XC6SLX100-3FG484I - 667 MHz Spartan-6 LX FPGA | AMD
MPN: XC6SLX100-3FG484I ✓ چالاکXC6SLX100-3FG484I گشتی
A field-programmable gate array is a semiconductor whose digital logic, interconnect, and selected I/O resources are configured after manufacture. Within the product hierarchy, the XC6SLX100 belongs to the Spartan-6 LX FPGA family, combines programmable logic with configurable I/O, and occupies the position between fixed-function logic devices and larger soft processors or ASICs. This flexibility permits one board design to support multiple interfaces and can shorten development cycles compared with a custom ASIC.
The -3 speed designation identifies the high-performance Spartan-6 speed grade, while the industrial suffix denotes operation from 0°C to 85°C. The device has 484 package balls and a lead-free CSBGA package. The product listing also identifies the family as Spartan-6 LX, and the device family documentation identifies -3 as the highest-performance grade among the listed Spartan-6 LX speed options.
Spartan-6 LX devices combine programmable logic blocks with selectable I/O standards and dedicated resources for clocking, memory, and communications. Designers can implement parallel data acquisition, industrial interfaces, control logic, protocol bridges, and embedded systems without relying on a separate processor. The 0.80 mm ball pitch requires careful PCB layout, escape routing, and assembly-process control, especially when high-density fanout is required around the device.
Typical uses include industrial factory automation, programmable logic controllers, instrument controllers, communication infrastructure, video-processing front ends, and embedded test systems. Its industrial temperature rating supports equipment intended for controlled factory and commercial environments, although thermal design must account for power dissipation beneath the large ball-grid array.
For PCB implementation, use the AMD Spartan-6 package pinout files when assigning every power, ground, configuration, clock, and user I/O ball. Follow the package-specific via and solder-mask-land patterns, provide the required configuration circuitry, and complete signal-integrity and power-integrity analysis before fabrication.
This page organizes the verified device identity, package details, temperature information, same-family alternatives, comparison parameters, and practical design guidance. It also distinguishes exact ordering-code differences that engineers must verify before reusing an existing FPGA board layout or approving an alternate component.
جێگرەوەکانی جێگۆڕکێ بۆ XC6SLX100-3FG484I — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ XC6SLX100-3FG484I (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Device Type, Operating Temperature, Speed Grade, Package, Mounting Type.
XC6SLX100-3FG484C
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC6SLX100-2FG484I
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC6SLX100-2FG484C
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC6SLX100-2FGG484I
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
XC6SLX100-2FGG484C
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
XC6SLX100-3FG484I زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | Spartan-6 LX Field Programmable Gate Array |
| Internal Frequency | 667 MHz |
| Package Type | CSBGA-484 |
| Package Dimensions | 19 mm x 19 mm |
| Ball Pitch | 0.80 mm |
| ژمارەی پین | 484 pins |
| پلەی گەرمیی کارکردن | 0°C to 85°C |
| Speed Grade | -3 |
| جۆری دامەزراندن | Surface Mount |
| Terminal Finish | Lead Free |
| دۆخی RoHS | RoHS non-compliant |
ڕێنمایی ڕێکخستنی پینی XC6SLX100-3FG484I 19 mm x 19 mm
ڕێکخستنی پین بۆ XC6SLX100-3FG484I (پاکێجی 19 mm x 19 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ XC6SLX100-3FG484I.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
XC6SLX100-3FG484I گونجاوە بۆ 6 بەکارھێنانs: Industrial Factory Automation Controllers, Programmable Logic Controller Platforms, Communications and Protocol Bridges, Data Acquisition and Instrumentation, Embedded Video and Image Processing, Aerospace Test and Measurement Systems.
Industrial Factory Automation Controllers
The XC6SLX100-3FG484I fits machine-control systems that combine deterministic parallel logic with multiple industrial I/O requirements. Its -3 speed grade provides additional timing margin for control paths, while the 0°C-to-85°C industrial range suits controlled factory environments. Implement interlocks, encoder decoding, pulse counting, and actuator sequencing in programmable logic, then verify all interfaces against the selected bank voltage. The 19 mm by 19 mm CSBGA also demands careful via-in-pad or via-in-land design for escape routing.
پێشنیارکراو
Programmable Logic Controller Platforms
The XC6SLX100-3FG484I is appropriate for compact PLC platforms that execute control logic concurrently with communications and data acquisition. Its 667 MHz internal frequency and -3 performance class support timing-critical pipelines, while programmable I/O can be assigned to field-bus, digital I/O, and analog-interface circuitry. Engineers should reserve configuration resources, validate clock-domain crossings, and budget I/O voltage levels for every attached sensor or actuator. Industrial qualification also requires thermal testing under the maximum expected switching activity.
پێشنیارکراو
Communications and Protocol Bridges
The XC6SLX100-3FG484I can implement parallel-to-serial protocol conversion, test patterns, packet framing, and custom interface logic in networking equipment. The 484-ball CSBGA provides extensive interconnect and I/O options for multi-lane designs, while the -3 grade improves timing margin in wide parallel buses. Place external memory, transceivers, and clock sources according to the AMD Spartan-6 layout guidance, and constrain high-speed paths to avoid margin loss. Signal-integrity validation is essential where routing crosses package boundaries or supports high data rates.
پێشنیارکراو
Data Acquisition and Instrumentation
The XC6SLX100-3FG484I is suitable for parallel data-acquisition front ends that require synchronized sampling, digital filtering, buffering, and data formatting. Its programmable logic fabric can run acquisition pipelines and control sequencing while external converters provide analog conversion. The -3 speed grade offers additional timing margin for wide counters, parallel-to-serial conversion, and memory interfaces. Designers must confirm supported I/O standards and bank voltages, apply clocking discipline to minimize acquisition skew, and simulate timing after placement rather than relying only on pre-route estimates.
پێشنیارکراو
Embedded Video and Image Processing
The XC6SLX100-3FG484I can implement pixel pipelines, color processing, thresholding, and frame timing for embedded imaging systems. Its 667 MHz internal frequency and -3 speed grade provide timing margin for parallel pixel streams, while the large 484-ball package exposes enough I/O for video interfaces and external memory. Clock-domain-crossing and line-buffer placement remain the dominant design concerns. Use source-synchronous routing techniques, validate memory timing, and include frame-buffer bandwidth in the system-level power and thermal budget.
پێشنیارکراو
Aerospace Test and Measurement Systems
The XC6SLX100-3FG484I fits ground-based test systems that generate deterministic patterns, coordinate instruments, and analyze high-speed digital responses. Its programmable architecture allows reusable stimulus and acquisition sequences, while the -3 grade supports demanding timing paths. The listed industrial temperature range is appropriate for controlled indoor test environments but does not by itself establish aerospace qualification. For deployment near engines, aircraft, or other extreme-temperature locations, perform an additional environmental and reliability assessment or select a specifically qualified device.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ XC6SLX100-3FG484I — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | XC6SLX100-3FG484C | XC6SLX100-2FG484I | XC6SLX100-2FG484C | XC6SLX100-2FGG484I | XC6SLX100-2FGG484C |
|---|---|---|---|---|---|---|
| Package | CSBGA-484, 19 mm x 19 mm, 0.80 mm pitch | CSBGA-484 | CSBGA-484 | CSBGA-484 | CSBGA-484 | CSBGA-484 |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Spartan-6 LX FPGA | Spartan-6 LX FPGA | Spartan-6 LX FPGA | Spartan-6 LX FPGA | Spartan-6 LX FPGA | Spartan-6 LX FPGA |
| Speed Grade | -3 | -3 | -2 | -2 | -2 | -2 |
| Temperature Suffix | I | C | I | C | I | C |
| Pin Count | 484 pins | 484 pins | 484 pins | 484 pins | 484 pins | 484 pins |
جیاکەرەوە سەرەکییەکان
- Higher performance speed grade (بەراورد بەXC6SLX100-2FG484I)
- Industrial temperature designation (بەراورد بەXC6SLX100-3FG484C)
- Same-footprint reuse within the Spartan-6 LX family (بەراورد بەXC6SLX100-2FGG484I)
تێبینییەکانی دیزاین
Use the AMD Spartan-6 package files as the authority for the CSBGA-484 land pattern and via geometry. At a 0.80 mm pitch, escape routing is the primary layout constraint; preserve the recommended power, ground, and signal-via arrangement and avoid changing pad or via definitions without running the fabricator's assembly-capability review. Place decoupling close to the relevant supply balls and provide uninterrupted ground-plane paths beneath the device.
Do not evaluate thermal performance from package size alone. Estimate the design's dynamic and static FPGA power, include power loss in the regulators and I/O drivers, and calculate junction temperature with the actual PCB copper and airflow. The 19 mm by 19 mm CSBGA can spread heat effectively, but high utilization, I/O activity, and neighboring heat sources may still require thermal vias, a solid copper plane, or forced airflow.
Reserve clock inputs for low-noise routing, provide clean configuration sequencing, and constrain every high-speed interface according to its output impedance and expected receiver loading. Pay particular attention to external-memory routing through a dense escape region and to simultaneous-switching noise from I/O banks. Validate timing and power integrity with the final stack-up, component placement, package model, and intended operating temperature.
Do not treat FG and FGG ordering codes as interchangeable without checking the manufacturer ordering guide and package documentation. Likewise, changing -3 to -2 can invalidate a previously approved timing margin, while changing I to C can alter the permitted environmental range. For every proposed alternative, compare the complete ordering code, 484-ball pinout, speed grade, temperature class, lifecycle status, and design-tool support before substitution.
زانیاری پابەندبوون
The device directory identifies RoHS status as non-compliant, while the package description states lead-free. REACH, halogen-free status, and conflict-minerals status are not established.