XC6SLX4-3CSG225C - 3,840-Cell Spartan-6 LX FPGA | AMD
MPN: XC6SLX4-3CSG225C ✓ چالاکXC6SLX4-3CSG225C گشتی
A field-programmable gate array is a semiconductor in which digital logic, interfaces, memory blocks, and signal-processing functions are configured after fabrication. FPGAs occupy the programmable-logic hierarchy between fixed-function logic devices and application-specific integrated circuits, making them useful when design requirements evolve faster than ASIC mask set economics allow. The Spartan-6 LX family targets compact, cost-sensitive embedded and industrial logic systems.
The XC6SLX4-3CSG225C combines 3,840 logic cells with 8 DSP slices, allowing parallel arithmetic, filtering, and control functions to share one device. Its 216 Kbit of block RAM supports buffering, packet storage, and data-retention tasks without external memory. The 132 user I/Os provide substantial board-level connectivity, while the -3 speed grade supports operation up to 1.08 GHz under the specified device conditions.
The -3 ordering code identifies the performance class, while the C suffix identifies the commercial temperature grade and CSG225 identifies the 225-ball CSPBGA package. This part is designed around 45 nm CMOS technology and a nominal 1.2 V core supply, with additional supply rails required for configuration and bank-specific I/O standards. Its architecture is suited to parallel data acquisition, protocol bridging, embedded control, and custom accelerator implementations.
Typical uses include industrial automation, IoT edge control, embedded instrumentation, and compact communication systems. A designer can assign parallel I/O for sensors and actuators, use DSP slices for filtering or transforms, and use block RAM for local buffering. The 13 mm by 13 mm CSBGA also supports dense designs where a smaller package would compromise routing resources or thermal performance.
The main design consideration is that BGA assembly requires a multilayer PCB, careful escape routing, controlled impedance, and adequate power-plane geometry. The 1.2 V core rail must be supplied cleanly, while configuration, I/O, and auxiliary voltage requirements must follow the Spartan-6 power architecture. Thermal design should be validated for the actual utilization and ambient temperature rather than inferred from device type alone.
This page combines verified distributor pricing, same-package Spartan-6 alternatives, parameter comparisons, and practical design guidance. It distinguishes electrically similar devices from true drop-in choices, helping engineers evaluate replacement risk without treating a shared package as proof of identical timing, temperature capability, or lifecycle status.
جێگرەوەکانی جێگۆڕکێ بۆ XC6SLX4-3CSG225C — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ XC6SLX4-3CSG225C (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Device Type, Logic Cells, Speed Grade, Temperature Grade.
XC6SLX4-2CSG225C
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →XC6SLX4-3CSG225I
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →XC6SLX4-3CSG225E
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
XC6SLX4-2CSG225I
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →XC6SLX4-1CSG225C
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
XC6SLX4-3CSG225C زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | Spartan-6 LX field-programmable gate array (FPGA) |
| Logic Cells | 3,840 cells |
| User I/O | 132 I/Os |
| Block RAM | 216 Kbit |
| DSP Slices | 8 slices |
| Process Technology | 45 nm CMOS |
| Core Supply Voltage | 1.2 V nominal |
| Speed Grade | -3 |
| زۆرترین فرێکوێنسیی کاتژمێر | 1.08 GHz |
| پلەی گەرمیی کارکردن | 0 °C to 85 °C |
| پاکێج | 225-ball CSBGA, 13 mm x 13 mm |
| جۆری دامەزراندن | Surface mount |
| Terminal Type | Ball |
| Total Terminals | 225 terminals |
| Internal Operating Voltage Range | 1.14 V to 1.26 V |
| Extended Temperature Range | -40 °C to 100 °C |
| دۆخی RoHS | Compliant |
ڕێنمایی ڕێکخستنی پینی XC6SLX4-3CSG225C 225-ball csbga, 13 mm x 13 mm
ڕێکخستنی پین بۆ XC6SLX4-3CSG225C (پاکێجی 225-ball csbga, 13 mm x 13 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ XC6SLX4-3CSG225C.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
XC6SLX4-3CSG225C گونجاوە بۆ 6 بەکارھێنانs: Industrial Automation Controller, IoT Edge Signal Processing, Embedded Data Acquisition, Communication Protocol Bridge, Audio Processing, Custom Accelerator.
Industrial Automation Controller
The XC6SLX4-3CSG225C fits compact industrial automation controllers because its 3,840 logic cells can combine sequencing, communications, and supervisory control in one programmable-logic device. Its 132 user I/Os provide connections for digital sensors, actuator outputs, status indicators, and industrial bus transceivers. The -3 grade offers a listed 1.08 GHz speed class for time-sensitive control logic. Because the C suffix supports 0 °C to 85 °C, it suits controlled indoor equipment; colder or hotter installations should use an industrial-grade suffix. A practical design would map safety or timing-critical logic into the FPGA while handling slower supervisory tasks in firmware.
پێشنیارکراو
IoT Edge Signal Processing
The XC6SLX4-3CSG225C is useful for IoT edge nodes that must filter, frame, or compress sensor data before forwarding it to a network processor. Its 8 DSP slices support parallel arithmetic and fixed-point signal-processing pipelines, while 216 Kbit of block RAM provides local packet buffering and data staging. The 132 I/Os leave sufficient connectivity for sensor interfaces, status control, and external transceivers. At the listed 1.08 GHz -3 performance class, the device offers more timing margin than the -2 Spartan-6 option. Designers should still constrain clocking and I/O standards to the supported bank configuration and validate power consumption against expected edge-node activity.
پێشنیارکراو
Embedded Data Acquisition
The XC6SLX4-3CSG225C can implement parallel data-acquisition logic when multiple sensors or converters require synchronized sampling and real-time preprocessing. The 132 user I/Os allow direct connection to digital sensors, counters, and capture interfaces, while the 8 DSP slices can execute filters or scaling operations. Its 3,840 logic cells are appropriate for control, triggering, buffering, and interface state machines rather than very large processor systems. The -3 grade's 1.08 GHz rating supports demanding clock domains, but all timing must be constrained against the actual speed grade. Commercial operation from 0 °C to 85 °C is suitable for many indoor instruments.
پێشنیارکراو
Communication Protocol Bridge
The XC6SLX4-3CSG225C is suitable for a protocol-conversion bridge that receives one serial format and emits another while adding buffering or framing logic. Its 3,840 logic cells support parallel finite-state machines and width converters, 216 Kbit of block RAM can absorb packet differences, and 132 I/Os simplify connections to transceivers and logic analyzers. The listed 1.08 GHz -3 performance class provides additional timing margin for parallel datapaths. Designers should account for transceiver direction control, clock-domain crossings, and protocol-specific latency. The device remains in the Spartan-6 LX family, allowing familiar FPGA workflows and tool support during implementation.
پێشنیارکراو
Audio Processing
The XC6SLX4-3CSG225C can implement modest audio acquisition, filtering, or routing functions where deterministic parallel processing is valuable. The 8 DSP slices are suited to multiplication, accumulation, interpolation, and filtering stages, while 216 Kbit of block RAM can store samples or intermediate coefficients. Its 132 I/Os allow digital audio interfaces and control signals to connect directly to the programmable logic. The -3 grade supports up to 1.08 GHz under the listed device conditions, useful for multichannel sample pipelines. Audio system design must still account for clock jitter, supported I/O standards, and deterministic latency; those board-level details are not established by the supplied summary data.
پێشنیارکراو
Custom Accelerator
The XC6SLX4-3CSG225C is appropriate for a small custom accelerator that performs fixed-point filtering, counting, encryption, or bit-stream manipulation before a host processor handles higher-level work. Its 8 DSP slices and 3,840 logic cells provide parallel hardware resources without requiring an ASIC, while 216 Kbit of block RAM supports local working sets. The 1.08 GHz -3 speed class offers useful throughput for pipelines, and the 225-ball package keeps the device reasonably compact at 13 mm by 13 mm. For a reliable accelerator implementation, engineers should define fixed-point behavior, pipeline latency, memory bandwidth, and host-interface timing before assigning the logic to the FPGA.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ XC6SLX4-3CSG225C — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | XC6SLX4-2CSG225C | XC6SLX4-3CSG225I | XC6SLX4-3CSG225E | XC6SLX4-2CSG225I | XC6SLX4-1CSG225C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 225-ball CSBGA | 225-ball CSBGA | 225-ball CSBGA | 225-ball CSBGA | 225-ball CSBGA | 225-ball CSBGA |
| Device Family | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX |
| Logic Cells | 3,840 cells | 3,840 cells | 3,840 cells | 3,840 cells | 3,840 cells | 3,840 cells |
| User I/O | 132 I/Os | 132 I/Os | 132 I/Os | 132 I/Os | 132 I/Os | 132 I/Os |
| Block RAM | 216 Kbit | 216 Kbit | 216 Kbit | 216 Kbit | 216 Kbit | 216 Kbit |
| DSP Slices | 8 slices | 8 slices | 8 slices | 8 slices | 8 slices | 8 slices |
| Process Technology | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS |
| Core Supply Voltage | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal |
| Speed Grade | -3, 1.08 GHz | -2 | -3, 1.08 GHz | -3, 1.08 GHz | -2 | -1 |
| Temperature Grade | Commercial, 0 °C to 85 °C | Commercial, 0 °C to 85 °C | Industrial, -40 °C to 100 °C | Extended temperature | Industrial, -40 °C to 100 °C | Commercial, 0 °C to 85 °C |
جیاکەرەوە سەرەکییەکان
- Higher timing class within the same pin-compatible Spartan-6 LX footprint (بەراورد بەXC6SLX4-2CSG225C)
- Commercial-temperature target matched to controlled indoor equipment (بەراورد بەXC6SLX4-3CSG225I)
- Complete resource set for compact parallel signal processing (بەراورد بەXC6SLX4-1CSG225C)
تێبینییەکانی دیزاین
Treat the CSBGA footprint as a multilayer-board design rather than a conventional perimeter-package layout. Route every power and ground ball directly to suitable planes, minimize loop area for the 1.2 V core supply, and use the official AMD package files to define all 225 balls. Verify the PCB stack-up, via geometry, solder-mask definition, and assembly stencil against the package drawing before fabrication.
Separate the 1.2 V core rail from the auxiliary configuration and I/O supplies, following the AMD Spartan-6 power architecture. Decoupling values, regulator selection, sequencing, and startup behavior are not present in the supplied excerpts, so engineers must obtain those values from the family documentation. Use the exact target speed grade during timing analysis rather than assuming that a lower-cost board variant provides equivalent margin.
Do not estimate junction temperature from the 1.08 GHz clock rating alone. Actual dissipation depends on logic utilization, DSP and block-RAM activity, I/O switching, the selected speed grade, and the board's thermal path. Obtain the verified package thermal-resistance and power-data values, then calculate worst-case activity at the actual ambient temperature. Preserve uninterrupted copper beneath the BGA for heat spreading.
A shared 225-ball package does not make every Spartan-6 LX ordering code an equivalent drop-in. The speed suffix changes timing margins, while the temperature suffix changes environmental coverage. Before substitution, recompile the design for the exact replacement MPN, confirm every pin constraint, verify configuration behavior, and rerun static timing and power analysis. The -2 and -1 alternatives should never be substituted without an explicit timing review.
Assign high-fanout or externally exposed signals to pins whose supported I/O standard and voltage match the board. The supplied data does not enumerate bank-level I/O capabilities, differential pairs, or configuration pins, so obtain the official 225-CSBGA pinout and device-specific I/O tables before routing. Use short escape paths, a continuous reference plane, and controlled-impedance geometry for external and inter-device interfaces.
زانیاری پابەندبوون
RoHS compliance is explicitly shown in the verified JLCPCB product result. The supplied data does not state REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status for the exact MPN.