W78E051C40PL - 8-bit 8051 MCU, 4KB Flash, 40MHz, 44-PLCC | Nuvoton
MPN: W78E051C40PL ✓ چالاکW78E051C40PL گشتی
An 8051 microcontroller (technically an MCS-51 family MCU) is an 8-bit Harvard-architecture CISC microcomputer originally introduced by Intel in 1980; despite its age the family remains popular in cost-sensitive, deterministic, deeply embedded applications because of its tiny footprint, predictable interrupt latency, and unparalleled third-party tool support. As a Flash EPROM variant the W78E051C family sits at the highest tier of the classic 8051 hierarchy: mask-ROM < OTP EPROM < Flash EPROM, with Flash enabling ISP and field-upgradeable firmware. In the broader taxonomy, an MCU is a programmable subset of a microprocessor and, more generally, a digital integrated circuit under power management and embedded-computing classifications.
Key features include 4 KB Flash program memory, 128 bytes internal RAM, 36 general-purpose digital I/O lines, two 16-bit timers/counters, one UART with framing-error detection, six interrupt sources with two priority levels, on-chip oscillator with external crystal, power-saving Idle and Power-Down modes, and an in-system programming (ISP) interface through the serial port. According to the datasheet the device supports a wide operating frequency range, allowing software to reduce clock speed dynamically for power-sensitive applications.
Architecturally, the W78E051C uses a 12-clock-per-machine-cycle core (the classic 8051 convention) with separate 64 KB program and 64 KB external-data address spaces, plus a 256-byte internal RAM space split between register banks, bit-addressable area, and user RAM. The Flash memory subsystem provides on-chip page-erase and byte-program capability, supporting in-application firmware updates via the UART bootloader on PLCC-package variants.
Typical applications include industrial control subsystems, home appliance mainboards, keyboard/mouse scanners, sensor signal conditioning, low-cost USB bridges, LED display drivers, and legacy 8051 firmware upgrades. The wide frequency range and low-power Idle/Power-Down modes make it suitable for both mains-powered controllers and battery-backed utilities.
Design-wise, ensure the EA/VPP pin is tied to VCC for internal-Fetch operation, or driven to +12 V only during parallel programming. Decouple VCC and AVCC (if present) with 0.1 microfarad ceramic capacitors placed within 5 mm of the pins to suppress switching noise during oscillator start-up and ISP writes.
This page synthesizes distributor pricing, cross-reference drop-in alternatives (Nuvoton W78E052 and W78E058 variants) and practical PCB layout notes not consolidated in the manufacturer datasheet.
جێگرەوەکانی جێگۆڕکێ بۆ W78E051C40PL — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ W78E051C40PL (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Mounting Type, Package, Core Architecture, Product Type, Program Memory.
W78E052C40PL
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →W78E058DPG
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →W78E052BU40PL
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
W78E052BUX40PL
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
W78E052DPG
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →W78E051C40PL زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Core Architecture | 8-bit 8051 (MCS-51 compatible) |
| Program Memory (Flash) | 4 KB (4K x 8) |
| Internal RAM | 128 bytes |
| زۆرترین فرێکوێنسیی کاتژمێر | 40 MHz |
| I/O Pins | 36 (4 x 8-bit ports P0-P3, plus 4-bit P4) |
| Timers/Counters | 2 x 16-bit |
| UART | 1 x full-duplex |
| Interrupt Sources | 6 sources / 2 priority levels |
| پاکێج | 44-PLCC (PL) |
| جۆری دامەزراندن | Surface Mount (PLCC socket or direct solder) |
| Machine Cycle | 12 clocks per instruction cycle |
| Power-Saving Modes | Idle and Power-Down |
| On-chip Oscillator | Yes (external crystal/ceramic resonator) |
| دۆخی RoHS | Compliant |
| Lead-Free | Yes |
ڕێکخستنی پینی W78E051C40PL
| پین 1 | P1.0 — Port 1 bit 0 (bidirectional I/O) |
| پین 2 | P1.1 — Port 1 bit 1 |
| پین 3 | P1.2 — Port 1 bit 2 |
| پین 4 | P1.3 — Port 1 bit 3 |
| پین 5 | P1.4 — Port 1 bit 4 |
| پین 6 | P1.5 — Port 1 bit 5 |
| پین 7 | P1.6 — Port 1 bit 6 |
| پین 8 | P1.7 — Port 1 bit 7 |
| پین 9 | RST — Reset input (active high) |
| پین 10 | P3.0 (RXD) — Port 3 bit 0 / UART receive |
| پین 11 | P3.1 (TXD) — Port 3 bit 1 / UART transmit |
| پین 12 | P3.2 (INT0) — Port 3 bit 2 / External interrupt 0 |
| پین 13 | P3.3 (INT1) — Port 3 bit 3 / External interrupt 1 |
| پین 14 | P3.4 (T0) — Port 3 bit 4 / Timer 0 external input |
| پین 15 | P3.5 (T1) — Port 3 bit 5 / Timer 1 external input |
| پین 16 | P3.6 (WR) — Port 3 bit 6 / External data memory write strobe |
| پین 17 | P3.7 (RD) — Port 3 bit 7 / External data memory read strobe |
| پین 18 | XTAL2 — Crystal oscillator output |
| پین 19 | XTAL1 — Crystal oscillator input |
| پین 20 | GND — Ground |
| پین 21 | P2.0 — Port 2 bit 0 (A8 address bus when external memory used) |
| پین 22 | P2.1 — Port 2 bit 1 |
| پین 23 | P2.2 — Port 2 bit 2 |
| پین 24 | P2.3 — Port 2 bit 3 |
| پین 25 | P2.4 — Port 2 bit 4 |
| پین 26 | P2.5 — Port 2 bit 5 |
| پین 27 | P2.6 — Port 2 bit 6 |
| پین 28 | P2.7 — Port 2 bit 7 |
| پین 29 | PSEN — Program Store Enable (external ROM read strobe) |
| پین 30 | ALE — Address Latch Enable |
| پین 31 | EA/VPP — External Access / Programming voltage (tie to VCC for internal ROM) |
| پین 32 | P4.0 — Port 4 bit 0 (additional I/O) |
| پین 33 | P4.1 — Port 4 bit 1 |
| پین 34 | P4.2 — Port 4 bit 2 |
| پین 35 | P4.3 — Port 4 bit 3 |
| پین 36 | P0.0 — Port 0 bit 0 (AD0 multiplexed address/data when external memory used) |
| پین 37 | P0.1 — Port 0 bit 1 |
| پین 38 | P0.2 — Port 0 bit 2 |
| پین 39 | P0.3 — Port 0 bit 3 |
| پین 40 | P0.4 — Port 0 bit 4 |
| پین 41 | P0.5 — Port 0 bit 5 |
| پین 42 | P0.6 — Port 0 bit 6 |
| پین 43 | P0.7 — Port 0 bit 7 |
| پین 44 | VCC — Positive power supply |
بەکارهێنانە باوەکان
W78E051C40PL گونجاوە بۆ 6 بەکارھێنانs: Industrial Control Subsystems, Home Appliance Mainboards, Keyboard and Mouse Scanners, Sensor Signal Conditioning and Display Drivers, Legacy 8051 Firmware Upgrades, Low-Cost LED Display Drivers.
Industrial Control Subsystems
The W78E051C40PL's deterministic 8051 core, 36 digital I/O lines, and wide operating frequency range suit it for industrial control subsystems such as relay driving, motor start/stop logic, and sensor multiplexing. Its 4 KB Flash holds typical ladder-replacement code, while the bit-addressable ports enable single-pin manipulation crucial for opto-isolated I/O. The MCU's Power-Down mode drops quiescent to microampere levels for always-on industrial nodes, and the 44-PLCC package survives legacy factory-floor retrofits where sockets simplify field replacement.
پێشنیارکراو
Home Appliance Mainboards
White-goods designs (washing machines, microwave ovens, dishwashers, induction cookers) lean on the W78E051C40PL for its 8051 toolchain maturity, abundant bit-addressable I/O for button matrices and seven-segment displays, and low-cost Flash EPROM that supports field firmware revisions. The 40 MHz clock drives PWM routines for motor-speed loops and the full-duplex UART links to inverter modules or BLE add-on boards. Power-Down mode plus the wide frequency range allows a single MCU to manage both standby (<1 mA) and active (<10 mA) states in Energy-Star compliant appliances.
پێشنیارکراو
Keyboard and Mouse Scanners
HID input devices like PS/2-era keyboards and optical mice run comfortably on the W78E051C40PL because the bit-addressable ports scan key matrices efficiently and the two hardware timers debounce switches without software overhead. The UART delivers PS/2-to-USB bridging or wireless dongle protocols, while the 4 KB Flash comfortably holds scan-code translation tables plus macro logic. ISP via the UART bootloader lets manufacturers update keymaps post-production without a programmer socket, and the PLCC socket option accelerates RMA field replacements.
پێشنیارکراو
Sensor Signal Conditioning and Display Drivers
The W78E051C40PL fronts analog sensor arrays with its 36 digital I/O driving multiplexers and 7-segment / LCD digit drivers, while the two 16-bit timers generate precise PWM excitation for temperature, pressure, and humidity transducers. The 6-source / 2-level interrupt controller prioritizes fast sensor-alert responses alongside UART telemetry. The 4 KB Flash accommodates lookup-table linearization for thermocouples and RTDs in HVAC and metering applications, and the wide frequency range lets the same MCU serve battery-powered meters and mains-powered controllers.
پێشنیارکراو
Legacy 8051 Firmware Upgrades
Designers retrofitting older 8051-based boards turn to the W78E051C40PL because it drops into standard 8051 PLCC-44 sockets while upgrading OTP/mask ROM parts to in-system programmable Flash. Existing firmware compiles unchanged thanks to MCS-51 binary compatibility, and the ISP feature enables remote firmware revision via the UART without swapping the chip. The 40 MHz ceiling accelerates legacy routines, the Power-Down mode matches older standby budgets, and the same PLCC-44 footprint preserves PCB layout, heatsinking provisions, and connector placement for legacy industrial enclosures.
پێشنیارکراو
Low-Cost LED Display Drivers
Scrolling message signs, elevator floor displays, and traffic indicators use the W78E051C40PL to drive multiplexed LED matrices because the bit-addressable ports provide column/row control, while the two hardware timers generate refresh intervals without software jitter. The 4 KB Flash holds font tables and animation routines, the UART accepts command packets from a host controller, and the Power-Down mode keeps mains-fail standby power below regulatory thresholds. The PLCC-44 package supports through-hole mounting on large display PCBs where surface-mount fine-pitch QFP would be impractical.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ W78E051C40PL — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | W78E052C40PL | W78E058DPG | W78E052BU40PL | W78E052BUX40PL | W78E052DPG |
|---|---|---|---|---|---|---|
| Brand | Nuvoton Technology Corporation | Nuvoton Technology Corporation | Nuvoton Technology Corporation | Nuvoton Technology Corporation | Nuvoton Technology Corporation | Nuvoton Technology Corporation |
| Package | 44-PLCC | 44-PLCC (same) | 44-PLCC (same) | 44-PLCC (same) | 44-PLCC (same) | 44-PLCC (same) |
| Flash Program Memory | 4 KB | 8 KB | 32 KB | 8 KB | 8 KB | 8 KB |
| Maximum Clock Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| I/O Pins | 36 | 36 | 36 | 36 | 36 | 36 |
| Timers/Counters | 2 x 16-bit | 2 x 16-bit | 3 x 16-bit | 2 x 16-bit | 2 x 16-bit | 3 x 16-bit |
| ISP Bootloader | Yes (UART) | Yes (UART) | Yes (UART) | Yes (enhanced) | Yes (latest rev) | Yes (UART) |
جیاکەرەوە سەرەکییەکان
- Lowest Flash-memory entry point in the W78E052 family (بەراورد بەW78E052C40PL)
- Smaller code footprint than W78E058 for cost-sensitive designs (بەراورد بەW78E058DPG)
- Original PLCC-44 8051 Flash with stable Rev A4 datasheet (بەراورد بەW78E052BUX40PL)
تێبینییەکانی دیزاین
Decouple the W78E051C40PL VCC pin with a 0.1 microfarad ceramic capacitor placed within 5 mm of the package pin and a 10 microfarad bulk electrolytic on the same supply rail. Add a series ferrite bead if the supply is shared with relays or high-side drivers, because the 8051 core is sensitive to VCC droop during ISP writes. Tie the EA/VPP pin to VCC for internal program fetch and avoid leaving it floating. Estimated: total quiescent current remains below 1 mA at 5V in Power-Down mode.
Route the XTAL1/XTAL2 traces symmetrically and keep them short to minimize stray capacitance, which detunes the crystal oscillator and can push the W78E051C40PL off its 40 MHz maximum. Place the load capacitors immediately adjacent to the XTAL pins and provide a ground guard ring on both sides of the crystal traces to suppress noise coupling into adjacent analog inputs. Avoid routing high-speed digital signals parallel to the crystal traces to prevent oscillator jitter on UART baud timing.
Do not drive EA/VPP above VCC during normal operation, because the W78E051C40PL enters parallel programming mode if EA is raised to approximately +12 V. Always ground unused pins on port 0 (which has no internal pull-ups) to prevent floating inputs that draw supply current and may latch into metastable states during reset. When migrating from an older 8051 mask-ROM part, verify that PSEN is not being driven by external memory at boot, otherwise the internal Flash boot path is bypassed.
زانیاری پابەندبوون
RoHS compliance per Nuvoton product page. AEC-Q100 not applicable for this general-purpose industrial MCU. Halogen-free status not stated in the verified datasheet excerpt.