USB2228-NU-05-E2 - USB 2.0 Flash Media Controller | SMSC
MPN: USB2228-NU-05-E2 ✗ کۆتایی ژیانUSB2228-NU-05-E2 گشتی
A flash media controller is an interface IC that bridges a USB host and one or more flash-card standards. It belongs to the controller and interface-controller hierarchy within integrated circuits, while the integrated card power FETs help manage the electrical load presented by supported media. The USB2228 is intended for portable-device, reader, and embedded systems requiring compatibility with several legacy flash-card formats.
The fourth-generation architecture combines USB device connectivity, flash-media interface logic, and card power control in one package. Its 128-VTQFP construction provides numerous external connections for card data lines, control signals, media detection, and power management. Because the controller coordinates multiple card formats, PCB layout should keep sensitive USB and media signal paths short and route switching or power-transient paths away from data inputs.
Typical uses include USB flash-card readers, multifunction peripherals, portable media appliances, digital still-camera accessories, and embedded systems that must read legacy xD, SmartMedia, or Memory Stick media. Systems operating from a USB bus must account for the controller's bus-powered operating limits and the combined current required by the supported card interface.
Design work should begin with the USB2228/USB2227 manufacturer datasheet, particularly its pin-description table, supported operating modes, clock requirements, and reference application circuit. Validate connector, media-detection, card-power, and firmware compatibility for the exact card population used in the product rather than relying only on the family description.
This product page combines the verified USB 2.0 interface, flash-media controller, integrated card power FET, and 128-VTQFP package information with application guidance, package comparisons, and qualified same-footprint alternatives. It also distinguishes directly documented device characteristics from parameters that require confirmation before schematic release.
جێگرەوەکانی جێگۆڕکێ بۆ USB2228-NU-05-E2 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ USB2228-NU-05-E2 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Integrated Card Power FETs, On-Chip Firmware, Host Interface, Media Interface, Package Type.
USB2228-NU-05
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →USB2228-NU-11
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →USB2228-NU-05-E2 تایبەتمەندییەکان
| Product Type | USB 2.0 Flash Media Controller |
| Device Generation | Fourth generation |
| USB Interface | USB 2.0 parallel interface |
| Host-to-Media Role | Interface between a USB host controller and flash media cards |
| Integrated Card Power FETs | Present |
| Supported Media | SmartMedia, xD Picture Card, Memory Stick, High Speed Memory Stick, and Memory Stick PRO |
| Package Type | 128-pin VTQFP |
| Package Dimensions | 14 mm x 14 mm |
| جۆری دامەزراندن | Surface mount |
| ژمارەی پینەکان | 128 pins |
| On-Chip Firmware | Reads and writes High Speed Memory Stick and Memory Stick PRO |
| دۆخی RoHS | unknown |
| REACH Status | unknown |
| Lead-Free Status | unknown |
ڕێنمایی ڕێکخستنی پینی USB2228-NU-05-E2 14 mm x 14 mm
ڕێکخستنی پین بۆ USB2228-NU-05-E2 (پاکێجی 14 mm x 14 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ USB2228-NU-05-E2.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
USB2228-NU-05-E2 گونجاوە بۆ 6 بەکارھێنانs: Multi-Format USB Flash Card Reader, Portable Media Reader, Multifunction Peripheral Card Access, Digital Camera Legacy Media Transfer, Embedded Flash Media Appliance, USB-to-Legacy-Card Adapter.
Multi-Format USB Flash Card Reader
The USB2228-NU-05-E2 fits a multi-format reader because it provides a USB 2.0 parallel interface to a host controller while supporting SmartMedia, xD Picture Card, Memory Stick, High Speed Memory Stick, and Memory Stick PRO formats. Its integrated card power FETs reduce the number of separate power-path functions needed around supported media. The manufacturer datasheet identifies on-chip firmware for High Speed Memory Stick and Memory Stick PRO access. Before layout release, confirm the supported connector arrangement, media-detection signals, operating-mode restrictions, and reference schematic for the exact card population. Firmware should also verify media identification and fault handling rather than assuming every physical card implements all optional signaling identically.
پێشنیارکراو
Portable Media Reader
The USB2228-NU-05-E2 is suitable for a compact portable reader designed around legacy removable flash formats. Its 128-pin VTQFP package provides dedicated connections for USB, flash-media control, and card power management, while integrated card power FETs support the media interface. A portable implementation must still budget carefully for USB bus-power demand, connector protection, card insertion transients, and the thermal environment inside a small enclosure. Follow the USB2228/USB2227 manufacturer reference circuit for component placement and power distribution. Validate read and write operation with representative SmartMedia, xD, Memory Stick, and Memory Stick PRO media because physical format support alone does not guarantee identical firmware behavior for every card revision.
پێشنیارکراو
Multifunction Peripheral Card Access
The controller can serve as the flash-media access block in a multifunction peripheral that combines USB connectivity with removable-media capability. Its fourth-generation architecture provides a parallel USB 2.0 interface to the host controller and manages several legacy flash-card formats through one integrated device. The 128-VTQFP package requires careful planning because numerous media and control signals must be routed within a constrained board area. Use short, controlled media-signal paths, provide solid return paths beneath data routes, and keep card power switching away from sensitive inputs. The manufacturer datasheet should be the authority for clocking, pin multiplexing, card insertion behavior, and supported modes before the peripheral architecture is frozen.
پێشنیارکراو
Digital Camera Legacy Media Transfer
The USB2228-NU-05-E2 can support transfer from legacy flash media used with digital cameras and imaging accessories. Its support for xD Picture Card, Memory Stick, SmartMedia, High Speed Memory Stick, and Memory Stick PRO allows one controller platform to address multiple historical card ecosystems. For camera accessories, the design must handle media insertion while the USB link is active, protect card contacts from electrostatic discharge, and maintain deterministic card-power sequencing. The manufacturer datasheet identifies on-chip firmware for High Speed Memory Stick and Memory Stick PRO, which should be tested with the intended media generations. Validate image-transfer throughput, card detection timing, and cable-disconnect behavior with the final host software and accessory enclosure.
پێشنیارکراو
Embedded Flash Media Appliance
The USB2228-NU-05-E2 can bridge an embedded USB host to removable flash media in kiosks, industrial service tools, and legacy data-transfer appliances. A single interface controller reduces the need to implement separate host-side drivers for every supported flash format, while its parallel interface provides a direct path to a suitable USB host controller. The design must define safe media-removal behavior, maximum supported card capacity, and recovery after unexpected power loss. Because this legacy controller family supports particular media standards, system software should present explicit format and capacity information rather than implying universal flash-card compatibility. Use the manufacturer reference design to establish connector, clock, supply, and decoupling requirements, then validate repeated insertion and removal across the full intended card population.
پێشنیارکراو
USB-to-Legacy-Card Adapter
The USB2228-NU-05-E2 is appropriate for an adapter that exposes SmartMedia, xD Picture Card, or Memory Stick media through a USB 2.0 host connection. Its integrated card power FETs support the card interface, and the same silicon family can address several media standards without a separate controller for each format. Adapter-board design should prioritize ESD protection at externally accessible card sockets, controlled card-power distribution, and unambiguous media-detection wiring. Check connector pinouts against the exact supported card standard rather than treating all legacy flash connectors as interchangeable. The manufacturer datasheet and reference circuitry should also be used to verify host-side timing and supported operating modes before advertising the adapter as a universal legacy-media reader.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ USB2228-NU-05-E2 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | USB2228-NU-05 | USB2228-NU-11 |
|---|---|---|---|
| Brand | SMSC Corporation | Microchip Technology | Microchip Technology |
| Package | 128-VTQFP (14x14) | 128-VTQFP (14x14) - same | 128-VTQFP (14x14) - same |
| Device Type | USB 2.0 Flash Media Controller | USB 2.0 Flash Media Controller | USB Flash Media Controller |
| Pin Count | 128 pins | 128 pins | 128 pins |
جیاکەرەوە سەرەکییەکان
- Exact E2 ordering designation for controlled USB2228 procurement (بەراورد بەUSB2228-NU-05)
- Same-footprint base-family option for substitution review (بەراورد بەUSB2228-NU-05)
- Package-matched family variant with no package conversion (بەراورد بەUSB2228-NU-11)
تێبینییەکانی دیزاین
Build the PCB footprint from the 128-pin VTQFP land pattern in the USB2228/USB2227 manufacturer documentation rather than scaling it from a generic 128-pin package. Confirm pad length, exposed thermal-pad treatment, pin-one orientation, and courtyard clearance against the chosen assembly method. Preserve access to all fine-pitch pins during inspection and rework, and maintain a continuous ground reference beneath the device where the recommended layout permits.
Follow the manufacturer reference circuit for supply selection, decoupling, card-power routing, and power-gating behavior. Place required input and output decoupling capacitors at the associated pins with the shortest practical return paths. Separate media-power paths from sensitive USB and card-signal routing to reduce insertion and switching transients. Verify the final design against the card current, voltage tolerance, startup sequence, and USB bus-power requirements specified in the datasheet.
Do not treat support for multiple legacy flash formats as permission to use arbitrary flash media. Confirm supported card modes, capacity limits, insertion detection, and firmware behavior for each physical connector used. USB2227-NU-05 is a related controller in the Site MPN list, but its media-support differences mean it should not be substituted without a complete pin, firmware, and functional comparison; it is therefore not listed as a drop-in alternative.
Keep USB and flash-media traces short, route them over continuous reference planes, and avoid switching-node crossings on card-data lines. Match clock routing to the USB2228/USB2227 reference design, paying particular attention to return paths, via stubs, and the relationship between media-power switching and sensitive inputs. Validate signal integrity at the intended data rate with realistic card, cable, connector, and host-controller models rather than relying on a nominal schematic connection.
زانیاری پابەندبوون
The available product and manufacturer information does not explicitly state the target's RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. The E2 suffix is not interpreted as a compliance claim.