XC3S50-4VQG100C - 50K Spartan-3 FPGA | Xilinx | 100-TQFP
MPN: XC3S50-4VQG100C ✗ کۆتایی ژیانXC3S50-4VQG100C گشتی
A field-programmable gate array is a semiconductor whose digital logic and interconnect can be configured after fabrication. Within the technology hierarchy, an FPGA is a programmable logic device and a semiconductor. The Spartan-3 family targets cost-sensitive designs requiring more capability than basic programmable logic devices while maintaining relatively low system complexity. The XC3S50-4VQG100C combines 50,000 system gates with 72 Kb of block RAM and a stated 630 MHz performance figure.
The principal device features include 90 nm fabrication technology, 1.2 V core voltage, a 100-pin TQFP package, and a -4 performance designation. Its 1,584 logic cells provide parallel hardware resources for control logic, data acquisition, communications, and signal-processing functions. The available distributor records identify a 0°C to 85°C commercial operating-temperature range, while exact I/O counts, supported I/O standards, and detailed timing constraints require confirmation in the manufacturer documentation.
Spartan-3 devices use configurable logic blocks, programmable interconnect, and block RAM to implement digital systems. This architecture allows parallel datapaths and state-machine logic to execute concurrently instead of relying on sequential software instructions. The -4 speed grade identifies a specific performance class within the Spartan-3 family, but clocking and I/O timing must be evaluated against the design's actual constraints and the selected device documentation.
Typical uses include industrial control, instrument interfaces, industrial communications, educational FPGA platforms, digital signal processing, and low-cost embedded systems. The 100-pin package also makes the device suitable for boards that need a meaningful number of I/O without moving to a large ball-grid-array package. Designers should verify voltage-tolerant I/O, differential I/O availability, pin constraints, and board-level power requirements before schematic capture.
A primary design consideration is decoupling around the 1.2 V core and any supported I/O supplies. Place the required capacitors close to their supply pins, route high-current paths with low loop area, and use an FPGA-supported configuration scheme and clock source. Because this is an older FPGA family, toolchain availability, programming-file support, and the selected package’s exact pin map should be confirmed before committing a new design to production.
This product page combines verified distributor specifications, an honest assessment of drop-in alternatives, package and sourcing information, and practical design guidance to support faster engineering evaluation while clearly identifying details that still require manufacturer-documentation verification.
جێگرەوەکانی جێگۆڕکێ بۆ XC3S50-4VQG100C — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ XC3S50-4VQG100C (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Logic Cells, Device Type, Speed Grade, Operating Temperature.
XC3S50-4VQ100C
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC3S50A-4VQG100C
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC3S50A-4VQG100I
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC3S50-4VQG100I
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →XC3S50-5VQG100C
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →XC3S50-4VQG100C زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | Spartan-3 field-programmable gate array (FPGA) |
| System Gates | 50,000 gates |
| Logic Cells | 1,584 cells |
| Logic Blocks | 192 blocks |
| Block RAM | 72 Kb |
| Performance Grade | -4 |
| Stated Performance | 630 MHz |
| Core Supply Voltage | 1.2 V |
| Fabrication Technology | 90 nm |
| پاکێج | 100-pin TQFP (VQ100) |
| Package Pitch | 0.5 mm |
| پلەی گەرمیی کارکردن | 0°C to 85°C |
| Lead-Free Status | Lead-free |
| Programmable Logic | Configurable FPGA logic and interconnect |
| Embedded Memory | 72 Kb block RAM |
| I/O Pin Count | 100 pins |
ڕێنمایی ڕێکخستنی پینی XC3S50-4VQG100C 0.5 mm
ڕێکخستنی پین بۆ XC3S50-4VQG100C (پاکێجی 0.5 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ XC3S50-4VQG100C.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
XC3S50-4VQG100C گونجاوە بۆ 6 بەکارھێنانs: Industrial Control and Automation, Digital Signal Processing, Embedded Communications Bridge, Instrumentation and Data Acquisition, Educational FPGA Prototyping, Video and Display Support Logic.
Industrial Control and Automation
The XC3S50-4VQG100C fits compact industrial-control logic because its 1,584 logic cells and 72 Kb of block RAM can implement state machines, sequencing, counters, and parallel control channels on one programmable device. The verified 0°C to 85°C commercial-temperature rating is appropriate for many indoor factory equipment designs, while the 100-pin TQFP package simplifies assembly compared with a large FPGA BGA. Engineers can place it between sensors or actuator interfaces and a communications controller, using the block RAM for FIFO buffers and the programmable logic for protocol handling. The principal qualification step is verifying every differential I/O, isolated-interface, and 24 V-adjacent peripheral connection against the exact pin and I/O-standard tables.
پێشنیارکراو
Digital Signal Processing
The XC3S50-4VQG100C can execute parallel digital signal-processing functions using its 50,000 system gates and 72 Kb of block RAM. Filters, correlation, waveform generation, and fixed-point arithmetic can be distributed across logic resources instead of being executed sequentially, while the advertised -4 speed grade and 630 MHz performance figure provide a basis for initial timing planning. The 100-pin package is useful for moderate-channel-count processing systems that need both dedicated I/O and local sample storage. Design verification should establish the actual sample rate, DSP arithmetic width, pipeline latency, clock margin, and I/O toggle rate before relying on the headline performance value for a production acquisition or modulation system.
پێشنیارکراو
Embedded Communications Bridge
The XC3S50-4VQG100C is suitable for a dedicated communications bridge because programmable logic can terminate multiple interface formats, move data through dual-port block RAM, and add protocol-conversion logic in parallel. A 100-pin package provides enough connections for a modest parallel data bus plus control and clock signals, and the -4 grade supports designs that require more performance than basic CPLDs. Use the FPGA for framing, filtering, CRC generation, and rate conversion while delegating host control to a microcontroller or embedded processor. Before layout, confirm whether the required interfaces are voltage-tolerant, whether differential I/O is present in this package, and whether the configuration scheme retains access to JTAG or another programming interface.
پێشنیارکراو
Instrumentation and Data Acquisition
The XC3S50-4VQG100C fits moderate-speed instrumentation and data-acquisition systems that need deterministic parallel sampling, digital filtering, and control in one device. Its 1,584 logic cells can implement acquisition control and calibration logic, while 72 Kb of block RAM can provide sample buffering, trigger storage, or communication FIFOs. The 100-pin TQFP package is compatible with lead-based board-assembly practices and exposes a useful mix of configuration, power, clock, and user I/O pins. The verified 0°C to 85°C range suits many laboratory and commercial instruments, but precision applications still require calibration, clock-jitter analysis, front-end protection, and confirmation that every selected I/O standard operates at the required voltage and data rate.
پێشنیارکراو
Educational FPGA Prototyping
The XC3S50-4VQG100C is well suited to FPGA education, logic prototyping, and coursework because it combines a Spartan-3 architecture, 1,584 logic cells, 72 Kb of block RAM, and a manageable 100-pin package. Students can implement counters, processors, state machines, FIR functions, memory controllers, and interface experiments without moving immediately to a large BGA FPGA. Its available documentation and distributor references make legacy Spartan-3 examples easy to find, although current university toolchains must be checked for device-file and cable support. For a new teaching board, include a stable configuration mechanism, JTAG access, user LEDs or switches, multiple clock sources, and a properly decoupled 1.2 V supply so students can focus on architecture rather than board bring-up.
پێشنیارکراو
Video and Display Support Logic
The XC3S50-4VQG100C can provide auxiliary video timing, pixel processing, control, and interface logic in cost-sensitive display systems. Parallel programmable pipelines are useful for format conversion, color-component routing, overlay generation, or timing-control functions, and the 100-pin package can accommodate a moderate parallel interface. The 72 Kb block RAM provides limited line buffering or control storage, so full-frame buffering generally exceeds the device’s capacity and should be placed in external memory. Engineering review must compare the required pixel clock and data lanes with the exact I/O timing tables, verify output voltage standards, and account for connector or display power sequencing. The device is more appropriate for support logic than for demanding high-resolution video processing.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ XC3S50-4VQG100C — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | XC3S50-4VQ100C | XC3S50A-4VQG100C | XC3S50A-4VQG100I | XC3S50-4VQG100I | XC3S50-5VQG100C |
|---|---|---|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Package | 100-pin TQFP (VQ100) | 100-pin TQFP (VQ100) | 100-pin TQFP (VQ100) | 100-pin TQFP (VQ100) | 100-pin TQFP (VQ100) | 100-pin TQFP (VQ100) |
| FPGA Family | Spartan-3 | Spartan-3 | Spartan-3A | Spartan-3A | Spartan-3 | Spartan-3 |
| Speed Grade | -4 | -4 | -4 | -4 | -4 | -5 |
جیاکەرەوە سەرەکییەکان
- Lower system-gate count than the Spartan-3A option (بەراورد بەXC3S50A-4VQG100C)
- Original Spartan-3 configuration for established designs (بەراورد بەXC3S50A-4VQG100C)
- Five-stage speed option remains within the stated proximity range (بەراورد بەXC3S50-5VQG100C)
تێبینییەکانی دیزاین
The verified core supply is 1.2 V, but complete board power design requires the package-specific supply pins, I/O voltage requirements, and startup sequencing from the manufacturer documentation. Place required bypass capacitors immediately beside their associated power and ground pins, use separate paths for core current and fast-switching I/O current, and avoid sharing narrow neck regions between supply planes. Because no verified dissipation or thermal-resistance figures were provided, do not convert the 1.2 V core voltage directly into a thermal estimate without the actual current and utilization.
The verified package is a 100-pin TQFP with 0.5 mm pitch, so assembly and routing require a footprint capable of handling fine-pitch leads and lead-free soldering. Use the exact manufacturer land pattern rather than adapting a generic QFP drawing. Keep configuration pins, clock inputs, and JTAG access testable, provide a solid ground reference beneath the device, and route high-speed or differential signals over a continuous reference plane. Review every pin for voltage tolerance before attaching external equipment or board-level buses.
Do not treat a matching VQ100 package name as proof that two Spartan-3 order codes are fully interchangeable. Compare the ordering guide for temperature grade, lead-free status, speed grade, configuration method, power pins, and package revision, then diff every symbol in the pin table. The supplied data also lacks the exact XC3S50-4VQG100C pin list, so this record deliberately leaves pinout null. Regenerate timing constraints, bitstreams, and board test procedures for any substitution rather than carrying over an existing image without verification.
زانیاری پابەندبوون
The verified search record describes the XC3S50-4VQG100C as lead-free, but it does not explicitly provide exact-MPN RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals declarations. These statuses must be confirmed from current manufacturer documentation.