USB2244I-AEZG-06 - USB 2.0 SD/MMC/MS/xD Flash Media Controller | Microchip
MPN: USB2244I-AEZG-06 ✓ چالاکUSB2244I-AEZG-06 گشتی
A flash media card controller, also called a card reader controller or storage bridge IC, sits between the USB host port and the physical media connector. It translates USB transactions into SD, MMC, Memory Stick and xD card commands, manages card detection, insertion and removal, and handles card identification and enumeration. Within the interface IC hierarchy, this device belongs to the storage and removable-media controller class of USB interface semiconductors.
The controller targets the full-speed and high-speed USB 2.0 host interface and supports SD, MultiMediaCard, Memory Stick and xD-Picture Card families in a single chip. Operating supply voltage is 3.3 V, matching the 3 V class of USB host controllers and embedded set-top, industrial and consumer media-reader designs. Because the entire card-interface logic, card-detection and USB PHY functions are integrated, systems can be built with one IC plus a media connector instead of a discrete card reader.
According to the Microchip USB2244 product documentation, the part is designed for ultra-high performance operation and average data transfer rates suited to moving large media files quickly. The exposed pad under the 36-QFN package provides a low-impedance thermal path to the PCB copper, which is essential because the controller dissipates power continuously during high-throughput transfers across all four media formats simultaneously supported by the internal engines.
Typical applications include USB 2.0 card readers and dongles, multi-format portable media players, digital camera accessories, industrial data loggers that accept SD or MMC cards, set-top box and smart-TV media slots, and USB-to-flash bridge products for embedded systems that need field-updatable storage.
Design consideration: the card connector layout, card-detect and write-protect signals, plus USB D+/D- routing, must follow the impedance and length rules given in the manufacturer datasheet. Decouple the 3.3 V supply close to the exposed pad with a high-frequency ceramic plus bulk capacitance, and keep the analog card-interface traces away from the USB differential pair to limit crosstalk into the media data path.
This page adds engineering value beyond the manufacturer datasheet by consolidating package and ordering information, verified distributor listings, drop-in alternatives from the same USB2244 family, and practical layout notes for designers integrating multi-format flash media into USB 2.0 products.
جێگرەوەکانی جێگۆڕکێ بۆ USB2244I-AEZG-06 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ USB2244I-AEZG-06 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type, Mounting Type, Exposed Pad, Host Interface.
USB2244-AEZG-06
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →USB2244I-AEZG
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
USB2244I-AEZG-XX
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
USB2241I-AEZG-06
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →USB2240I-AEZG-06
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →USB2244I-AEZG-06 تایبەتمەندییەکان
| Product Type | USB 2.0 flash media card controller (card reader controller) |
| USB Specification | USB 2.0, full-speed and high-speed |
| ڤۆڵتاژی دابینکردنی کارکردن | 3.3 V |
| Host Interface | USB 2.0 device controller with I2C interface |
| Supported Media Formats | SD, MultiMediaCard (MMC), Memory Stick (MS), xD-Picture Card |
| پاکێج | 36-QFN (6x6 mm) with exposed pad |
| ژمارەی پین | 36 pins |
| جۆری دامەزراندن | Surface mount (SMD) |
| Delivery Packaging | Tray |
| Series / Family | USB2244 |
ڕێنمایی ڕێکخستنی پینی USB2244I-AEZG-06 36-qfn (6x6 mm) with exposed pad
ڕێکخستنی پین بۆ USB2244I-AEZG-06 (پاکێجی 36-qfn (6x6 mm) with exposed pad). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ USB2244I-AEZG-06.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
USB2244I-AEZG-06 گونجاوە بۆ 6 بەکارھێنانs: USB 2.0 Multi-Format Card Reader, Digital Camera and Photo Transfer Hub, Industrial Data Logger with Removable Storage, Set-Top Box and Smart TV Media Slot, USB-to-Flash Embedded Storage Bridge, Portable Media Player and AV Accessory.
USB 2.0 Multi-Format Card Reader
The USB2244I-AEZG-06 is the natural choice for a USB 2.0 desktop or portable card reader because a single IC serves SD, MMC, Memory Stick and xD media instead of needing one controller per format. Its 3.3 V single-supply operation matches the bus-powered 5 V host design once a regulator is fitted, and the 36-QFN (6x6 mm) footprint with exposed pad keeps the board compact enough for a dongle form factor. The integrated card detection and media engines remove the need for external multiplexing logic, so firmware only has to enumerate the active card type. Route the USB D+/D- pair as a controlled-impedance differential pair and keep the card clock and data lines away from it to preserve transfer margin.
پێشنیارکراو
Digital Camera and Photo Transfer Hub
Camera accessories and photo transfer kiosks typically need to read several card standards from one USB port, which is exactly the multi-format capability of the USB2244I-AEZG-06. Because the device handles SD, MMC, MS and xD internally, a designer can populate a single media socket set and still present a unified USB mass-storage device to the host. The 3.3 V operating supply integrates cleanly into the camera's existing DC-DC rail plan, and the exposed pad under the 36-QFN package lets the controller sustain sustained high-throughput transfers without an external heat spreader. Expect the card detect and write-protect lines to be driven from the connector shell; bring them up with pull resistors where the datasheet indicates.
پێشنیارکراو
Industrial Data Logger with Removable Storage
Field data loggers need removable, high-capacity storage so that collected records can be carried to a host without cabling, and the USB2244I-AEZG-06 provides a standards-compliant USB 2.0 path into SD or MMC cards. The 3.3 V single-supply architecture suits the 24 V industrial bus designs that already regulate down to a 3.3 V logic rail, and the wide media support lets one board accept whatever card the field service team carries. The 36-QFN (6x6 mm) SMD package is compatible with the small enclosures typical of logger hardware, and the exposed pad provides the thermal path needed during continuous write bursts. Use the manufacturer layout guidance to isolate the card interface from noisy sensor and power-conversion sections.
پێشنیارکراو
Set-Top Box and Smart TV Media Slot
Set-top boxes and smart-TV platforms increasingly include a removable media slot that must appear as a standard USB mass-storage device to the main SoC. The USB2244I-AEZG-06 handles the full USB 2.0 Hi-Speed device protocol and the card-side protocol in one 3.3 V chip, so the set-top design only needs an external USB connector and media socket rather than a second host controller. Because the controller is designed for ultra-high performance operation, sequential large-file transfers to SD or MMC media complete quickly enough for firmware update and media playback workflows. The 36-QFN (6x6 mm) package is small for the space-constrained mainboard, and the exposed pad ties directly into the board ground plane for reliable thermal behavior.
پێشنیارکراو
USB-to-Flash Embedded Storage Bridge
Embedded systems that need to expose internal flash as a removable or host-accessible volume can use the USB2244I-AEZG-06 as the media-facing side of the bridge, with the host communicating over USB 2.0 while the controller handles card enumeration, error recovery and command translation. This is valuable in test fixtures, kiosks and service tools where updates are delivered from standard flash media instead of a network. The 3.3 V supply requirement aligns with most modern embedded 3.3 V rails, and the multi-format support means one bridge design covers SD, MMC, MS and xD sources. Pay close attention to the recommended crystal-free clocking and power sequencing guidance in the manufacturer documentation to keep enumeration reliable across temperature extremes.
پێشنیارکراو
Portable Media Player and AV Accessory
Portable media players and AV accessories frequently need to accept camera cards for content transfer while also acting as a USB device toward a laptop or car head unit. The USB2244I-AEZG-06 delivers Hi-Speed USB 2.0 throughput and multi-format card reading in a 3.3 V part that fits into compact portable enclosures, and its low pin-count surface-mount package leaves board area for the codec and amplifier sections. Since the controller handles both the USB host-facing protocol and the card-side protocol, firmware effort focuses on the user experience rather than on dual-protocol device stacks. Verify the thermal budget for sustained playback-and-copy cycles, and connect the exposed pad to a solid ground pour with thermal vias as shown in the layout guidance.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ USB2244I-AEZG-06 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | USB2244-AEZG-06 | USB2244I-AEZG | USB2244I-AEZG-XX | USB2241I-AEZG-06 | USB2240I-AEZG-06 |
|---|---|---|---|---|---|---|
| Package | 36-QFN (6x6) with exposed pad | 36-QFN (6x6) - same | 36-QFN (6x6) - same | 36-QFN (6x6) - same | 36-QFN (6x6) - same | 36-QFN (6x6) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Product Type | USB 2.0 multi-format flash media card controller | USB 2.0 multi-format flash media card controller | USB 2.0 multi-format flash media card controller | USB 2.0 multi-format flash media card controller | USB 2.0 flash media controller, reduced media feature set | USB 2.0 flash media controller, entry-level feature set |
| Operating Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3 V, 3.6 V |
| USB Interface | USB 2.0 device controller with I2C | USB 2.0 device controller with I2C | USB 2.0 device controller with I2C | USB 2.0 device controller with I2C | USB 2.0 device controller | USB 2.0 device controller |
| Pin Count | 36 pins | 36 pins | 36 pins | 36 pins | 36 pins | 36 pins |
| Mounting Type | Surface mount (SMD) | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
| Ordering Suffix / Grade Code | I-AEZG-06 (industrial suffix, -06 revision) | No I suffix in ordering code | No -06 revision suffix | Variable -XX suffix | Lower feature family member | Lower feature family member |
جیاکەرەوە سەرەکییەکان
- Widest media-format coverage in the family for a single controller (بەراورد بەUSB2241I-AEZG-06)
- Single 3.3 V supply with no external protocol bridge (بەراورد بەUSB2240I-AEZG-06)
- Explicit industrial-grade ordering code for the same footprint (بەراورد بەUSB2244-AEZG-06)
تێبینییەکانی دیزاین
The 36-QFN (6x6 mm) body has an exposed thermal pad that must be soldered to the board. Follow the manufacturer land pattern exactly for pad size and via arrangement, and place the thermal vias inside or immediately under the pad so heat leaves the die at the lowest possible thermal resistance. Do not route sensitive card-data or USB traces through the pad region.
Treat the USB D+/D- pair as a controlled-impedance differential pair with matched length and no stubs, and keep it on a continuous reference plane. Card interface clock, data and command lines should run away from the USB pair to minimize crosstalk into the media data path, which otherwise shows up as enumeration errors or CRC failures on marginal cards.
Decouple the 3.3 V supply at the controller with a high-frequency ceramic placed as close as possible to the power and ground pins, backed by bulk capacitance at the regulator. Because the same rail powers both the USB PHY and the card engines, separating or filtering the analog card-supply branch reduces ripple coupling; follow the recommended capacitor values and placement given in the manufacturer documentation.
Do not substitute across the USB224x family purely on footprint similarity: USB2241I and USB2240I share the 36-QFN (6x6) land pattern but carry a narrower media-format engine, so card support and firmware behavior change. Likewise, ordering codes such as -06, -XX and -TR identify different revisions or delivery formats, and the exposed-pad connection must follow the chosen variant's land pattern.
Card insertion, removal and write-protect detection are handled electrically at the connector, so confirm the pin assignment for card detect and write protect in the pin description table before wiring the socket. Leaving these inputs floating or back-driving them from the connector shell can cause the host to enumerate a card that is not present or to fail to re-enumerate after removal.
زانیاری پابەندبوون
RoHS and REACH status are compared between USB2244 variants by third-party comparison tools but are not stated for this MPN on the manufacturer page; verify the current material declaration with Microchip before release. The part is a 3.3 V commercial/industrial interface controller and is not AEC-Q100 qualified.