Microchip Technology

USB2512AI-AEZG - 2-Port USB 2.0 Hub Controller | Microchip

MPN: USB2512AI-AEZG ✓ چالاک
3 V to 3.6 V Vdss 95 mA Id 36-QFN (6 x 6 mm) Package USB 2.0 Hi-Speed Speed
MOQ: 1 |

USB2512AI-AEZG گشتی

The Microchip Technology USB2512AI-AEZG is a two-port USB 2.0 Hi-Speed hub controller operating from a 3 V to 3.6 V supply, with a listed operating current of 95 mA and a 36-QFN 6 x 6 mm package with an exposed pad. It provides one upstream USB 2.0 connection and two downstream ports for managed peripheral expansion in compact embedded systems.

A USB hub controller is an interface IC that expands one host USB connection into multiple peripheral ports. It belongs to the USB interface controller family, within interface ICs and broader semiconductor categories. By combining USB hub logic with port-management functions, the device simplifies desktop peripherals, kiosks, industrial equipment, and consumer accessories that require more than one USB connection.

The USB2512AI-AEZG supports USB 2.0 Hi-Speed operation and provides two downstream ports. Its 3 V to 3.6 V operating-supply range accommodates standard 3.3 V system rails, while the 95 mA operating current figure provides a useful baseline for power budgeting. The 36-QFN surface-mount package supports compact PCB layouts, and its exposed pad provides a thermal and ground-connection option when the layout follows the manufacturer recommendations.

Microchip describes the USB2512 family as a versatile, cost-effective, and power-efficient platform for USB 2.0 hub implementations. The family uses MultiTRAK technology to support data throughput in mixed-speed USB environments, including low-speed and full-speed devices alongside high-speed peripherals. The two-port configuration is especially useful when a system must accommodate multiple USB peripherals without adding an external host controller.

Typical uses include USB connectivity for industrial control panels, point-of-sale terminals, medical carts, external storage, printers, and monitoring equipment. The controller can serve as the interface between a USB host and two downstream peripherals when system firmware and operating-system support provide the required host behavior. Product designs must also allocate appropriate upstream and downstream USB routing, power, decoupling, and protection.

The primary design consideration is PCB implementation. Place the USB data connections and power paths according to the manufacturer’s USB layout guidance, keep sensitive signal traces short, provide clean supply decoupling, and connect the exposed pad as directed. Ensure the host platform supports the hub and that downstream devices do not exceed the available USB power budget.

This product page organizes the verified specifications, sourcing path, same-footprint alternatives, and application guidance for engineers evaluating the USB2512AI-AEZG. It emphasizes practical design context for USB 2.0 hub implementations while keeping uncertain technical fields explicitly identified rather than inferred.

جێگرەوەکانی جێگۆڕکێ بۆ USB2512AI-AEZG — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ USB2512AI-AEZG (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, Number of Downstream Ports, Package, RoHS Status, Package Dimensions.

Microchip Technology
Product Type: USB 2.0 high-speed 2-port hub controller
RoHS Status: RoHS compliant
بەراوردکردن لەگەڵ USB2512AI-AEZG →
Microchip Technology
Product Type: USB 2.0 high-speed hub controller
Package Dimensions: 6 x 6 mm
بەراوردکردن لەگەڵ USB2512AI-AEZG →
Microchip Technology
Number of Downstream Ports: 2
Package: 36-pin QFN (6x6 mm) with EP
RoHS Status: Compliant
بەراوردکردن لەگەڵ USB2512AI-AEZG →
Microchip Technology
Product Type: USB 2.0 two-port hub controller
RoHS Status: Compliant
Package Dimensions: 6 mm x 6 mm
بەراوردکردن لەگەڵ USB2512AI-AEZG →

USB2512BI-AEZG

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 36-QFN (6 x 6 mm)
USB Hub Controller · USB 2.0 (Low/Full/Hi-Speed) · 2 · 3.3 V · 0°C to +70°C · I²C / SMBus configuration · 24 MHz external crystal · 36-pin QFN (6x6 mm) with EP

پەیوەندی بۆ نرخ

بینینی داتاشیت →

USB2512I-AEZG

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 36-QFN (6 x 6 mm)
USB 2.0 two-port hub controller · USB 2.0 · 1 port · 2 ports · 3 V to 3.6 V · 95 mA · I2C · Single Transaction Translator

پەیوەندی بۆ نرخ

بینینی داتاشیت →

USB2512-AEZG

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 36-QFN (6 x 6 mm)
USB 2.0 high-speed 2-port hub controller · USB 2.0 · 2 ports · 3 V to 3.6 V · 3.3 V · 3.3 V · Integrated · BC1.1 protocol support

پەیوەندی بۆ نرخ

بینینی داتاشیت →

USB2512AI-AEZG تایبەتمەندییەکان

Product Type USB 2.0 Hi-Speed hub controller
Number of Downstream Ports 2 ports
Upstream Port 1 USB 2.0 upstream port
USB Speed USB 2.0 Hi-Speed
ڤۆڵتاژی دابینکردنی کارکردن 3 V to 3.6 V
Operating Current 95 mA
پاکێج 36-QFN (6 x 6 mm)
Exposed Pad Present
ژمارەی پین 36 pins
جۆری دامەزراندن Surface mount
Technology MultiTRAK technology
Supported USB Device Speeds Low-speed, full-speed, and high-speed
Port Management 2 downstream ports
Packaging Tray

ڕێنمایی ڕێکخستنی پینی USB2512AI-AEZG 36-qfn (6 x 6 mm)

ڕێکخستنی پین بۆ USB2512AI-AEZG (پاکێجی 36-qfn (6 x 6 mm)). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 36-qfn (6 x 6 mm) بۆ USB2512AI-AEZG

هیچ داتای وردی پینئاوت بەردەست نییە بۆ USB2512AI-AEZG.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

USB2512AI-AEZG گونجاوە بۆ 6 بەکارھێنانs: Industrial Control Panel USB Hub, Point-of-Sale Terminal Expansion, Medical Cart Peripheral Hub, External Storage and Printer Hub, USB Connectivity in Kiosks, Test and Measurement Data Hub.

🏭

Industrial Control Panel USB Hub

The USB2512AI-AEZG can expand one industrial host connection into two downstream USB 2.0 ports for keyboards, touchscreens, service interfaces, or data acquisition accessories. Its two-port USB hub architecture and 3 V to 3.6 V operating range fit 3.3 V embedded control systems, while the 36-QFN 6 x 6 mm package preserves board area. Mixed-speed device support is useful when the panel combines high-speed storage with low-speed human-interface devices. Designers should preserve USB trace geometry, provide clean supply decoupling, and verify that the host software supports the selected hub topology.

🖥️

Point-of-Sale Terminal Expansion

The USB2512AI-AEZG is useful in point-of-sale equipment that needs to connect multiple peripherals through a single host port. Two downstream USB 2.0 channels can serve a printer, card reader, scanner, or local storage device without distributing host USB resources. The device’s 95 mA listed operating current gives designers a baseline for internal supply planning, separate from downstream bus-current allocation. The compact 36-QFN package also supports space-constrained terminals. Firmware must enumerate the hub correctly, and the power system must remain within USB device and port-current limits.

💊

Medical Cart Peripheral Hub

The USB2512AI-AEZG can provide a controlled USB expansion point in a medical cart or diagnostic system where one host interface must support two peripherals. Its 3 V to 3.6 V supply range suits conventional embedded 3.3 V rails, and the compact QFN package simplifies integration into dense equipment. USB 2.0 hub operation supports mixed-speed peripherals when the host software and connected devices comply with their respective USB classes. Medical designs still require system-level risk assessment, electrical validation, and applicable regulatory review; the USB interface does not independently establish medical-device compliance.

💾

External Storage and Printer Hub

The USB2512AI-AEZG can connect external storage and a printer or another peripheral through a single upstream USB 2.0 link. Its high-speed mode supports bandwidth-oriented devices, while low-speed and full-speed support allows mixed peripheral populations on the same hub. The two downstream-port arrangement reduces the need for external hub adapters in kiosks, benches, and service computers. Board design should allocate regulator capacity for downstream bus power and implement the manufacturer’s USB data-routing recommendations. Thermal and ESD performance should be checked with the final enclosure, cable set, and connected loads.

🖥️

USB Connectivity in Kiosks

The USB2512AI-AEZG suits kiosks that need peripheral flexibility without a multi-port host controller. A single upstream connection can support two USB peripherals such as a receipt printer, card reader, camera, or touch display. The 36-QFN 6 x 6 mm package allows placement close to the connector and supply circuitry, and the two-port configuration simplifies mechanical integration. Because downstream devices determine practical current draw, the system must distinguish controller operating current from USB bus-power demand. Robust cable routing, grounding, surge protection, and operating-system hub support remain essential for reliable deployment.

🔧

Test and Measurement Data Hub

The USB2512AI-AEZG can act as the USB interface for compact test equipment that must expose two peripheral connections to a host computer. The USB 2.0 hub function supports instrument peripherals operating across low-, full-, or high-speed classes, while the small 36-QFN package fits densely populated control boards. Designers should reserve regulator headroom for connected loads, maintain recommended USB impedance and trace geometry, and provide local decoupling close to the controller. For laboratory use, evaluate enclosure grounding, ESD protection, and cable shielding independently of the IC’s USB compliance.

What is the USB2512AI-AEZG?
The USB2512AI-AEZG is a Microchip Technology USB 2.0 Hi-Speed hub controller with one upstream port and two downstream ports. According to the manufacturer datasheet, it operates from 3 V to 3.6 V and is packaged in a 36-QFN 6 x 6 mm package with an exposed pad. It is intended for systems that need to expand one host USB connection into two peripheral connections.
How many USB ports does USB2512AI-AEZG provide?
The USB2512AI-AEZG provides two downstream USB 2.0 ports and connects to the host through one upstream USB 2.0 port. The manufacturer identifies the device as a two-port USB hub controller using MultiTRAK technology for mixed-speed USB environments. This arrangement is useful for peripherals, storage devices, printers, and service interfaces that exceed a host’s available USB port count.
What is the operating voltage of USB2512AI-AEZG?
The USB2512AI-AEZG operates from 3 V to 3.6 V according to the manufacturer product information. This range suits a regulated 3.3 V system rail, but the USB data-line signaling and downstream power requirements must also be satisfied by the host design. Check the complete datasheet power diagrams before assigning supplies or calculating available bus power.
What package does USB2512AI-AEZG use?
The USB2512AI-AEZG uses a 36-QFN surface-mount package measuring 6 x 6 mm and includes an exposed pad. The exposed pad provides a thermal and electrical connection option when routed according to the manufacturer layout instructions. Use the package drawing and land pattern in the manufacturer datasheet rather than treating it as a generic 36-pin QFN footprint.
Where can I download the USB2512AI-AEZG datasheet PDF?
The USB2512AI-AEZG datasheet is available through the official Microchip USB2512 product page at https://www.microchip.com/en-us/product/USB2512. Follow the product page’s documentation links for the manufacturer datasheet, package drawing, and related USB hub-controller information. The PDF is the controlling reference for pin assignments, electrical limits, USB routing, and exposed-pad connections.
Where can I find the USB2512AI-AEZG pinout?
The USB2512AI-AEZG pinout is found in the pin-description and package diagrams in the manufacturer datasheet. The device uses a 36-QFN package, but its exposed pad and numbered perimeter pins must be assigned exactly as shown in the Microchip documentation. Use the pin-description table when assigning power, ground, USB data, configuration, and control connections.
Is USB2512AI-AEZG suitable for mixed-speed USB devices?
Yes, the USB2512AI-AEZG is suitable for mixed-speed USB systems because the USB2512 family supports low-speed, full-speed, and high-speed devices. According to the Microchip product page, MultiTRAK technology is designed to maintain efficient data throughput in mixed-speed environments. Actual application performance still depends on the host software, hub topology, bandwidth demand, and individual device characteristics.
What can replace USB2512AI-AEZG?
The closest documented replacement is the Microchip Technology USB2512BI-AEZG, which uses the same 36-pin QFN package and USB 2.0, 3.3 V interface configuration. The USB2512-AEZG is another 36-QFN two-port USB 2.0 controller option. Confirm pin assignments, electrical limits, management-interface details, and firmware expectations in the datasheet before replacing the original device.
Can USB2512BI-AEZG replace USB2512AI-AEZG?
The USB2512BI-AEZG is a strong same-package candidate for USB2512AI-AEZG because both are Microchip 36-pin QFN USB 2.0 hub controllers intended for a 3.3 V supply. Its I2C management interface differs from the target’s I2C interface according to cross-reference information. Confirm that the existing PCB routing, register behavior, clock requirements, and firmware remain unchanged before treating it as a drop-in replacement.
USB2512AI-AEZG vs USB2512BI-AEZG — which is better?
Choose USB2512BI-AEZG when its newer controller characteristics and register set align with the complete host design; choose USB2512AI-AEZG when its documented behavior is already validated. Both use a 36-pin QFN package, a 3 V to 3.6 V operating range, and USB 2.0 two-port hub functions. The principal decision is functional compatibility rather than a change in basic port count or supply class.
When should I choose USB2512AI-AEZG over USB2512BI-AEZG?
Choose USB2512AI-AEZG when its established USB2512AI behavior matches the system firmware, board layout, and product qualification. Choose USB2512BI-AEZG when the newer B-family controller is specifically supported by the host design or when it offers a documented feature required by the project. The shared 36-QFN package simplifies physical comparison, but it does not replace a full pin and firmware review.
What is the best drop-in replacement for USB2512AI-AEZG?
The Microchip Technology USB2512BI-AEZG is the best-supported drop-in candidate among the documented alternatives because it retains the 36-pin QFN package, USB 2.0 two-port configuration, and 3.3 V operating class. USB2512-AEZG and USB2512I-AEZG are additional same-package options. Validate management pins, exposed-pad connections, electrical limits, and host compatibility before production use.
Where can I buy USB2512AI-AEZG online?
Use the Request a Quote form on this page to inquire about USB2512AI-AEZG availability, current lot conditions, and order handling. The quote workflow provides a direct response without requiring a static quantity-price table. Include the target package suffix, tray or bulk preference, annual demand, and inspection requirements so the commercial response reflects the intended configuration.
What is the price of USB2512AI-AEZG?
Current USB2512AI-AEZG pricing depends on quantity, availability, package configuration, and order conditions. Submit the Request a Quote form on this page with your required quantity and target suffix. The resulting quote can reflect current inventory, lot traceability, delivery timing, and any volume structure without relying on a price that may become stale.
What is the lead time for USB2512AI-AEZG?
Request the current USB2512AI-AEZG lead time through the Request a Quote form on this page. Availability can change with inventory position, package variant, order quantity, and quality requirements, so a production schedule should use the lot-specific commitment returned in the quote. Include your required delivery date when submitting the request.
Is USB2512AI-AEZG in stock?
Submit the Request a Quote form on this page to confirm current USB2512AI-AEZG stock and dispatch timing. The response should identify the exact MPN and package suffix being allocated, along with the quantity available for your order. For production planning, also request lot traceability and inspection details rather than relying on an unconfirmed general availability statement.
What are the key specifications of USB2512AI-AEZG that engineers should know?
The key USB2512AI-AEZG specifications are one upstream USB 2.0 port, two downstream ports, a 3 V to 3.6 V operating supply, and a listed 95 mA operating current. The controller uses a 36-QFN 6 x 6 mm surface-mount package with an exposed pad and supports low-, full-, and high-speed USB devices through the USB2512 family’s MultiTRAK implementation.

داتای سەرچاوەی ئەندازیاری بۆ USB2512AI-AEZG — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the USB2512AI-AEZG when the existing design expects a two-port USB 2.0 hub controller with I2C management in a 36-QFN 6 x 6 mm package and its register behavior has already been validated. Consider the USB2512BI-AEZG for a newer same-package controller when host firmware, management pins, configuration, and timing requirements match. The USB2512I-AEZG is another same-family option when its documented management implementation fits the platform. Use the USB2512-AEZG only after checking the pin and register differences. All candidates share the basic physical package and USB 2.0 two-port category, so final selection should be driven by electrical limits, management behavior, host compatibility, lifecycle requirements, and qualification status rather than package count alone.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە USB2512BI-AEZG USB2512I-AEZG USB2512-AEZG
Package 36-QFN (6 x 6 mm) 36-QFN (6 x 6 mm) 36-QFN (6 x 6 mm) 36-QFN (6 x 6 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Product Type USB 2.0 Hi-Speed hub controller USB 2.0 hub controller USB 2.0 hub controller USB 2.0 hub controller
Number of Downstream Ports 2 ports 2 ports 2 ports 2 ports
Upstream Port 1 USB 2.0 upstream port 1 USB 2.0 upstream port 1 USB 2.0 upstream port 1 USB 2.0 upstream port
Pin Count 36 pins 36 pins 36 pins 36 pins

جیاکەرەوە سەرەکییەکان

  • Two downstream ports with one upstream connection (بەراورد بەUSB2512BI-AEZG)
  • Direct fit within the USB2512 family (بەراورد بەUSB2512-AEZG)
  • Mixed-speed device support (بەراورد بەUSB2512I-AEZG)

تێبینییەکانی دیزاین

Route the upstream and two downstream USB interfaces according to the manufacturer’s layout guidance. Keep data traces short, use continuous reference planes, avoid stubs, and match the board stack-up’s impedance to the USB requirement. Place input and output decoupling close to the corresponding power pins. Verify the exposed-pad connection and thermal-via arrangement against the package drawing rather than assuming a generic QFN land pattern.

Separate the controller’s listed 95 mA operating current from the current available to downstream USB devices. The host-side supply, port-current controls, power switches, and connector protection must support the final peripheral load while maintaining the required USB bus voltage. Do not infer downstream power availability from the controller supply rating, and verify startup current when several devices are connected simultaneously.

A matching QFN package does not by itself prove drop-in compatibility. Confirm pin names, management-interface behavior, configuration requirements, clocking, strap settings, and exposed-pad connections for the exact replacement MPN. Software support and USB host behavior must also be checked, particularly when moving between USB2512AI, USB2512BI, USB2512I, and USB2512 controller variants.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

No specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status is identified for the target MPN.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

USB2512AI-AEZG datasheet USB2512AI-AEZG pinout USB2512AI-AEZG datasheet pdf USB2512AI-AEZG equivalent USB2512AI-AEZG replacement USB2512AI-AEZG cross reference USB2512AI-AEZG vs USB2512BI-AEZG USB2512AI-AEZG 36-QFN footprint USB2512AI-AEZG 3.3V hub controller USB2512AI-AEZG two port USB hub USB2512AI-AEZG price USB2512AI-AEZG stock Microchip USB2512AI-AEZG USB2512AI-AEZG industrial USB hub

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology USB2512AI-AEZG USB2512BI-AEZG USB2512I-AEZG USB2512-AEZG USB2512 USB 2.0 Hi-Speed hub controller USB hub controller USB interface controller interface IC semiconductor MultiTRAK technology low-speed USB full-speed USB high-speed USB I2C management interface 36-QFN QFN package family surface-mount package exposed pad 3.3 V supply two-port USB hub mixed-speed USB environment USB host downstream USB port
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ