USB2250I-NU-06 - USB 2.0 Flash Media Controller | Microchip
MPN: USB2250I-NU-06 ✓ چالاکUSB2250I-NU-06 گشتی
A USB flash media controller is an interface IC that translates USB mass-storage commands into the electrical signaling required by CompactFlash, SmartMedia, xD-Picture Card, Memory Stick, Secure Digital, and MultiMediaCard devices. Within the product hierarchy, this controller belongs to the USB interface controller family, the larger interface IC category, and ultimately the integrated-circuit and semiconductor classifications used for embedded data-transfer systems.
The controller supports more than 24 popular flash-media formats and is designed for applications using single or combination media sockets. Multiple simultaneous card insertions can be handled, while the number of logical units and their assignment to card types remain flexible. These capabilities make the device useful for industrial media readers, portable diagnostic equipment, data acquisition systems, and specialized card-access appliances.
The USB 2.0 Hi-Speed interface supports an average sustained transfer rate exceeding 35 MB/s when both the attached media and host controller can sustain the required throughput. Actual performance depends on the media device, electrical implementation, host software, and workload. The integrated design reduces the need for a separate USB-to-flash bridge while providing a common interface across numerous legacy and removable flash-memory formats.
Typical implementations include CompactFlash readers, multi-slot memory-card stations, industrial data loggers, test and measurement equipment, and embedded systems that must exchange files through removable media. The industrial-grade positioning is relevant where equipment must tolerate extended operating conditions beyond typical consumer environments, although design engineers should verify the exact temperature limits and qualification requirements against the manufacturer datasheet.
PCB implementation requires careful attention to USB signal routing, flash-media interface layout, power integrity, and exposed-pad thermal management. Place the USB transceiver path away from switching nodes and analog-sensitive circuitry, route differential USB traces as a matched pair, and provide the decoupling network specified by the manufacturer near the appropriate supply pins. Use the package land pattern and pin-description tables in the manufacturer datasheet when assigning tracks and assembling the board.
This product page combines manufacturer-family information, verified distributor identification, package details, application analysis, design guidance, and a parameter-by-parameter comparison of supported same-package family alternatives. It is designed to help engineers confirm controller fit, package compatibility, media coverage, thermal planning, and sourcing requirements before committing a USB flash-media interface to a PCB layout.
جێگرەوەکانی جێگۆڕکێ بۆ USB2250I-NU-06 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ USB2250I-NU-06 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, Package Type, Device Classification, Host Interface, Package.
USB2250-NU-06
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →USB2251-NU-06
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →USB2251I-NU-06
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →USB2250I-NU-06 تایبەتمەندییەکان
| Product Type | USB 2.0 flash media controller |
| USB Standard | USB 2.0 Hi-Speed |
| Supported Flash Media Formats | More than 24 formats |
| Average Sustained Transfer Rate | Greater than 35 MB/s |
| Supported Media Families | CompactFlash, SmartMedia, xD-Picture Card, Memory Stick, Secure Digital, MultiMediaCard |
| Media Socket Support | Single or combination media sockets |
| Simultaneous Card Insertion | Supported |
| Logical Unit Assignment | Flexible |
| Application Grade | Industrial grade |
| پاکێج | 128-pin VTQFP, 14 x 14 mm |
| جۆری دامەزراندن | Surface mount |
ڕێنمایی ڕێکخستنی پینی USB2250I-NU-06 128-pin vtqfp, 14 x 14 mm
ڕێکخستنی پین بۆ USB2250I-NU-06 (پاکێجی 128-pin vtqfp, 14 x 14 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ USB2250I-NU-06.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
USB2250I-NU-06 گونجاوە بۆ 6 بەکارھێنانs: Industrial CompactFlash Data Readers, Multi-Slot Memory Card Stations, Portable Test and Measurement Instruments, Industrial Data Loggers, Embedded File Transfer Appliances, Secure Document and Identity Readers.
Industrial CompactFlash Data Readers
The USB2250I-NU-06 fits industrial CompactFlash readers because it combines USB 2.0 mass-storage control with support for more than 24 flash-media formats in a 128-pin VTQFP package. Sustained transfer rates can exceed 35 MB/s when both the host and media support that throughput. The controller translates host storage commands into the appropriate CompactFlash interface, simplifying equipment that must accept removable industrial data media. Its industrial-grade positioning is useful in field-service equipment, factory data collectors, and diagnostic instruments, although final qualification should match the enclosure temperature and operating environment.
پێشنیارکراو
Multi-Slot Memory Card Stations
The USB2250I-NU-06 is appropriate for multi-slot stations that combine CompactFlash, SmartMedia, xD-Picture Card, Memory Stick, Secure Digital, or MultiMediaCard devices behind one USB interface. The manufacturer datasheet states that single or combination media sockets are supported, including multiple simultaneous card insertions, with flexible assignment of logical units. This consolidates several removable-storage standards into one controller-centric design. The 128-pin VTQFP package provides ample board routing capacity, but each media connector requires correct signal routing, protection, and mechanical design.
پێشنیارکراو
Portable Test and Measurement Instruments
The USB2250I-NU-06 supports portable test and measurement instruments that need a standard USB connection to removable flash-media storage. USB 2.0 Hi-Speed operation can exceed 35 MB/s sustained throughput when the connected medium and host permit it, helping reduce the time required to export logs, captures, waveforms, and diagnostic files. Because the controller supports numerous flash-media families, a single instrument platform can accept different media used by field technicians. Board design should preserve USB signal integrity and provide stable, decoupled power rails for reliable transfer operation.
پێشنیارکراو
Industrial Data Loggers
The USB2250I-NU-06 is well suited to industrial data loggers that periodically exchange large files with a host computer. The USB 2.0 interface can sustain more than 35 MB/s under suitable media and host conditions, which shortens the time required to move process logs, configuration records, and event histories from removable flash storage. Support for combination media sockets adds flexibility where operators may use different card formats. Firmware should implement safe removal, media-change handling, write protection, and error recovery according to the application workflow.
پێشنیارکراو
Embedded File Transfer Appliances
The USB2250I-NU-06 supports embedded file-transfer appliances that act as a USB host-accessible bridge to removable flash media. Its integrated USB 2.0 controller and support for more than 24 formats reduce the need for separate media bridges when a product must accept CF, SD, MMC, Memory Stick, SmartMedia, or xD media. A sustained rate above 35 MB/s can accelerate bulk file movement when the storage device is capable. The controller occupies a 128-pin VTQFP footprint, so adequate board area, careful escape routing, and exposed-pad thermal control are important.
پێشنیارکراو
Secure Document and Identity Readers
The USB2250I-NU-06 fits document and identity readers that transfer files from removable flash media to a host computer. USB 2.0 Hi-Speed transfer rates exceeding 35 MB/s under suitable conditions can accelerate access to image-heavy records, while broad media support lets one reader platform accommodate Secure Digital, MultiMediaCard, CompactFlash, and other formats. Because such equipment may process sensitive information, firmware should enforce authentication, safe insertion handling, write-protect behavior, and controlled media removal. PCB layout should keep the USB path isolated from switching and high-current peripheral circuits.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ USB2250I-NU-06 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | USB2250-NU-06 | USB2251-NU-06 | USB2251I-NU-06 |
|---|---|---|---|---|
| Package | 128-pin VTQFP (14 x 14 mm) | 128-pin VTQFP (14 x 14 mm) | 128-pin VTQFP (14 x 14 mm) | 128-pin VTQFP (14 x 14 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Product Type | USB 2.0 flash media controller | USB 2.0 flash media controller | USB 2.0 flash media controller | USB 2.0 flash media controller |
| USB Interface | USB 2.0 Hi-Speed | USB 2.0 Hi-Speed | USB 2.0 Hi-Speed | USB 2.0 Hi-Speed |
| Average Sustained Transfer Rate | Greater than 35 MB/s | Greater than 35 MB/s | Greater than 35 MB/s | Greater than 35 MB/s |
| Supported Flash Media Formats | More than 24 formats | More than 24 formats | More than 24 formats | More than 24 formats |
| Application Grade | Industrial grade | Non-I ordering designation | Non-I ordering designation | Industrial grade |
جیاکەرەوە سەرەکییەکان
- Industrial-grade ordering option in the USB2250 family (بەراورد بەUSB2250-NU-06)
- Broad removable-media coverage (بەراورد بەUSB2251I-NU-06)
- Single-controller support for multiple media standards (بەراورد بەUSB2251-NU-06)
تێبینییەکانی دیزاین
Use the 128-pin VTQFP land pattern and pin table in the Microchip manufacturer datasheet without substituting a generic TQFP footprint. Confirm exposed-pad connections, pad dimensions, and paste design from the package drawing. Place input and output capacitors close to their intended pins, and keep flash-media traces away from noisy power converters or clock sources.
Route the USB differential pair as a tightly coupled pair with continuous reference-plane support and minimize stub branches. Apply the USB impedance guidance from the applicable design documentation and connect chassis or board-shield features according to the product's EMC strategy. Keep connector-to-controller traces short because additional trace length and mismatched vias can degrade USB 2.0 signal integrity.
The VTQFP exposed pad is important for heat transfer from the controller. Provide a solid, uninterrupted ground or supply-plane region beneath the package, follow the manufacturer's solder-mask and paste recommendations, and avoid thermal relief patterns that can reduce cooling performance. For sustained high data activity, calculate junction temperature from actual dissipation and board thermal resistance rather than relying on ambient temperature alone.
Do not assume that the more-than-35-MB/s capability is guaranteed for every card and host combination. Validate performance with the slowest supported media, specify USB host and connector requirements consistently, and implement safe card ejection and write-protect behavior. Also check the I ordering designation, pin functions, media map, and electrical limits before treating a family member as a direct substitution.
زانیاری پابەندبوون
The device is identified as industrial grade, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified. Confirm each status using the manufacturer product declaration or material-compliance documentation before procurement.