XC7Z007S-2CLG225E Zynq-7000 SoC 23K Cells 766MHz | AMD
MPN: XC7Z007S-2CLG225E ✓ چالاکXC7Z007S-2CLG225E گشتی
An SoC such as the Zynq-7000 sits in the hierarchy above a microcontroller and above a discrete FPGA: it is a heterogeneous programmable system on chip that embeds a hard processor system (PS) and programmable logic (PL) in one silicon die, sharing memory controllers, DDR interfaces, and I/O resources between them. Rather than a microcontroller with fixed peripherals, the PL portion can be reconfigured at runtime for custom datapaths, hardware accelerators, or protocol engines, while the Cortex-A9 core runs Linux, bare-metal RTOS, or standalone firmware.
Key features of this device include 23K logic cells in the Artix-7 fabric, a 766 MHz Cortex-A9 core, 54 user I/O pins, and four external ADC signal pairs (differential inputs) in the CLG225 package variant. The processing system adds DDR2/DDR3/LPDDR2 memory controller support, USB 2.0, Ethernet MAC, UART, SPI, and I2C peripherals, plus hard MAC blocks for Gigabit Ethernet and dedicated video processing engines. The device is built on a 28 nm process, which is what allows the PS and PL to share a common power and clocking architecture.
Architecturally, the dual-plane design matters: the PS can boot from external flash and configure the PL via the FPGA configuration logic, so the programmable logic is available immediately after power-up without a host CPU. In a typical design the Cortex-A9 handles network stack, control plane, and user application, while the 23K logic cells implement custom video pipelines, high-speed capture, or industrial I/O conditioning running concurrently.
Typical applications include industrial Ethernet gateways, machine vision and camera head modules, Z-Wave and Zigbee radio plus FPGA logic co-designs, set-top and broadcast data paths, medical monitoring stations, and low-cost embedded Linux appliances. The CLG225 package keeps the board footprint small enough for compact modules while still exposing 54 user I/Os and differential ADC pairs.
When laying out the board, treat the CLG225 as a fine-pitch BGA: 225 balls on a 0.8 mm pitch in a 13 x 13 mm body demand careful escape-routing, and the package needs a via-in-pad-capable board stack-up. Follow the AMD Zynq-7000 package pinout specification UG865 for the authoritative ball map and the UG585 technical reference manual for the CLG225-specific ADC and power-up details.
This page consolidates the device specification, the Zynq-7000 CLG225-specific differences between speed and temperature grades, drop-in same-package alternatives, and practical design guidance for decoupling, clocking, and BGA layout that you will not find in a single distributor listing.
جێگرەوەکانی جێگۆڕکێ بۆ XC7Z007S-2CLG225E — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ XC7Z007S-2CLG225E (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Device Type, Package, Processor Core, Debug Support, External ADC Signal Pairs.
XC7Z007S-2CLG225I
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC7Z007S-1CLG225C
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC7Z007S-1CLG225I
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →XC7Z007S-1CLG225E
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
XC7Z007S-2CLG225E زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | Zynq-7000 SoC (single-core ARM Cortex-A9 + Artix-7 FPGA) |
| Processor Core | ARM Cortex-A9 MPCore, single core |
| Processor Clock Speed | 766 MHz |
| FPGA Logic Cells | 23K logic cells (Artix-7 fabric) |
| پاکێج | 225-CSPBGA (CLG225) |
| Package Body Size | 13 x 13 mm |
| Ball Pitch | 0.8 mm |
| User I/O Pins | 54 |
| External ADC Signal Pairs | 4 differential input pairs (CLG225 variant) |
| Debug Support | CoreSight |
| Process Technology | 28 nm Xilinx programmable logic |
| Speed Grade | -2 |
| Temperature Grade | Extended (industrial), -E suffix |
| Programmable Logic Architecture | Dual-plane PS/PL architecture, PL configured by the PS |
| دۆخی RoHS | Compliant (per distributor BOM listing) |
| Pinout Reference | UG865 Zynq-7000 SoC Packaging and Pinout Product Specification |
ڕێنمایی ڕێکخستنی پینی XC7Z007S-2CLG225E 13 x 13 mm
ڕێکخستنی پین بۆ XC7Z007S-2CLG225E (پاکێجی 13 x 13 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ XC7Z007S-2CLG225E.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
XC7Z007S-2CLG225E گونجاوە بۆ 6 بەکارھێنانs: Industrial IoT Gateway with Programmable I/O, Machine Vision and Camera Head Module, Embedded Linux HMI with Hardware Acceleration, Communications and Radio Baseband Co-Design, Medical and Instrumentation Data Acquisition, Secure Network Appliance and Protocol Converter.
Industrial IoT Gateway with Programmable I/O
The XC7Z007S-2CLG225E suits industrial gateways that must terminate real-world sensor signals and still run a network stack. The 23K logic cells of the Artix-7 fabric can implement custom timing, counters, and protocol bit-strobes directly in hardware, while the 766 MHz Cortex-A9 core runs the TCP/IP stack and application code. Because the CLG225 package exposes 54 user I/O pins and four external ADC differential pairs, a gateway can read isolated analog sensors without a separate ADC. The -2 speed grade and extended industrial temperature option suit factory-floor enclosures where ambient temperature exceeds commercial limits, while the single Cortex-A9 core keeps the power budget low compared with a multi-core Zynq such as the XC7Z010.
پێشنیارکراو
Machine Vision and Camera Head Module
In a compact camera head, the XC7Z007S-2CLG225E can absorb pixel-processing datapaths into the programmable logic while the Cortex-A9 core handles image control, parameter configuration, and network streaming. Running a Bayer demosaic, colour matrix, and exposure control pipeline in the 23K logic cells frees the processor from per-pixel work and keeps frame latency deterministic. The 54 user I/O pins are sufficient to drive a parallel or LVDS serial sensor interface plus a small FPGA-side frame buffer in external memory. Since the part is offered in an extended industrial temperature grade, it is suitable for camera housings exposed to variable internal temperatures, and the 13 x 13 mm CLG225 footprint keeps the head small.
پێشنیارکراو
Embedded Linux HMI with Hardware Acceleration
The XC7Z007S-2CLG225E supports compact human-machine interfaces that need a graphical Linux user interface plus dedicated hardware for latency-sensitive tasks. The Cortex-A9 MPCore core runs the Linux kernel, display stack, and touchscreen application, while the programmable logic can drive a display interface, scan a keypad matrix, or run a hardware security block such as a hash accelerator. Sharing DDR memory between the processor system and programmable logic avoids a second memory device on the board, which matters in a small panel design. The device is a natural fit for panel PC peripherals, vending machine controllers, and building access terminals where the 225-ball CSPBGA keeps the outline small.
پێشنیارکراو
Communications and Radio Baseband Co-Design
Communications equipment often needs a programmable radio baseband next to a control processor, and the XC7Z007S-2CLG225E merges both onto one die. The 23K logic cells can host symbol-rate filters, scramblers, CRC engines, or a narrowband modem front end that would otherwise burden the CPU, while the 766 MHz Cortex-A9 handles MAC layer signalling, configuration, and telemetry. The Zynq-7000 PS includes hard MAC blocks for Gigabit Ethernet, which lets a designer build a complete radio or gateway controller without an external Ethernet PHY controller. At 54 user I/O the CLG225 variant is also adequate for RF control lines and monitoring buses in small-form-factor radio modules.
پێشنیارکراو
Medical and Instrumentation Data Acquisition
Diagnostic and laboratory instruments benefit from deterministic sampling timing, which is exactly what the XC7Z007S-2CLG225E provides by splitting acquisition logic from processing. The four external ADC differential pairs of the CLG225 package can digitise several sensor channels directly, and the programmable logic can run precision triggers, windowing, and pipelined filters with fixed latency, while the Cortex-A9 core stores, timestamps, and formats the data. This split architecture also lowers CPU load, which helps extend battery life in portable analysers. The extended industrial temperature grade covers lab and bedside environments, and the small 13 x 13 mm outline suits compact bench instruments and point-of-care analysers.
پێشنیارکراو
Secure Network Appliance and Protocol Converter
Protocol converters and secure gateways benefit from a single chip that can run a hardened OS and accelerate cryptography or packet handling in programmable logic. The XC7Z007S-2CLG225E Cortex-A9 core handles TLS termination, firewall policy, and management, and the 23K logic cells can accelerate packet parsing or implement a hardware root of trust that derives session keys. Because the programmable logic can be reconfigured, the same board can support multiple protocol variants without a respin. Its single-core configuration keeps power and cost lower than a dual-core Zynq, and the CLG225 package has enough general-purpose I/O for status indicators, storage, and management interfaces in a small appliance enclosure.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ XC7Z007S-2CLG225E — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | XC7Z007S-2CLG225I | XC7Z007S-1CLG225C | XC7Z007S-1CLG225I | XC7Z007S-1CLG225E |
|---|---|---|---|---|---|
| Package | 225-CSPBGA (CLG225), 13 x 13 mm | 225-CSPBGA (CLG225), 13 x 13 mm - same | 225-CSPBGA (CLG225), 13 x 13 mm - same | 225-CSPBGA (CLG225), 13 x 13 mm - same | 225-CSPBGA (CLG225), 13 x 13 mm - same |
| Brand | Advanced Micro Devices (AMD / Xilinx) | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices |
| Processor Core | Single ARM Cortex-A9 MPCore, 766 MHz | Single ARM Cortex-A9 MPCore, 766 MHz | Single ARM Cortex-A9 MPCore, 766 MHz | Single ARM Cortex-A9 MPCore, 766 MHz | Single ARM Cortex-A9 MPCore, 766 MHz |
| FPGA Logic Cells | 23K logic cells (Artix-7 fabric) | 23K logic cells | 23K logic cells | 23K logic cells | 23K logic cells |
| Speed Grade | -2 | -2 (same) | -1 (faster) | -1 (faster) | -1 (faster) |
| Temperature Grade | Extended industrial (-E) | Industrial (-I) | Commercial (-C) | Industrial (-I) | Extended industrial (-E) |
| User I/O Pins | 54 | 54 | 54 | 54 | 54 |
| External ADC Differential Pairs | 4 pairs (CLG225 variant) | 4 pairs | 4 pairs | 4 pairs | 4 pairs |
| Ball Pitch | 0.8 mm | 0.8 mm | 0.8 mm | 0.8 mm | 0.8 mm |
جیاکەرەوە سەرەکییەکان
- Single-core 766 MHz Cortex-A9 integrated with 23K logic cell Artix-7 fabric in one 13 x 13 mm BGA (بەراورد بەXC7Z007S-2CLG400E)
- Extended industrial temperature grade on the same pinout as the industrial -I part (بەراورد بەXC7Z007S-2CLG225I)
- Cost-optimised -2 speed grade with the same silicon density (بەراورد بەXC7Z007S-1CLG225C)
- Four external ADC differential input pairs unique to the CLG225 package (بەراورد بەXC7Z007S-2CLG400E)
تێبینییەکانی دیزاین
The CLG225 land pattern is a 225-ball, 0.8 mm pitch grid in a 13 x 13 mm body, so fanout must be planned at board design start rather than added later. Use a via-in-pad-capable stack-up with laser or micro-via drilling directly under the SoC, place the processor system and programmable logic decoupling on the opposite side of the board, and keep the escape traces short and matched. Validate the pattern against the AMD Zynq 7000 SoC package device pinout files and the UG865 package pinout specification before releasing artwork.
The Zynq-7000 device needs separate processor system and programmable logic supplies, each with its own bulk and high-frequency decoupling placed close to the corresponding supply balls. Provide local ceramic bypass plus bulk capacitance on every rail and follow the recommended power-up sequencing in the AMD UG585 technical reference manual so that the programmable logic is not configured before its supply is stable. Sequence the rails in software using the device's power-on reset and supply monitoring blocks rather than relying only on RC delays.
Clocking quality directly determines jitter performance of both the Cortex-A9 core and the Artix-7 fabric. Feed a low-jitter reference clock into the dedicated clock-capable pins, keep the clock routing short and shielded from noisy switching nets, and avoid routing DDR memory signals adjacent to sensitive analog ADC inputs. Because the CLG225 variant exposes only four external ADC differential pairs, route those as controlled-impedance differential pairs with a solid ground reference plane beneath them to limit crosstalk during high-gain analog acquisition.
Do not substitute the XC7Z007S-2CLG400E or any other CLG400 variant on a CLG225 board: the 400-ball package has a different body size, a different ball map, 100 user I/O, and twelve ADC differential pairs, so it is a different footprint entirely. Also confirm the temperature grade before release, because the -E and -I suffixes differ in guaranteed ambient range, and confirm the speed grade, since the -1 grades provide additional timing margin over the -2 grade used here.
زانیاری پابەندبوون
The LCSC and JLCPCB part listings tag this CSPBGA-225 device as RoHS compliant. No explicit REACH, halogen-free, conflict-minerals, or AEC-Q100 statements are published for this part, and it is not an automotive-qualified device. Lead status should be confirmed against the current AMD material declaration for the Zynq-7000 family.