XC6SLX4-3TQG144I - 3840-LC Spartan-6 FPGA | AMD
MPN: XC6SLX4-3TQG144I ✓ چالاکXC6SLX4-3TQG144I گشتی
A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior can be configured after fabrication. The Spartan-6 LX FPGA family belongs to the hierarchy of FPGA, programmable logic device, digital semiconductor, and embedded programmable logic. Unlike a fixed-function application-specific integrated circuit, an FPGA supports design changes, parallel signal processing, hardware acceleration, and interface adaptation without requiring a new silicon mask.
The XC6SLX4-3TQG144I provides 600 adaptive logic modules, 3,840 logic cells, 102 user I/Os, and 221,184 bits of block RAM. Its 862 MHz maximum frequency supports demanding control logic, communication interfaces, and parallel data-processing functions. The 144-LQFP package provides a large pin count relative to smaller FPGA packages, allowing more external memory, transceiver, control, and general-purpose I/O connections. Pb and Pb-free package options are available within the family, although the exact ordering-code status of this MPN should be confirmed with AMD.
The device combines configurable logic, block RAM, dedicated digital clocking resources, programmable I/O, and on-chip support features within one integrated package. Its -3 speed grade is intended to provide higher timing performance than lower-numbered Spartan-6 speed grades. Because an FPGA is a programmable digital device, final performance also depends on placement, routing, clocking, I/O standards, memory interfaces, and the selected tool version; the 862 MHz figure should therefore not be interpreted as a guaranteed operating frequency for every design.
Typical uses include industrial control, networking equipment, embedded instrumentation, video interfaces, sensor processing, and communications bridges. Its 102 I/Os make it suitable for designs needing substantial external connectivity, while 221,184 bits of embedded RAM can support buffering, packet handling, data acquisition, and general-purpose state storage. The 20 x 20 mm LQFP footprint is also practical for boards that cannot accommodate very dense BGA packages.
A key design consideration is the device's relatively low logic-cell count compared with larger Spartan-6 devices. Designs requiring multiple high-speed interfaces, large frame buffers, or substantial parallel processing may need a larger FPGA. Engineers should also verify speed-grade timing against the slowest clock domain and use the AMD Spartan-6 package pinout files when assigning all 144 package pins.
This product page consolidates verified distributor specifications, a complete same-package alternative set, practical application guidance, and design cautions that are not presented together in a single manufacturer datasheet. It is intended to accelerate component selection while preserving traceability to the provided manufacturer and distributor sources.
جێگرەوەکانی جێگۆڕکێ بۆ XC6SLX4-3TQG144I — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ XC6SLX4-3TQG144I (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Speed Grade, Process Technology, Block RAM, Logic Cells.
XC6SLX4-3TQG144C
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC6SLX4-2TQG144I
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC6SLX4-2TQG144C
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC6SLX4-1TQG144I
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
XC6SLX4-1TQG144C
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
XC6SLX4-3TQG144I زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | Spartan-6 LX field-programmable gate array (FPGA) |
| Logic Cells | 3,840 cells |
| Adaptive Logic Modules | 600 ALMs |
| Embedded Memory | 221,184 bits (216 Kbit) |
| User I/O | 102 I/Os |
| Maximum Frequency | 862 MHz |
| Process Technology | 45 nm low-power process |
| پاکێج | 144-pin LQFP, 20 x 20 mm |
| جۆری دامەزراندن | Surface mount |
| Temperature Grade | Industrial |
| Speed Grade | -3 performance grade |
| Lead-Free Availability | Pb-free option available in the Spartan-6 package family |
| دۆخی RoHS | Compliant |
| Memory Controller Support | No dedicated memory controller in XC6SLX4 |
ڕێنمایی ڕێکخستنی پینی XC6SLX4-3TQG144I 144-pin lqfp, 20 x 20 mm
ڕێکخستنی پین بۆ XC6SLX4-3TQG144I (پاکێجی 144-pin lqfp, 20 x 20 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ XC6SLX4-3TQG144I.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
XC6SLX4-3TQG144I گونجاوە بۆ 6 بەکارھێنانs: Industrial Control Logic, Industrial Ethernet Interface, CAN Gateway and Protocol Conversion, USB-to-Custom Interface Bridge, Video Timing and Interface Conversion, Data Acquisition and Signal Processing.
Industrial Control Logic
The XC6SLX4-3TQG144I fits industrial controllers that need deterministic parallel logic, multiple external interfaces, and local data buffering without a higher-cost FPGA. Its 3,840 logic cells and 600 ALMs can implement control state machines, interlocks, counters, and communication logic, while 221,184 bits of block RAM support history buffers and sampled-data storage. The 102 user I/Os provide connections for sensors, actuators, encoders, and digital buses. The industrial temperature designation supports industrial environments, although designers must confirm the exact numerical limits and timing against the manufacturer data sheet.
پێشنیارکراو
Industrial Ethernet Interface
The XC6SLX4-3TQG144I can serve as a hardware-assisted Ethernet or communications controller when deterministic packet handling, parallel bus arbitration, and custom protocol logic are required. Its 3,840 logic cells are suitable for finite-state machines and frame-processing pipelines, while 102 I/Os accommodate external PHY, status, and host-bus connections. The 862 MHz maximum device frequency provides substantial timing headroom for properly constrained logic. Block RAM can be partitioned into receive, transmit, and status queues, reducing dependence on external memory for modest networking workloads.
پێشنیارکراو
CAN Gateway and Protocol Conversion
The XC6SLX4-3TQG144I is suitable for a CAN gateway that bridges CAN traffic to another fieldbus or host interface. The FPGA can execute protocol conversion, filtering, timestamping, and diagnostic logic concurrently because its programmable resources are not tied to a fixed instruction set. Up to 102 I/Os allow connection to CAN transceivers, logic-level processors, and status or configuration signals. The 221,184-bit block RAM can buffer frames, while the -3 grade supports demanding clocked filtering and serial-to-parallel data handling.
پێشنیارکراو
USB-to-Custom Interface Bridge
The XC6SLX4-3TQG144I can implement a USB-to-custom peripheral bridge when a product needs protocol conversion, test instrumentation, or legacy interface support beyond a fixed-function USB controller. Its 3,840 logic cells and 600 ALMs can support USB endpoint logic, packet descriptors, and custom data processing, while the 102 I/Os expose high-speed, control, and general-purpose signals. The 20 x 20 mm LQFP package is relatively easy to route and inspect compared with a fine-pitch BGA. A companion USB-to-UART bridge may handle low-speed management traffic while the FPGA serves the data path.
پێشنیارکراو
Video Timing and Interface Conversion
The XC6SLX4-3TQG144I can perform video timing generation, pixel-format conversion, test-pattern generation, or interface adaptation in compact embedded systems. Its 3,840 logic cells support parallel timing generators and control state machines, and 102 I/Os provide enough external connectivity for video data, synchronization, and control signals. Block RAM is useful for line buffers, lookup tables, and compact frame storage where full-frame external memory is unnecessary. The -3 performance grade and 862 MHz maximum frequency support demanding clocked pipelines when design constraints are applied correctly.
پێشنیارکراو
Data Acquisition and Signal Processing
The XC6SLX4-3TQG144I is appropriate for parallel data acquisition, digital filtering, decoding, and sensor-data preprocessing. Its programmable logic can implement multiple digital filters or decoders concurrently, and 221,184 bits of embedded memory can buffer samples or hold coefficient tables. With 102 I/Os, the device can accept parallel ADC or sensor data, coordinate captures, and present processed results to an MCU or memory. The 862 MHz maximum frequency enables high-rate clocked pipelines, though achievable sample rate depends on I/O standards, timing constraints, resource utilization, and board-level signal integrity.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ XC6SLX4-3TQG144I — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | XC6SLX4-3TQG144C | XC6SLX4-2TQG144I | XC6SLX4-2TQG144C | XC6SLX4-1TQG144I | XC6SLX4-1TQG144C |
|---|---|---|---|---|---|---|
| Package | LQFP-144 (20x20 mm) | LQFP-144 (20x20 mm) | LQFP-144 (20x20 mm) | LQFP-144 (20x20 mm) | LQFP-144 (20x20 mm) | LQFP-144 (20x20 mm) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX |
| Logic Cells | 3,840 cells | 3,840 cells | 3,840 cells | 3,840 cells | 3,840 cells | 3,840 cells |
| Adaptive Logic Modules | 600 ALMs | 600 ALMs | 600 ALMs | 600 ALMs | 600 ALMs | 600 ALMs |
| Embedded Memory | 221,184 bits (216 Kbit) | 221,184 bits (216 Kbit) | 221,184 bits (216 Kbit) | 221,184 bits (216 Kbit) | 221,184 bits (216 Kbit) | 221,184 bits (216 Kbit) |
| User I/O | 102 I/Os | 102 I/Os | 102 I/Os | 102 I/Os | 102 I/Os | 102 I/Os |
| Speed Grade | -3 | -3 | -2 | -2 | -1 | -1 |
| Temperature Grade | Industrial (I) | Commercial (C) | Industrial (I) | Commercial (C) | Industrial (I) | Commercial (C) |
جیاکەرەوە سەرەکییەکان
- Retains the highest listed speed grade among the drop-in alternatives (بەراورد بەXC6SLX4-2TQG144I)
- Provides industrial temperature-grade sourcing while preserving the -3 grade (بەراورد بەXC6SLX4-3TQG144C)
- Combines 102 I/Os with 3,840 logic cells in an inspectable surface-mount package (بەراورد بەXC6SLX4-2TQG144C)
- Offers the same documented memory configuration as the closest C-grade substitute (بەراورد بەXC6SLX4-1TQG144C)
تێبینییەکانی دیزاین
Use AMD's official Spartan-6 package device pinout files before assigning the 144 LQFP pins; the supplied verified data confirms that these ASCII TXT files are available. Treat power, ground, configuration, clock, and user I/O assignments independently, and do not infer unverified pin names from package numbering. Because the LQFP has closely spaced leads on all four sides, check footprint dimensions, paste-land geometry, solder mask clearance, and assembly capability against the manufacturer package drawing.
A lower-numbered speed-grade substitute can fit the same PCB but still fail timing closure. After replacing XC6SLX4-3TQG144I with an XC6SLX4-2 or XC6SLX4-1 variant, regenerate timing reports, review all clock-domain crossings, and test worst-case I/O timing under the intended temperature and voltage conditions. Also confirm whether the original design required the I industrial grade; a C-grade part may share the footprint but not the environmental requirement.
Do not power the XC6SLX4-3TQG144I until the exact core and I/O voltage requirements have been obtained from the AMD Spartan-6 data sheet; those numerical limits were not present in the supplied verified excerpts. Follow the manufacturer power-supply topology, recommended decoupling capacitors, and sequencing requirements. Validate startup and shutdown behavior in hardware because incorrect rail ordering can violate device limits even when the nominal voltages appear correct.
The 862 MHz figure is a device capability rather than a guaranteed PCB operating rate. Apply timing constraints, account for board skew and I/O standards, and use the manufacturer's IBIS or equivalent models when available. Route clocks as controlled-length or appropriately terminated networks, keep high-speed nets away from noisy power converters, and validate eye margin with a representative board rather than relying only on FPGA timing reports.
زانیاری پابەندبوون
The supplied Xecor comparison identifies the Spartan-6 series as RoHS-compliant, while the provided Xilinx-hosted document mirror states that Pb and Pb-free package options are available within the family. Exact lead-free status for this specific ordering code, REACH status, halogen-free status, conflict-minerals status, and automotive qualification were not stated.