Texas Instruments

TMS320C51PQ100 - 100MHz 16-Bit DSP | Texas Instruments

MPN: TMS320C51PQ100 ✓ چالاک
132-pin BQFP Package 100 MHz Speed
MOQ: 1 |

TMS320C51PQ100 گشتی

Texas Instruments TMS320C51PQ100 is a 16-bit fixed-point digital signal processor rated at 100 MHz and 50 MIPS, with floating-point support and a 132-pin BQFP package. The processor provides single-cycle 16-bit multiply-accumulate execution, making it suitable for embedded signal-processing workloads that require deterministic arithmetic and dedicated digital filtering.

A digital signal processor is a specialized semiconductor that executes mathematical operations on streams of sampled data. Its architecture is optimized for filtering, convolution, Fourier analysis, waveform generation, and control loops. Within the broader hierarchy of signal-processing semiconductors, a DSP sits below general-purpose microprocessors and microcontrollers because it combines a high-throughput arithmetic unit with memory and peripherals designed for real-time numerical processing.

The TMS320C51PQ100 combines a 16-bit architecture with 100 MHz operation and 50 MIPS throughput. Its instruction execution times are 25, 35, and 50 ns for 5 V operation and 25, 40, and 50 ns for 3 V operation. The fixed-point computational core supports efficient implementation of digital filters and other real-time transforms, while the listed floating-point capability broadens the range of numerical workflows that can be handled.

The 132-pin BQFP package exposes the processor's external memory, interface, control, and power connections. A legacy quad flat package requires careful escape routing and adequate thermal design at higher clock rates. Board-level implementation should follow the manufacturer's pin-description and recommended layout guidance rather than relying on generic BQFP conventions.

Typical applications include industrial motor-control systems, digital audio and communications equipment, speech-processing systems, instrumentation, and embedded control platforms. In these systems, the processor can implement finite-impulse-response filters, recursive filters, correlation functions, signal transforms, and real-time control algorithms with deterministic instruction timing.

Designers should account for external program and data memory requirements, clock generation, reset behavior, voltage selection, decoupling, and peripheral connectivity. The processor's 100 MHz rating does not eliminate the need for careful signal-integrity and thermal analysis on a high-speed mixed-signal board.

This product page combines the verified TMS320C51PQ100 identity, package and performance information with application guidance, practical design considerations, replacement analysis, and a parameter-oriented comparison designed to help engineers evaluate legacy DSP designs and sourcing options.

جێگرەوەکانی جێگۆڕکێ بۆ TMS320C51PQ100 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ TMS320C51PQ100 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Clock Frequency, Instruction Execution Time at 3 V, Instruction Execution Time at 5 V.

Texas Instruments
Clock Frequency: 80 MHz
Instruction Execution Time at 3 V: 25 ns, 40 ns, and 50 ns single-cycle options
Instruction Execution Time at 5 V: 25 ns, 35 ns, and 50 ns single-cycle options
بەراوردکردن لەگەڵ TMS320C51PQ100 →

TMS320C51PQ80

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Texas Instruments
📦 132-pin BQFP
تایبەتمەندییەکانی گونجاو

پەیوەندی بۆ نرخ

بینینی داتاشیت →

TMS320C51PQ64

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 132-pin BQFP
Clock frequency is 64 MHz versus 100 MHz, a 36% reduction; this is the minimum family-level candidate and requires a careful real-time timing review.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

TMS320C51PQ100 تایبەتمەندییەکان

Product Type 16-bit fixed-point and floating-point digital signal processor
Clock Frequency 100 MHz
Instruction Throughput 50 MIPS
Word Length 16 bit
Arithmetic Type Fixed-point with floating-point capability
Instruction Execution Time at 5 V 25 ns, 35 ns, or 50 ns
Instruction Execution Time at 3 V 25 ns, 40 ns, or 50 ns
Multiplier and Accumulator Single-cycle 16-bit multiply/accumulate operation
پاکێج 132-pin BQFP
جۆری دامەزراندن Surface mount
پۆل Digital Signal Processor (DSP)
Manufacturer Texas Instruments

ڕێنمایی ڕێکخستنی پینی TMS320C51PQ100 132-pin bqfp

ڕێکخستنی پین بۆ TMS320C51PQ100 (پاکێجی 132-pin bqfp). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 132-pin bqfp بۆ TMS320C51PQ100

هیچ داتای وردی پینئاوت بەردەست نییە بۆ TMS320C51PQ100.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

TMS320C51PQ100 گونجاوە بۆ 6 بەکارھێنانs: Digital Motor Control, Digital Audio Processing, Communications Signal Conditioning, Industrial Measurement and Instrumentation, Voice and Speech Processing, Industrial Control and Automation.

🏭

Digital Motor Control

The TMS320C51PQ100 fits digital motor-control loops that require deterministic 16-bit arithmetic at up to 50 MIPS. Its single-cycle multiply/accumulate operation supports current-loop, speed-loop, and transform calculations without the overhead of general-purpose control code. The 100 MHz clock provides more scheduling headroom than the 80 MHz TMS320C51PQ80 alternative, which is important when several control paths or diagnostic functions share the DSP. Deployment requires external memory for the selected system, isolated analog front-end circuitry, protected drive outputs, and firmware timing analysis that accounts for interrupt latency and worst-case control computation.

🎧

Digital Audio Processing

The TMS320C51PQ100 can implement real-time audio filters, equalization, mixing, and signal analysis using its 16-bit fixed-point arithmetic and 50 MIPS throughput. The 100 MHz clock is useful when multiple channels or computationally intensive filter sections must complete within each sample interval. Its floating-point capability can also assist algorithms that benefit from higher dynamic range, although fixed-point scaling determines practical implementation efficiency. A production design should include appropriate clocking, audio-interface isolation, and memory expansion. Before choosing the 80 MHz family alternative, calculate worst-case processing time for the highest channel count and shortest buffer period.

🌐

Communications Signal Conditioning

The TMS320C51PQ100 is suitable for communications front-end processing that includes digital filtering, modulation, correlation, or adaptive signal conditioning. Its dedicated DSP architecture executes 16-bit multiply/accumulate operations in a single cycle, while the 100 MHz clock provides 50 MIPS for time-division processing. Designers should choose line rates and buffering so the worst-case algorithm completes before the next data block is required. External interface logic, clock recovery, impedance-controlled routing, and memory organization are critical to preserving signal integrity. The lower-speed alternatives can support reduced-channel or reduced-bandwidth designs, but they do not offer the same processing margin.

🖥️

Industrial Measurement and Instrumentation

The TMS320C51PQ100 can process sampled sensor data for industrial measurement systems that require deterministic filtering, calibration, and real-time analysis. Its 16-bit arithmetic supports classic control and signal-processing algorithms, and the 50 MIPS throughput allows multiple measurement channels to share a processor when the schedule is properly partitioned. The design must separate analog acquisition circuitry from high-speed digital signals and use the manufacturer’s pin and decoupling guidance. For a slower instrument with modest sample rates, the 80 MHz family option may reduce processing margin. Confirm the required external data-memory depth, peripheral configuration, and operating temperature range before finalizing the processor selection.

🎤

Voice and Speech Processing

The TMS320C51PQ100 can execute speech-analysis functions such as pre-emphasis, filtering, energy detection, spectral analysis, and feature extraction in an embedded system. Its deterministic 16-bit multiply/accumulate operation is valuable for repetitive sample-by-sample work, and the 100 MHz clock permits more features or channels than a lower-speed family member. Practical voice products also need microphone conditioning, an audio data interface, sufficient program and data memory, and deterministic interrupt scheduling. A speech codec or interface companion can simplify front-end integration. Validate the complete algorithm against the shortest supported sampling interval, including buffering and control overhead, rather than relying only on the advertised MIPS figure.

🏭

Industrial Control and Automation

The TMS320C51PQ100 is appropriate for legacy industrial controllers that combine deterministic control loops with signal filtering or communications. Its 50 MIPS execution rate and 16-bit arithmetic can handle proportional-integral control, state estimation, filtering, and protocol processing in one processor. The 132-pin BQFP package exposes extensive processor and peripheral connectivity, but it also requires disciplined board routing and thermal verification. Systems requiring the maximum processing reserve should retain the 100 MHz device rather than the 80 MHz alternative. Before production, validate restart behavior, brownout recovery, watchdog strategy, memory wait states, and I/O timing against the complete manufacturer documentation.

What are the key specifications of TMS320C51PQ100 that engineers should know?
The TMS320C51PQ100 combines a 100 MHz clock, 50 MIPS throughput, a 16-bit word length, fixed-point and floating-point arithmetic, and a 132-pin BQFP package. The listed execution times are 25, 35, and 50 ns at 5 V and 25, 40, and 50 ns at 3 V. According to the Texas Instruments TMS320C51 datasheet, its single-cycle 16-bit multiply/accumulate architecture targets deterministic real-time signal processing.
What is the TMS320C51PQ100 used for?
The TMS320C51PQ100 is used for real-time digital signal processing, including filtering, waveform generation, spectral analysis, communications signal conditioning, and industrial control. Its 16-bit fixed-point architecture executes a 16-bit multiply-accumulate operation in one cycle, while the 100 MHz clock supports 50 MIPS. The Texas Instruments TMS320C51 datasheet identifies the device as a digital signal processor for embedded numerical applications.
Is TMS320C51PQ100 the same as TMS320C51PQ?
The TMS320C51PQ100 is the 100 MHz-qualified member of the TMS320C51 family, while the speed marking on TMS320C51PQ must be confirmed from its complete ordering information before substitution. Both use the same 132-pin BQFP family package, but clock speed, temperature grade, and supply details must match the original equipment requirements. Use the manufacturer ordering table and datasheet to verify every parameter before treating either part as a replacement.
What can replace TMS320C51PQ100?
The closest defensible replacement is another TMS320C51 family device in the 132-pin PQ package whose clock rate, memory organization, peripherals, voltage range, and temperature grade match the original design. TMS320C51PQ80 is a same-family option when its lower 80 MHz clock rate still satisfies the timing budget. Do not select a replacement solely by package name; confirm pin functions and software timing because instruction-cycle changes can alter real-time behavior.
What is the best Texas Instruments equivalent for TMS320C51PQ100?
The best Texas Instruments equivalent depends on whether the original PCB requires exactly 100 MHz operation. TMS320C51PQ80 can serve as a lower-speed alternative in the same 132-pin BQFP family when 20% less clock capacity is acceptable, while TMS320C51PQ64 requires a more detailed timing review. The manufacturer TMS320C51 datasheet and ordering information are the controlling references for package, speed, temperature, and supply compatibility.
TMS320C51PQ100 vs TMS320C51PQ80 - which is better for real-time filtering?
TMS320C51PQ100 is preferable when filtering deadlines require the full 100 MHz clock and 50 MIPS throughput. TMS320C51PQ80 operates at 80 MHz and offers 20% less clock capacity, so it may be adequate for control loops with margin but can reduce the number of filter operations completed within a fixed sample period. Base the decision on the required sampling rate, block-processing time, and worst-case interrupt latency rather than MIPS alone.
When should I choose TMS320C51PQ100 over a lower-speed TMS320C51 variant?
Choose TMS320C51PQ100 when the DSP must execute fixed-rate filtering, control, or communications algorithms with sufficient timing margin at 100 MHz. A lower-speed family member can reduce clock headroom and may require fewer operations per sampling interval, fewer parallel channels, or a revised schedule. TMS320C51PQ100 is therefore the safer functional choice when real-time workload utilization is already high or firmware timing has not been fully characterized.
Is TMS320C51PQ100 suitable for motor control and industrial signal processing?
The TMS320C51PQ100 is suitable for motor control and industrial signal processing when the system includes appropriate external memory, analog front ends, isolation, and protection. Its deterministic 16-bit arithmetic and 50 MIPS throughput support sampled control loops and digital filtering, while the 132-pin BQFP exposes dedicated processor and peripheral signals. The design must also account for package thermal performance and protection between industrial analog circuitry and the digital processor.
Where can I download the TMS320C51PQ100 datasheet PDF?
The manufacturer datasheet is available through the Texas Instruments TMS320C51 documentation at the datasheet URL on this page. It contains the processor architecture, pin descriptions, timing information, electrical characteristics, package details, and ordering information needed to evaluate the exact PQ100 variant. For a controlled new design, use the manufacturer copy rather than an unofficial mirror and confirm the device identifier and revision against the parts being serviced.
Where can I find the TMS320C51PQ100 pinout?
The TMS320C51PQ100 pinout is defined in the pin-description section and package drawing of the manufacturer TMS320C51 datasheet. The component uses a 132-pin BQFP package. For PCB work, assign every signal from the datasheet pin table rather than inferring BQFP functions from package dimensions. Pay particular attention to clock, reset, program-memory interface, data-memory interface, interrupt, serial-port, and power pins.
How should I design the power and decoupling for TMS320C51PQ100?
Design the supply network around the manufacturer’s recommended operating voltage and pin requirements, placing high-frequency decoupling capacitors close to the relevant power and ground pins. The TMS320C51PQ100 can operate in systems described at both 3 V and 5 V, but the exact allowed input range and tolerance must be confirmed in the datasheet. Use separate return paths and controlled clock routing to limit supply noise and digital coupling into sensitive analog sections.
Does TMS320C51PQ100 require an external memory device?
The memory configuration of TMS320C51PQ100 depends on the system design and the on-chip resources documented for the device, so external memory may be required for program storage or working data. The manufacturer datasheet should be checked for the exact memory map, addressable range, and external memory interface requirements. Do not infer capacity from the 16-bit word length; those are separate architectural and system-level parameters.
What is the lead time for TMS320C51PQ100?
The current manufacturer lead time for TMS320C51PQ100 is not stated on this page. Request the latest lead time, minimum order quantity, and available shipping configuration through the Request a Quote form on this page. Because legacy DSP availability can vary by quantity and sourcing channel, confirm the exact suffix, package, temperature grade, and shipping condition before committing a production schedule.
Is TMS320C51PQ100 in stock?
Current stock for TMS320C51PQ100 should be confirmed through the Request a Quote form on this page. The form allows procurement to specify the exact 132-pin BQFP orderable configuration and required quantity. Do not equate a listing that mentions immediate dispatch with guaranteed inventory for every grade and packaging quantity, especially when maintaining or reproducing a legacy embedded system.
Where can I buy TMS320C51PQ100 online?
Use the Request a Quote form on this page to request TMS320C51PQ100 availability and current commercial terms for the required quantity. State the exact MPN, package, temperature grade, and whether reel, tray, or another shipping configuration is acceptable. This avoids selecting a superficially similar but electrically or mechanically different legacy DSP configuration.
What is the price of TMS320C51PQ100?
Current pricing for TMS320C51PQ100 depends on quantity, sourcing condition, and the exact orderable suffix. Submit the required quantity and packaging preference through the Request a Quote form on this page for a current quotation. Because the TMS320C51 is a mature DSP family, production and inventory planning should focus on matching the exact 132-pin BQFP configuration rather than relying on a generic family-level price.
Are TMS320C51PQ100 and TMS320C51PQ80 pin-to-pin compatible?
TMS320C51PQ80 belongs to the same 132-pin PQ package family and is a practical same-family candidate for designs that can tolerate reduced clock capacity. Compatibility still requires verification of supply voltage, peripheral enablement, timing, and device identifiers. According to the Texas Instruments TMS320C51 family documentation, CPU instruction timing changes with clock frequency, so real-time firmware should be reviewed before substitution.

داتای سەرچاوەی ئەندازیاری بۆ TMS320C51PQ100 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose TMS320C51PQ100 when maintaining the original 100 MHz timing budget, supporting multiple real-time channels, or retaining the largest processing margin in a TMS320C51-based design. Choose TMS320C51PQ80 only when the DSP workload remains comfortably within 40 MIPS and the 20% clock reduction is acceptable; this can be attractive when the board is otherwise unchanged and the lower-speed grade is commercially preferable. TMS320C51PQ64 is a more restricted option because its 36% lower clock rate may affect interrupt latency, filter block execution, and communication timing. For all three devices, verify the 132-pin package, supply requirements, temperature grade, memory organization, peripheral configuration, and complete ordering suffix. A package-compatible processor is not automatically a drop-in replacement if the original firmware assumes a specific cycle count or peripheral state.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە TMS320C51PQ80 TMS320C51PQ64
Brand Texas Instruments Texas Instruments Texas Instruments
Package 132-pin BQFP 132-pin BQFP 132-pin BQFP
Clock Frequency 100 MHz 80 MHz 64 MHz
Instruction Throughput 50 MIPS 40 MIPS 32 MIPS
Word Length 16 bit 16 bit 16 bit
Arithmetic Capability Fixed-point with floating-point capability Fixed-point with floating-point capability Fixed-point with floating-point capability
Processor Category Digital Signal Processor (DSP) Digital Signal Processor (DSP) Digital Signal Processor (DSP)

جیاکەرەوە سەرەکییەکان

  • Higher real-time processing reserve (بەراورد بەTMS320C51PQ80)
  • Maximum same-family throughput (بەراورد بەTMS320C51PQ64)
  • Same package architecture with retained family ecosystem (بەراورد بەTMS320C51PQ80)

تێبینییەکانی دیزاین

Treat the 132-pin BQFP as a temperature-sensitive component even though the processor is a digital IC. Estimated: at a 5 V core and 100 MHz operation, dissipated power depends on the actual activity factor, I/O loading, supply voltage, and ambient temperature; these values are not stated in the product records. Derive the board-level junction estimate from the manufacturer power data and the PCB thermal resistance, then verify with a thermocouple near the package during worst-case processing.

Route the clock, program-bus, data-bus, and high-fanout memory signals according to the manufacturer layout recommendations rather than generic BQFP escape-routing rules. Keep the clock path short, provide a clean return path, and place decoupling capacitance at the associated power pins. The exact memory topology and wait-state requirements are not listed in the product records, so use the pin-description and interface guidance in the manufacturer datasheet when defining the layout.

Separate analog input, audio, motor-current, and communication interfaces from the DSP clock and memory buses. Use continuous ground planes, avoid routing high-current switching paths beneath sensitive inputs, and control clock-edge geometry. Estimated: maximum clock-edge rise or fall time cannot be calculated without the load capacitance and PCB geometry; use the manufacturer’s interface timing limits and validate the final board with an active probe.

Do not substitute a lower-speed family member without reviewing real-time firmware. The 80 MHz option reduces clock capacity by 20% relative to 100 MHz, and the 64 MHz option reduces it by 36%. Check interrupt latency, filter block time, memory wait states, peripheral timing, and boot behavior. Also verify the complete ordering suffix because speed grade, temperature grade, package, and supply requirements can be separate selection criteria.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements were identified for this exact MPN. AEC-Q100 is not applicable because TMS320C51PQ100 is not an automotive-qualified variant in the identified ordering information.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

TMS320C51PQ100 datasheet TMS320C51PQ100 specifications TMS320C51PQ100 pinout TMS320C51PQ100 datasheet pdf TMS320C51PQ100 equivalent TMS320C51PQ100 replacement TMS320C51PQ100 cross reference TMS320C51PQ100 vs TMS320C51PQ80 TMS320C51PQ100 132 pin BQFP TMS320C51PQ100 application circuit Texas Instruments TMS320C51PQ100 TMS320C51PQ100 price TMS320C51PQ100 stock TMS320C51PQ100 50 MIPS DSP

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments TMS320C51PQ100 TMS320C51PQ80 TMS320C51PQ64 digital signal processor DSP fixed-point arithmetic floating-point arithmetic 16-bit word length 50 MIPS 100 MHz single-cycle multiply/accumulate digital filtering motor control digital audio processing speech processing industrial instrumentation communications signal conditioning 132-pin BQFP quad flat package surface-mount package external memory interface real-time signal processing semiconductor
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ