32 footprint for same-family PCB reuse (بەراورد بەSTM8S207K6T6)

تێبینییەکانی دیزاین

Decouple each supply pin with local high-frequency ceramic capacitance and provide the bulk capacitance required by the manufacturer power-supply recommendations. Keep the analog supply return path close to VDDA and VSSA, and avoid routing digital return currents beneath sensitive analog inputs. The 3.3 V or 5 V capability does not remove the need to check pin-specific analog operating conditions and startup sequencing in the manufacturer electrical-characteristics tables.

Reserve SWD programming signals, reset, clock, and ground connections even when the production board does not use a permanent programmer header. Use a small exposed test-pad pattern or footprint so programming can be performed without adding connectors to the enclosure. Confirm the reset circuit and oscillator components against the manufacturer reference setup, and keep high-current or switching-regulator nodes away from the ADC and communication traces.

Do not treat any STM8S207 K6 or K8 variant as interchangeable merely because the package drawing matches. Confirm memory capacity, temperature suffix, alternate-function mapping, reset behavior, and firmware memory boundaries in the manufacturer ordering information and pin description. K8 alternatives provide 64 KB Flash rather than the target device’s 32 KB, which can affect linker layouts, bootloaders, calibration regions, and files stored in internal Flash.

Terminate CAN and other long communication traces according to the selected bus topology and transceiver requirements, and keep the controller-side trace separated from analog and clock signals. SPI traces should have controlled length relationships when connected to a high-speed peripheral, while I²C routing should minimize capacitance and follow the pull-up arrangement specified for the bus voltage. Maintain continuous ground reference beneath signals and avoid stubs in sensitive analog branches.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified in the cited product information. AEC-Q100 is not applicable to this general-purpose microcontroller ordering configuration.

داتا پشتڕاستکراوەتەوە لە: 2026-11-10 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

STM8S207K6T6C datasheet STM8S207K6T6C pinout STM8S207K6T6C datasheet pdf STM8S207K6T6C equivalent STM8S207K6T6C replacement STM8S207K6T6C price STM8S207K6T6C stock STMicroelectronics STM8S207K6T6C STM8S207K6T6C LQFP-32 pinout STM8S207K6T6C CAN application STM8S207K6T6C vs STM8S207K8T6C STM8S207K6T6C programming tool STM8S207K6 24MHz 32KB STM8S207K6T6C schematic

پێکهاتە و زاراوە پەیوەندیدارەکان

STMicroelectronics STM8S207K6T6C STM8S207K6 STM8S207K8T6C STM8S207K8T6 STM8S207K8T3 STM8S207K6T6 STM8S207K6T3 STM8S STM8S20xxx 8-bit microcontroller microcontroller embedded controller semiconductor advanced STM8 core Harvard architecture three-stage pipeline 10-bit ADC UART SPI I²C CAN integrated EEPROM 32 KB Flash LQFP-32 surface-mount package 3.3 V 5 V 24 MHz SWD ST-LINK
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ