XC2C256-7FT256I - 256-Macro-Cell CPLD | AMD | Industrial
MPN: XC2C256-7FT256I ✗ کۆتایی ژیانXC2C256-7FT256I گشتی
A CPLD is a programmable digital semiconductor that combines programmable logic architecture with non-volatile configuration memory. In the product hierarchy, the XC2C256 belongs to the CoolRunner-II family of CPLDs, which sits between fixed-function logic devices and larger FPGAs. It is intended for designs that require deterministic timing, flexible logic implementation, and configuration retained in non-volatile memory.
The XC2C256-7FT256I provides 256 macro cells, approximately 6,000 gates, a 256 MHz maximum clock, and a 1.8 V core supply. Its industrial temperature rating supports deployments in factory control, telecommunications equipment, instrumentation, and embedded industrial systems. The 256-pin FTBGA package also offers a high pin count for designs with substantial I/O requirements.
The CoolRunner-II architecture uses a fast, deterministic interconnect structure to implement combinational and registered logic. Non-volatile configuration allows the programmed design to remain in the device after power is removed, eliminating the need for an external configuration loader during normal operation. Device configuration still requires the correct AMD/Xilinx design software and programming flow.
Typical uses include bus interface logic, control-plane decoding, industrial I/O expansion, signal conditioning, and embedded system glue logic. The device can be especially useful where a small logic array, stable configuration data, and predictable timing are more valuable than the capacity and programming model of a large FPGA.
PCB implementation requires careful attention to the 256-ball package, power distribution, ground integrity, and high-speed routing. Use the manufacturer package information and pinout when assigning power, configuration, clock, and user I/O signals; verify ball assignments and programmed configuration before releasing a new board.
This page consolidates package, timing, application, and replacement guidance for engineers evaluating the XC2C256-7FT256I. The comparison sections also distinguish speed-grade, temperature-grade, and package options that can look similar in distributor catalogs but are not interchangeable without qualification.
جێگرەوەکانی جێگۆڕکێ بۆ XC2C256-7FT256I — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ XC2C256-7FT256I (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Speed Grade, Temperature Grade, Device Type, Mounting Type.
XC2C256-7FTG256I
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
XC2C256-7FTG256C
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
XC2C256-7FT256C
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC2C256-6FT256C
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC2C256-5FT256C
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
XC2C256-7FT256I زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | CoolRunner-II CPLD |
| Product Family | CoolRunner-II |
| Macro Cells | 256 macro cells |
| Equivalent Logic Gates | Approximately 6,000 gates |
| زۆرترین فرێکوێنسیی کاتژمێر | 256 MHz |
| Speed Grade | 7 |
| Process Technology | 0.18 µm CMOS |
| Core Supply Voltage | 1.8 V |
| مەودای پلەی گەرمیی کارکردن | -40°C to 85°C |
| Temperature Grade | Industrial |
| پاکێج | 256-FTBGA |
| جۆری دامەزراندن | Surface Mount |
| Number of Package Balls | 256 balls |
| Programmable Logic Type | Complex Programmable Logic Device (CPLD) |
| Configuration Memory | Non-volatile configuration |
| Architecture | CoolRunner-II CPLD architecture |
| Logic Family | 6K-gate CPLD family |
ڕێنمایی ڕێکخستنی پینی XC2C256-7FT256I 256 balls
ڕێکخستنی پین بۆ XC2C256-7FT256I (پاکێجی 256 balls). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ XC2C256-7FT256I.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
XC2C256-7FT256I گونجاوە بۆ 6 بەکارھێنانs: Industrial Control Logic, Telecommunications Interface, Bus Decoding and Glue Logic, Signal Conditioning and Data Routing, Instrumentation and Measurement, Embedded System Coordination.
Industrial Control Logic
The XC2C256-7FT256I fits centralized control logic where a design must combine bus decoding, state machines, interlocks, and discrete I/O handling. Its 256 macro cells and approximately 6,000 gates provide enough capacity for several related control functions, while the specified -40°C to 85°C range supports factory equipment operating across a wide ambient range. The non-volatile CoolRunner-II configuration preserves the control program through power cycles, and the 256-FTBGA package provides a high pin count for board-level connections. Engineers should still verify logic-cell utilization, I/O standards, clock requirements, and timing margins against the AMD DS094 datasheet before committing the design.
پێشنیارکراو
Telecommunications Interface
The XC2C256-7FT256I is suitable for telecommunications interface logic that requires deterministic behavior and persistent configuration, such as control decoding, status aggregation, and protocol front-end support. Its maximum listed clock of 256 MHz provides ample timing margin for many control-plane and line-processing tasks, while 256 macro cells allow related functions to share one programmable device. The industrial temperature specification supports equipment deployed in controlled telecommunications environments. Because actual I/O voltage tolerance, bank configuration, and interface timing are design-specific, engineers should compare the target’s pin descriptions and AC timing with the system transceiver, clock source, and isolation requirements.
پێشنیارکراو
Bus Decoding and Glue Logic
The XC2C256-7FT256I can consolidate address decoding, register overlays, interrupt routing, and peripheral adaptation into a single non-volatile CPLD. A 256-macro-cell device is useful when the logic is too distributed for simple fixed gates but does not justify a large FPGA, and its CoolRunner-II architecture supports predictable implementation for tightly timed control paths. The 256-FTBGA package provides many signal locations for multi-bus interfaces, although engineers should minimize unnecessary transitions on sensitive nets and validate every pin assignment against the manufacturer ball map. For designs operating near clock limits, review setup and hold timing at the actual system voltage and temperature rather than relying only on the listed 256 MHz maximum.
پێشنیارکراو
Signal Conditioning and Data Routing
The XC2C256-7FT256I can implement programmable data routing, width conversion, pulse conditioning, and sequencing between sensors, converters, and communication blocks. Its 256 macro cells and approximately 6,000 gates allow moderate parallel datapaths and registered control logic to share one device, while non-volatile configuration simplifies field deployment. The 1.8 V core supply aligns it with compact mixed-signal systems, but each I/O bank must be checked for its supported voltage and interface standard. Place clocks and high-speed routes away from sensitive analog returns, follow the AMD package and escape-routing guidance, and validate edge rates and timing in system simulation.
پێشنیارکراو
Instrumentation and Measurement
The XC2C256-7FT256I fits measurement instruments that need programmable sequencing, trigger logic, acquisition control, and status decoding close to the analog front end. Its 256 macro cells support moderate control complexity without moving all functions into a larger FPGA, and the industrial-grade temperature range is useful in laboratory equipment that may operate in variable ambient conditions. The non-volatile configuration allows a completed instrument design to retain its control firmware immediately after power-up. For precision systems, keep sensitive analog and reference nets away from high-current or fast-edge digital paths, use controlled clock distribution, and confirm timing from the manufacturer’s DS094 tables.
پێشنیارکراو
Embedded System Coordination
The XC2C256-7FT256I can serve as a coordination controller between a processor, memory, communications peripherals, and discrete I/O in an embedded system. It is particularly useful when power-up sequencing, address decoding, interrupt masking, and peripheral adaptation must remain programmable after a firmware update. The CoolRunner-II device combines 256 macro cells with non-volatile configuration, allowing the hardware behavior to be revised without replacing the assembly. Engineers should define ownership of reset, configuration, clocking, and watchdog signals to avoid contention, validate every ball assignment, and check the configuration interface and setup/hold timing against the host processor.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ XC2C256-7FT256I — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | XC2C256-7FTG256I | XC2C256-7FTG256C | XC2C256-7FT256C | XC2C256-6FT256C | XC2C256-5FT256C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 256-FTBGA | 256-FTBGA | 256-FTBGA | 256-FTBGA | 256-FTBGA | 256-FTBGA |
| Device Family | CoolRunner-II | CoolRunner-II | CoolRunner-II | CoolRunner-II | CoolRunner-II | CoolRunner-II |
| Macro Cells | 256 macro cells | 256 macro cells | 256 macro cells | 256 macro cells | 256 macro cells | 256 macro cells |
| Equivalent Logic Gates | Approximately 6,000 gates | 6K gates | 6K gates | 6K gates | 6K gates | 6K gates |
| Speed Designation | 7 | 7 | 7 | 7 | 6 | 5 |
| Core Supply Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Process Technology | 0.18 µm CMOS | 0.18 µm CMOS | 0.18 µm CMOS | 0.18 µm CMOS | 0.18 µm CMOS | 0.18 µm CMOS |
| Mounting Type | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Surface Mount |
جیاکەرەوە سەرەکییەکان
- Industrial-temperature capability in the 256-FTBGA CoolRunner-II family (بەراورد بەXC2C256-7FT256C)
- Matches the 7 speed designation of the closest same-package options (بەراورد بەXC2C256-6FT256C)
- Combines 256 macro cells with non-volatile configuration (بەراورد بەXC2C256-128-7VQ100C)
- Industrial-grade selection without changing the 256-FTBGA footprint (بەراورد بەXC2C256-7FTG256C)
تێبینییەکانی دیزاین
Treat the 256-FTBGA layout as a dense fine-pitch routing problem. Follow the manufacturer package drawing for ball coordinates, power assignment, and escape routing, and confirm the selected assembly rules support the 1.0 mm ball pitch. Provide uninterrupted power and ground planes, use short via connections to the device, and inspect the finished board for voids, shorts, and assembly registration before programming the CPLD.
Decouple the 1.8 V core supply close to the device and route it with low-impedance power and ground connections. Use the capacitor values, voltage rating, and placement guidance in AMD DS094 and the selected device’s pin descriptions. Do not infer I/O-bank supply requirements from the 1.8 V core value alone; verify each bank separately and keep noisy external circuitry away from sensitive reference and clock paths.
Route clocks and high-speed I/O with continuous reference planes and minimize stubs, vias, and right-angle transitions. Keep configuration, reset, and programming signals away from sensitive timing nets. For designs operating near the listed 256 MHz maximum, evaluate setup and hold timing with realistic board skew, load, and external transceiver delay rather than relying on the nominal frequency alone.
Do not substitute an XC2C256 option based only on the 256-FTBGA package. The 5, 6, and 7 speed designations can change timing margins, while the I and C suffixes identify different temperature grades. Validate the exact ordering code, operating range, configuration compatibility, and AC timing in AMD documentation before approving a replacement for production hardware.
زانیاری پابەندبوون
The exact MPN listing identifies an industrial-temperature 256-FTBGA CPLD, but specific RoHS, REACH, halogen-free, lead-free, and conflict-minerals declarations are not stated. Verify them against the current AMD product documentation and the ordered manufacturer part number before procurement.