XC3S50A-4TQG144C - Spartan-3A FPGA, 108 I/O | AMD
MPN: XC3S50A-4TQG144C ✗ کۆتایی ژیانXC3S50A-4TQG144C گشتی
A field-programmable gate array is a semiconductor whose digital logic, interconnect, and input/output behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, alongside CPLDs, but provides substantially more configurable logic and routing resources. This makes it suitable for parallel data acquisition, protocol conversion, control sequencing, embedded signal processing, and other designs that benefit from hardware concurrency. Configuration data determines the implemented circuit, allowing design revisions without changing the PCB.
The Spartan-3A architecture combines programmable logic blocks, dedicated block RAM, digital clock management resources, and selectable I/O standards in a single device. The 108 I/O positions give a board designer substantial connectivity in a 144-lead surface-mount package. The 250 MHz headline operating figure should not be interpreted as a guaranteed logic-clock rate for every arbitrary design; actual timing depends on the selected clocking resources, routing path, I/O standard, speed grade, and board conditions.
The -4 suffix identifies the device speed grade, while the TQG144C portion identifies the 144-pin package and device-grade ordering information. This ordering code must be checked against the PCB footprint, temperature grade, and production requirements rather than treated as interchangeable with every XC3S50A suffix. The Spartan-3A family is an established programmable-logic platform, and the official DS529 family data sheet remains the primary document for configuration requirements, pin descriptions, electrical characteristics, and package drawings.
Typical uses include industrial control and data acquisition, serial-interface bridging, embedded communications gateways, low-cost test equipment, and compact embedded processing systems. A microcontroller can handle supervisory control while the FPGA performs deterministic sampling, protocol conversion, or parallel computations in parallel with the processor. Such partitioning reduces pressure on a general-purpose CPU and can simplify timing-sensitive implementations.
Board design should follow the AMD package pinout and configuration guidance exactly. Confirm that the LQFP-144 footprint, power rails, decoupling, configuration interface, and JTAG connections match the selected board revision. Because the Spartan-3A is a mature architecture, also verify software-tool support, bitstream compatibility, and the availability of any required configuration memory before committing the design to production.
This product record combines the exact XC3S50A-4TQG144C identifiers with the AMD family data sheet and same-package replacement analysis. It also highlights practical configuration, layout, timing, and thermal checks that engineers can apply when qualifying an FPGA design for low-cost, compact, or industrial equipment.
جێگرەوەکانی جێگۆڕکێ بۆ XC3S50A-4TQG144C — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ XC3S50A-4TQG144C (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Device Type, Package, System Gates, Block RAM, Core Supply Voltage.
XC3S50A-4TQG144I
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC3S50A-4TQ144C
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC3S50A-4TQ144I
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC3S50AN-4TQG144C
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC3S50A-4TQG144C زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | Spartan-3A field-programmable gate array (FPGA) |
| Logic Cells | 15,840 cells |
| User I/O Count | 108 I/O |
| Internal Configuration Bits | 1,584 bits |
| Maximum Device Operating Frequency | 250 MHz |
| Block RAM | 6.8 kB |
| Speed Grade | -4 |
| Core Supply Voltage | 1.2 V |
| پاکێج | 144-pin LQFP |
| Package Pin Count | 144 pins |
| جۆری دامەزراندن | Surface mount |
| Commercial Temperature Range | 0C to 85C |
| Junction Temperature | 85C |
| Logic Delay | 0.71 ns |
| Programmable Logic Type | SRAM-configurable FPGA |
ڕێنمایی ڕێکخستنی پینی XC3S50A-4TQG144C 144 pins
ڕێکخستنی پین بۆ XC3S50A-4TQG144C (پاکێجی 144 pins). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ XC3S50A-4TQG144C.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
XC3S50A-4TQG144C گونجاوە بۆ 6 بەکارھێنانs: Industrial Data Acquisition, Serial Protocol Conversion, Embedded Test and Measurement, Industrial Control and Sequencing, Communications Gateway, Compact Embedded Processing System.
Industrial Data Acquisition
The XC3S50A-4TQG144C is well suited to parallel data-acquisition and signal-conditioning control where multiple digital channels must be sampled, timestamped, and transferred reliably. Its 108 user I/O provide ample board-level connectivity, while 15,840 logic cells can implement parallel acquisition logic, control state machines, and data-format conversion. The -4 speed grade supports a maximum device frequency of 250 MHz, although the selected clocking and routing path determine the usable acquisition rate. Use AMD DS529 to assign I/O standards, review timing constraints, and preserve the required 1.2 V core supply.
پێشنیارکراو
Serial Protocol Conversion
The XC3S50A-4TQG144C can bridge incompatible serial formats by running multiple clock domains and protocol engines in parallel. Its 15,840 logic cells support framing, CRC generation, FIFOs, and state machines, while 6.8 kB of block RAM supports modest buffering between interfaces. The 108-I/O count simplifies simultaneous control, interrupt, and serial signals. Designers should establish timing constraints for each clock domain and verify the selected I/O standard, termination, and signal-integrity arrangement against the specific bus being implemented.
پێشنیارکراو
Embedded Test and Measurement
In a compact test instrument, the XC3S50A-4TQG144C can implement precise timing, pattern generation, capture, and data-formatting functions without relying entirely on a microcontroller. Its parallel programmable logic is useful for coordinating several instrument channels, while the 250 MHz maximum device frequency provides ample timing headroom for moderate-rate systems. Block RAM can hold acquisition and calibration records. The design should use the manufacturer's JTAG and configuration guidance and include boundary-scan access for production test and board-level troubleshooting.
پێشنیارکراو
Industrial Control and Sequencing
The XC3S50A-4TQG144C can execute deterministic machine-control sequencing, interlocks, pulse generation, and actuator coordination in parallel with a supervisory processor. Its 108 I/O support digital field signals, status inputs, and machine outputs, while the programmable logic fabric allows timing behavior to be updated independently of application firmware. For a commercial-temperature installation, operate within the listed 0C-to-85C junction-temperature range and review power dissipation at the implemented switching activity. For wider ambient conditions, choose an I-grade same-footprint option.
پێشنیارکراو
Communications Gateway
The XC3S50A-4TQG144C can serve as a hardware-assisted gateway for translating and buffering data between legacy and modern communications interfaces. The FPGA fabric can execute packetization, filtering, byte alignment, and CRC operations concurrently, while 6.8 kB of block RAM provides temporary packet storage. With 108 I/O, the device also accommodates control signals and multiple interface lanes. Engineers should assign endpoints to suitable banks, constrain input and output delays, and validate timing because the maximum 250 MHz device rate does not guarantee equal rates for every I/O or routing path.
پێشنیارکراو
Compact Embedded Processing System
The XC3S50A-4TQG144C can complement a microcontroller or application processor by handling parallel sampling, waveform generation, or time-critical filtering while the processor manages the user interface and configuration. Its 15,840 logic cells allow moderately complex datapaths to be implemented in hardware, reducing execution load on the host processor. The compact 144-pin LQFP also helps limit board area compared with larger FPGA packages. Partition tasks according to timing requirements and use the manufacturer configuration, JTAG, clocking, and I/O-standard guidance to keep the hardware interface deterministic.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ XC3S50A-4TQG144C — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | XC3S50A-4TQG144I | XC3S50A-4TQ144C | XC3S50A-4TQ144I | XC3S50AN-4TQG144C |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 144-pin LQFP | 144-pin LQFP | 144-pin LQFP | 144-pin LQFP | 144-pin LQFP |
| Product Family | Spartan-3A | Spartan-3A | Spartan-3A | Spartan-3A | Spartan-3AN |
| Speed Grade | -4 | -4 | -4 | -4 | -4 |
جیاکەرەوە سەرەکییەکان
- Provides the same 108-I/O Spartan-3A interface while supporting an industrial-grade ordering option (بەراورد بەXC3S50A-4TQG144I)
- Provides a straightforward same-package route for Spartan-3A -4 designs (بەراورد بەXC3S50A-4TQ144C)
- Combines compact 144-lead packaging with full Spartan-3A logic resources (بەراورد بەXC3S50A-4TQ144I)
- Targets a mature 250 MHz Spartan-3A platform for compact parallel processing (بەراورد بەXC3S50AN-4TQG144C)
تێبینییەکانی دیزاین
Separate the 1.2 V core rail from the I/O supply requirement described in AMD DS529, and provide the recommended local ceramic bypass capacitance at each supply pin. Route high-current return paths directly through the ground plane rather than through weak signal traces. Check the configuration-startup current and power-supply transient response because the core and I/O rails may not be sequenced identically.
Use the official TQG144 package drawing to define pad lengths, solder-mask clearance, and land pattern. Keep the FPGA close enough to its bypass capacitors and configuration interface to minimize loop area, but preserve access to all leads for inspection and rework. Confirm pin assignments in the pin-description table rather than relying on package code conventions.
Do not treat the listed 250 MHz maximum device frequency as an unconditional clock target. Constrain every clock, establish realistic input and output delays, and analyze each routed path in the selected FPGA configuration. Mixed clock domains also require a deliberate crossing strategy. Configuration bitstreams must match the exact device, package, speed grade, and temperature ordering code.
Estimate the device's activity-dependent dissipation and junction temperature before setting the switching rate and I/O load. Keep the 144-LQFP footprint on uninterrupted ground copper where the package and board rules permit, and use nearby thermal vias to reduce local temperature gradients. Leave adequate airflow or board spacing when the enclosure is sealed or the ambient temperature is high.
Assign each external interface to a compatible I/O bank and apply the manufacturer's drive, slew, pull-up, pull-down, and input-voltage guidance. Match trace lengths where source-synchronous timing requires it, and provide the specified termination for high-speed or impedance-sensitive links. Validate signal integrity with the final trace geometry and external loading rather than only the nominal clock frequency.
زانیاری پابەندبوون
The device is an industrial FPGA rather than an automotive-qualified component. Compliance fields remain unknown because no definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact ordering code.