XC6SLX4-2CPG196I - 3840-Cell Spartan-6 LX FPGA | AMD
MPN: XC6SLX4-2CPG196I ✓ چالاکXC6SLX4-2CPG196I گشتی
An FPGA is a semiconductor whose digital function is configured after manufacture through programmable logic, block RAM, digital signal processing resources, and I/O. Within the product hierarchy, the XC6SLX4 belongs to the Spartan-6 LX FPGA family, which sits between fixed-function logic devices and higher-density programmable systems. Its 3840 logic cells make it suitable for control logic, communication bridges, instrumentation, industrial automation, embedded video processing, and general-purpose parallel processing.
The XC6SLX4-2CPG196I provides 106 I/O, 300 configurable logic blocks, 3840 logic cells, a 1.2 V core voltage, and 45 nm CMOS fabrication technology. The -2 device designation identifies its speed grade, while the I suffix identifies the industrial temperature grade. These options make the MPN suitable for designs requiring a defined industrial temperature qualification rather than the commercial-temperature version.
Spartan-6 devices integrate configurable logic with block RAM, DSP resources, clock-management functions, and multi-gigabit transceivers. That combination allows designers to implement parallel datapaths, protocol state machines, control systems, and signal processing in a programmable device. Exact RAM, DSP, transceiver, voltage, and timing values were not supplied in the retrieved data and must be confirmed in the manufacturer datasheet before final design release.
Typical applications include industrial factory automation, sensor aggregation, low-speed and medium-speed communication gateways, test and measurement instruments, embedded control systems, and compact edge-processing nodes. The 106 I/O count supports interfaces to sensors, converters, memories, transceivers, and human-interface circuitry, while the 3840 logic cells allow parallel algorithms and control functions to coexist.
PCB design should use the AMD Spartan-6 package pinout files for the 196-CSBGA footprint and verify power, ground, configuration, clock, and transceiver connections before layout release. Because the 0.5 mm-pitch package is assembly-sensitive, land pattern, solder-mask, stencil, reflow, and via-in-pad decisions should follow the applicable AMD package guidance.
This page consolidates the verified device identity, package details, source links, commercial availability information, and same-family replacement analysis. It also distinguishes confirmed facts from parameters that remain to be checked in the manufacturer datasheet, helping engineers avoid assuming unverified FPGA resource or timing specifications.
جێگرەوەکانی جێگۆڕکێ بۆ XC6SLX4-2CPG196I — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ XC6SLX4-2CPG196I (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Logic Cells, Package, Speed Grade, Device Type, RoHS Status.
XC6SLX4-2CPG196C
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC6SLX4-2CPG196I زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | Spartan-6 LX field-programmable gate array (FPGA) |
| Logic Cells | 3840 cells |
| Configurable Logic Blocks | 300 CLBs |
| I/O Count | 106 I/O |
| Stated Performance Figure | 667 MHz |
| Process Technology | 45 nm CMOS |
| Core Supply Voltage | 1.2 V |
| پاکێج | 196-pin CSBGA, 8 mm x 8 mm, 0.5 mm pitch |
| Package Designation | 196-TFBGA, CSBGA |
| Speed Grade | -2 |
| Temperature Grade | Industrial grade |
| Programming Technology | SRAM-based FPGA configuration |
| دۆخی RoHS | Compliant |
| Lead-Free Status | Lead free |
| جۆری دامەزراندن | Surface mount |
ڕێنمایی ڕێکخستنی پینی XC6SLX4-2CPG196I 196-tfbga, csbga
ڕێکخستنی پین بۆ XC6SLX4-2CPG196I (پاکێجی 196-tfbga, csbga). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ XC6SLX4-2CPG196I.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
XC6SLX4-2CPG196I گونجاوە بۆ 6 بەکارھێنانs: Industrial Automation and Factory Control, Sensor Aggregation and Data Acquisition, Communication Gateway and Protocol Bridge, Test and Measurement Instrumentation, Embedded Edge Processing, Medical and Diagnostic Equipment Control.
Industrial Automation and Factory Control
The XC6SLX4-2CPG196I fits factory-control logic because it combines 3840 logic cells, 300 configurable logic blocks, and 106 I/O with an industrial temperature designation. It can implement sequencers, machine-state controllers, interlocks, sensor aggregation, actuator-command logic, and communication protocols in one programmable device. The 1.2 V core supply and 45 nm CMOS technology support a compact implementation, while the -2 speed grade provides a defined timing class. During design review, engineers should confirm exact I/O standards, timing limits, power consumption, and startup behavior against the manufacturer datasheet before approving it for factory equipment.
پێشنیارکراو
Sensor Aggregation and Data Acquisition
The XC6SLX4-2CPG196I is suitable for consolidating multiple sensor channels because its 106 I/O provide substantial parallel connectivity and its 3840 logic cells can implement acquisition sequencing, filtering, calibration state, and data packing. Designers can place programmable logic close to converters, switches, and digital sensors while using the 1.2 V core supply efficiently. The verified records do not specify block RAM, DSP resources, or exact I/O performance, so those values must be confirmed before selecting the device for high-rate conversion. This limitation is especially important when the acquisition algorithm exceeds basic parallel logic.
پێشنیارکراو
Communication Gateway and Protocol Bridge
The XC6SLX4-2CPG196I can serve as a compact communication gateway when a system must bridge serial interfaces, parallel buses, and control messages. Its 300 configurable logic blocks and 106 I/O provide resources for framing, CRC generation, buffering, state machines, and interface conversion, while the 667 MHz stated performance figure belongs to the -2 device class identified in the verified comparison. Exact transceiver count, supported protocols, and maximum interface rates were not provided. Engineers should therefore match the selected Spartan-6 configuration to the required line rates and rerun timing closure for the actual clocking plan.
پێشنیارکراو
Test and Measurement Instrumentation
The XC6SLX4-2CPG196I is appropriate for programmable test and measurement logic where sequencing, pattern generation, acquisition control, and instrument communication must operate concurrently. Its 3840 cells and 106 I/O can support parallel control paths and multiple instrument-facing interfaces without relying on a fixed-function controller alone. The industrial-grade suffix is useful where ambient conditions exceed commercial limits, although the precise operating range must be confirmed. Timing-sensitive instrumentation should use the -2 grade constraints, verify all clock domains in post-route timing analysis, and account for the 196-CSBGA assembly tolerances.
پێشنیارکراو
Embedded Edge Processing
The XC6SLX4-2CPG196I offers a programmable logic platform for compact edge nodes that combine local decision-making, peripheral control, and protocol handling. Its 300 CLBs and 3840 logic cells can support parallel pipelines and control logic while its 106 I/O connects to sensors, memory, and communications devices. The verified data identifies a 1.2 V core voltage and 45 nm CMOS process but does not provide RAM or DSP capacity, making resource availability the key selection check. Engineers should map the algorithm into the available resources and confirm whether block RAM or dedicated DSP resources are required.
پێشنیارکراو
Medical and Diagnostic Equipment Control
The XC6SLX4-2CPG196I can support control and monitoring functions in diagnostic equipment when its logic, I/O, timing, and environmental requirements are suitable. The device provides 3840 logic cells, 300 CLBs, and 106 I/O for sensor interfaces, workflow logic, human-interface control, and internal communication. Its industrial temperature designation may support controlled industrial environments, but it does not by itself establish medical certification or suitability for patient-contact circuits. Verification must include applicable medical standards, electrical isolation, functional safety, EMC, and regulatory requirements not addressed by the supplied component data.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ XC6SLX4-2CPG196I — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | XC6SLX4-2CPG196C |
|---|---|---|
| Brand | Advanced Micro Devices, Inc. | Advanced Micro Devices, Inc. |
| Package | 196-CSBGA (8 mm x 8 mm) | 196-CSBGA - same package |
| Logic Cells | 3840 cells | 3840 cells |
| Configurable Logic Blocks | 300 CLBs | 300 CLBs |
| I/O Count | 106 I/O | 106 I/O |
| Stated Performance Figure | 667 MHz | 667 MHz |
| Process Technology | 45 nm CMOS | 45 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V |
| Speed Grade | -2 | -2 |
| Temperature Grade | Industrial grade | Commercial grade |
جیاکەرەوە سەرەکییەکان
- Industrial temperature qualification (بەراورد بەXC6SLX4-2CPG196C)
- Identical displayed electrical resource ratings (بەراورد بەXC6SLX4-2CPG196C)
- Common 196-CSBGA footprint (بەراورد بەXC6SLX4-2CPG196C)
تێبینییەکانی دیزاین
Use the current AMD Spartan-6 package drawing and ASCII pinout file for the 196-CSBGA footprint before releasing the PCB. The verified package is 8 mm x 8 mm with a 0.5 mm pitch, making land pattern, solder-mask-defined or non-wettable pad design, stencil aperture, and assembly tolerances critical. Confirm the selected PCB build process against AMD package guidelines and do not infer ball assignments from a generic BGA drawing. A 196-pin pinout cannot be reconstructed safely from the search snippets alone.
Plan the FPGA power tree from the manufacturer's recommended supply topology instead of treating the 1.2 V core value as the complete power requirement. Configuration, auxiliary rails, I/O supplies, and internal activity each affect total current. The supplied data does not include current limits, sequencing, startup current, or rail tolerances, so those values must be obtained from the manufacturer datasheet. Validate regulator headroom and transient response against estimated utilization, and include thermal margin for the selected 196-CSBGA assembly environment.
Assign clocking and high-speed interfaces deliberately, then validate them with post-route timing analysis for the -2 speed grade. The verified 667 MHz figure is a stated performance value, not a guarantee that every routed design path or I/O interface closes at that rate. Use the appropriate board-level constraints for each clock domain, control impedance through package escape routing, and account for BGA breakout and power-supply integrity. Interface-specific timing limits must come from the complete AMD documentation because they were not present in the retrieved data.
Do not substitute XC6SLX4-2CPG196C solely because it has the same package and the displayed 667 MHz performance figure. The verified difference is temperature grade: the target is industrial, while the candidate is commercial. Also avoid treating the cross-reference search's LatticeECP3-70, Altera Cyclone IV EP4CE6, and Microsemi SmartFusion2 M2S050 suggestions as drop-in parts; the supplied evidence does not establish matching 196-CSBGA pinouts. Cross-vendor migration requires a board redesign and full resource, tool, firmware, and timing validation.
زانیاری پابەندبوون
The verified product record states lead free and RoHS compliant. No explicit REACH, halogen-free, conflict-minerals, or AEC-Q100 evidence was provided. The industrial temperature suffix does not itself imply AEC-Q100 qualification.