USB2244-AEZG-05 - USB 2.0 Flash Card Controller | Microchip
MPN: USB2244-AEZG-05 ✓ چالاکUSB2244-AEZG-05 گشتی
A USB flash media card controller is an integrated semiconductor that manages communication between a USB host and removable or embedded flash storage. In the product hierarchy, this controller combines USB connectivity, flash media translation, data buffering, and host-facing control functions. The USB2244 is positioned as a Hi-Speed USB 2.0 controller for SD, MMC, and Memory Stick flash media formats.
The controller is designed for embedded systems that need to expose flash media through a standard USB 2.0 connection. Microchip describes the USB2244 as an ultra-fast interface between a USB host controller and flash media cards. Its USB224x family supports average sustained transfer rates exceeding 35 MB/s when both the media and host can sustain the required transfer rate, making the controller relevant to media readers, portable storage, and data-acquisition equipment.
The USB2244 and USB2244/44i families include provisions for reading and writing secure media formats. This capability makes controller-level media-format support relevant to storage appliances, embedded readers, and systems that must present conventional flash-card media through USB to a host computer. Actual transfer performance depends on the selected card, host controller, device driver, and signal-integrity implementation.
The USB2244-AEZG-05 uses a 36-QFN package to integrate the controller within compact embedded hardware. Its specified 3 V to 3.6 V operating range is compatible with conventional low-voltage digital systems. Because the QFN package has no large exposed leads, PCB layout must follow the manufacturer land-pattern and pin-assignment guidance rather than a generic connector footprint.
For a new design, confirm the exact package drawing, pin names, signal levels, clock requirements, external component recommendations, and supported media formats against the Microchip USB224x data sheet. Validate the complete USB electrical path and card-detection behavior with the intended host, operating system, card supplier, and mechanical enclosure before production release.
جێگرەوەکانی جێگۆڕکێ بۆ USB2244-AEZG-05 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ USB2244-AEZG-05 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Supported Media, Package Type, Product Type, USB Speed, Configuration Interface.
USB2244-AEZG-06
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →USB2241I-AEZG-05
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
USB2240I-AEZG-XX
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
USB2244-AEZG-05 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Controller Type | USB 2.0 Flash Media Card Controller |
| USB Interface | USB 2.0 Hi-Speed |
| Host Interface | I2C |
| Supply Voltage Range | 3 V to 3.6 V |
| ئێستای دابینکردن | 135 mA |
| Maximum Sustained Transfer Rate | Greater than 35 MB/s when media and host support the rate |
| Package Type | 36-QFN |
| Package Dimensions | 6 x 6 mm |
| Number of Terminals | 36 |
| Supported Media | SD, MMC, and Memory Stick flash media |
| Secure Media Support | Read and write provisions for secure media formats |
| Process Technology | CMOS |
| Temperature Grade | Commercial |
| جۆری دامەزراندن | Surface Mount |
ڕێنمایی ڕێکخستنی پینی USB2244-AEZG-05 6 x 6 mm
ڕێکخستنی پین بۆ USB2244-AEZG-05 (پاکێجی 6 x 6 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ USB2244-AEZG-05.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
USB2244-AEZG-05 گونجاوە بۆ 6 بەکارھێنانs: Embedded USB Flash Media Reader, Portable Data Storage, Industrial Data Acquisition, Secure Media Handling, USB Media Dock, Network Appliance Local Storage.
Embedded USB Flash Media Reader
The USB2244-AEZG-05 fits an embedded reader that must expose SD, MMC, or Memory Stick media to a conventional USB 2.0 host. Its I2C interface lets an embedded processor configure and monitor the controller, while the 3 V to 3.6 V operating range supports low-voltage digital systems. The USB224x family can exceed 35 MB/s when both the card and host support that rate, but designers should budget for card insertion detection, connector mechanics, ESD protection, and driver compatibility before treating performance as guaranteed.
پێشنیارکراو
Portable Data Storage
A portable storage product can use the USB2244-AEZG-05 to connect removable flash media through USB 2.0 while an embedded controller manages card translation and status. The 36-QFN, 6 x 6 mm package helps preserve board area in compact products, and the device's support for SD, MMC, and Memory Stick provides media-format flexibility. Practical implementation still requires a mechanically secure card path, reliable connectors, ESD strategy, and validation with the exact cards and host systems expected by end users.
پێشنیارکراو
Industrial Data Acquisition
The USB2244-AEZG-05 can serve as the storage interface in industrial data-acquisition equipment that receives files through USB media. USB 2.0 compatibility allows connection to common host systems, while the controller manages access to SD, MMC, or Memory Stick media. The USB224x data sheet notes sustained rates exceeding 35 MB/s under favorable media and host conditions, making media selection and bus architecture important. For industrial deployment, validate card endurance, unexpected removal behavior, thermal exposure, and recovery after power interruption.
پێشنیارکراو
Secure Media Handling
The USB2244-AEZG-05 is relevant to equipment that reads or writes secure media formats because the USB2244 and USB2244/44i family includes provisions for those operations. This makes the controller relevant to specialized access, logging, and portable-security workflows where ordinary USB mass-storage controllers may not provide the required media handling. The implementation should use approved media, isolate the workflow from untrusted hosts, and verify authentication behavior against the manufacturer requirements for the selected card format.
پێشنیارکراو
USB Media Dock
A USB media dock can combine the USB2244-AEZG-05 with a card connector and embedded host processor to create a compact removable-media interface. The controller's I2C host interface supports configuration from an embedded processor, and its USB 2.0 path presents the card to an external computer. The 3 V to 3.6 V supply requirement simplifies integration with conventional embedded logic, while the 36-QFN package supports compact layouts. Mechanical retention, signal integrity, card detection, and operating-system compatibility remain essential system-level checks.
پێشنیارکراو
Network Appliance Local Storage
The USB2244-AEZG-05 can support local removable-media operations in a network appliance or service terminal that uses USB-connected flash media for configuration, logging, or transfer. USB 2.0 provides broad host-controller availability, while support for several card families gives system designers deployment flexibility. The controller should be paired with a controlled power rail and validated for hot-plug, removal, corruption recovery, and file-system behavior. Sustained throughput depends on the chosen media and host, so system qualification should use representative cards and workloads.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ USB2244-AEZG-05 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| Brand | Microchip Technology |
| Package | 36-QFN (6 x 6 mm) |
| Controller Type | USB 2.0 Flash Media Card Controller |
| Host Interface | I2C |
| Supply Voltage Range | 3 V to 3.6 V |
| Supply Current | 135 mA |
| Supported Media | SD, MMC, and Memory Stick flash media |
| Maximum Sustained Transfer Rate | Greater than 35 MB/s when media and host support the rate |
| Secure Media Support | Read and write provisions for secure media formats |
جیاکەرەوە سەرەکییەکان
- Supports several removable flash-media families (بەراورد بەUSB media controllers limited to one card family)
- High sustained throughput when the complete path supports it (بەراورد بەUSB 1.1 Full-Speed media controllers)
- Secure-media provisions (بەراورد بەBasic mass-storage-only controllers)
- Compact surface-mount implementation (بەراورد بەLarger through-hole controller packages)
تێبینییەکانی دیزاین
Use the exact Microchip land pattern for the 36-QFN, 6 x 6 mm package. A QFN footprint cannot be inferred safely from a generic diagram because terminal pitch, pad length, exposed-pad size, and solder-mask details affect assembly yield. Place the USB traces according to the manufacturer layout guidance, provide a continuous ground reference, and verify the footprint against the final package drawing before releasing Gerber files.
Design the 3 V to 3.6 V supply with margin for tolerance, transient response, and the controller's listed 135 mA supply current. Confirm the required operating voltage for every rail and signal in the USB224x electrical tables, including clock and I/O levels. Route high-current supply and ground returns directly to the relevant pins, keep the loop compact, and validate startup and card insertion across the complete supply range.
Treat USB D+ and D- as a controlled-impedance differential pair. Follow the manufacturer routing and reference-plane guidance, minimize stubs and test pads, and maintain continuous ground beneath the pair. Because USB 2.0 performance depends on host and media capability, test eye diagrams, enumeration, sustained transfers, and error recovery with the intended host controller, cable, connector, and representative flash cards.
Do not assume that every card marked with a supported format behaves identically. Media generation, capacity, command support, wear characteristics, and secure-format implementation can affect operation. Qualification should cover insertion, removal, full-capacity access, sustained transfers, unexpected power loss, filesystem recovery, and host behavior with each card type intended for production.
زانیاری پابەندبوون
No specific compliance declarations were identified for USB2244-AEZG-05 in the accessible manufacturer and distributor records. Confirm lead-finish, RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification status for the exact ordering code before procurement.