XC7Z015-2CLG485I - Dual Cortex-A9 Zynq SoC | AMD
MPN: XC7Z015-2CLG485I ✓ چالاکXC7Z015-2CLG485I گشتی
A Zynq-7000 SoC is a heterogeneous computing device that bridges the ARM Cortex-A9 microcontroller domain and the FPGA logic domain. Unlike a conventional FPGA, it executes software on its integrated processor while accelerating data-intensive tasks in parallel programmable logic. The XC7Z015 combines the Arm Cortex-A9 platform with Artix-7-class FPGA resources, making it suitable when a design needs flexible hardware parallelism without a separate processor and FPGA.
The headline resources include two Arm Cortex-A9 processor cores, a 766 MHz operating frequency, CoreSight debug support, and 74K logic cells. The device also supports 1.5 V, 2 V, and 2.5 V power domains. This combination allows control software, communication protocols, and user-defined datapaths to share one package while maintaining deterministic hardware interfaces between the processor system and programmable logic.
The -2 ordering designation identifies the performance grade of this XC7Z015 device, while the CLG485 suffix identifies the 485-ball chip-scale BGA package. AMD documents the XC7Z015-CLG485 package placement separately, including pin locations and device-specific assignments. Engineers should use the AMD package-pinout files and UG865 package information when assigning PCB balls and power rails.
Typical uses include industrial image processing, embedded vision, programmable networking, high-speed data acquisition, and control systems requiring both a real-time processor and FPGA acceleration. The ARM side is appropriate for operating systems, networking stacks, and application-level control, while programmable logic can implement parallel algorithms, custom interfaces, or low-latency signal chains. These functions can exchange data through dedicated interfaces inside the SoC rather than through external component-to-component buses.
Board design must account for the 485-CSPBGA escape-routing requirement, multiple supply rails, decoupling, and thermal performance of a compact 19 x 19 mm package. Use the pin-description and package-placement documentation during schematic capture, then cross-check every ball against the selected design tools. Confirm the required Vivado device support, memory interface topology, and board-level power sequencing before releasing the PCB layout.
This product overview combines the exact resource and package details for the XC7Z015-2CLG485I with practical guidance for FPGA-assisted embedded processing. It also organizes same-package speed and temperature alternatives, selection criteria, and design cautions so engineers can evaluate the device against the exact requirements of a Zynq-7000 implementation.
جێگرەوەکانی جێگۆڕکێ بۆ XC7Z015-2CLG485I — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ XC7Z015-2CLG485I (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Mounting Type, Device Type, Package, Debug Support, FPGA Logic Cells.
XC7Z015-1CLG485I
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →XC7Z015-2CLG485E
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC7Z015-1CLG485E
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
XC7Z015-CLG485
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
XC7Z015-2CLG485I5099
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
XC7Z015-2CLG485I زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | Zynq-7000 SoC with FPGA logic and dual-core Arm Cortex-A9 processor |
| Processor Core | Dual-core Arm Cortex-A9 MPCore |
| Processor Architecture | 32-bit RISC |
| Maximum Processor Frequency | 766 MHz |
| FPGA Logic Cells | 74K logic cells |
| Debug Support | CoreSight |
| FPGA Family | Artix-7 FPGA |
| SoC Series | Zynq-7000 |
| پاکێج | 485-CSPBGA, 19 x 19 mm |
| ژمارەی پین | 485 balls |
| Supported Supply Voltages | 1.5 V, 2 V, 2.5 V |
| جۆری دامەزراندن | Surface mount |
| Device Performance Grade | -2 grade |
ڕێنمایی ڕێکخستنی پینی XC7Z015-2CLG485I 485-cspbga, 19 x 19 mm
ڕێکخستنی پین بۆ XC7Z015-2CLG485I (پاکێجی 485-cspbga, 19 x 19 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ XC7Z015-2CLG485I.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
XC7Z015-2CLG485I گونجاوە بۆ 6 بەکارھێنانs: Industrial Machine Vision, Programmable Networking Equipment, High-Speed Data Acquisition, Embedded Control Systems, Digital Signal Processing, Aerospace and Defense Test Equipment.
Industrial Machine Vision
The XC7Z015-2CLG485I fits industrial machine-vision systems that must divide image acquisition, preprocessing, and decision logic between programmable hardware and software. Its two Arm Cortex-A9 cores at up to 766 MHz can run camera control, communications, and application logic, while the 74K FPGA logic cells can accelerate pixel filtering, thresholding, or format conversion. This arrangement reduces external data movement by keeping high-throughput image paths in programmable logic. The design trade-off is routing complexity in the 485-CSPBGA package and the need to partition tasks carefully so the processor and logic fabric do not duplicate functionality.
پێشنیارکراو
Programmable Networking Equipment
The XC7Z015-2CLG485I is useful in networking appliances that combine packet-oriented software with configurable hardware pipelines. The dual Cortex-A9 cores can support control-plane applications, Ethernet stacks, and management protocols, while the FPGA portion can implement parallel framing, classification, compression, or traffic-shaping functions. A 766 MHz processor and 74K logic cells provide a meaningful division of labor without requiring two separate devices. Engineers should balance fixed versus programmable logic and verify memory bandwidth, because packet buffers and external interfaces can become the performance limiters.
پێشنیارکراو
High-Speed Data Acquisition
The XC7Z015-2CLG485I can serve as the central device in a data-acquisition system that needs deterministic parallel processing alongside embedded control software. Programmable logic can capture, deskew, filter, or channelize high-rate samples, while the dual 766 MHz Arm Cortex-A9 cores perform analysis, buffering, storage management, and user-interface tasks. This division enables a compact 19 x 19 mm SoC implementation compared with separate FPGA and processor packages. The principal engineering constraint is sustaining data rates through the available memory interfaces without exceeding timing or bandwidth limits in the selected design configuration.
پێشنیارکراو
Embedded Control Systems
The XC7Z015-2CLG485I supports embedded control platforms requiring real-time peripheral handling, network connectivity, and application software in one device. The Arm Cortex-A9 side can run an operating system, control protocols, diagnostics, and supervisory logic, while the 74K FPGA cells can service deterministic I/O, timing-sensitive sequences, or custom bus bridges. Integration reduces component count and shortens communication paths between software and hardware. Designers should reserve logic resources for timing-critical paths and leave the processor side responsible for supervisory tasks that do not require deterministic execution.
پێشنیارکراو
Digital Signal Processing
The XC7Z015-2CLG485I is well suited to digital signal-processing implementations that combine repeatable parallel arithmetic with flexible software control. The FPGA fabric can implement filters, FFT stages, correlators, or data-format conversion, while the dual Arm Cortex-A9 processors manage configuration, control flow, diagnostics, and higher-level analysis. Processing at up to 766 MHz supports the software side, while programmable parallelism handles throughput-sensitive stages. For production designs, verify clocking, DSP resource use, and external-memory bandwidth, then evaluate whether the -2 grade provides the required timing margin.
پێشنیارکراو
Aerospace and Defense Test Equipment
The XC7Z015-2CLG485I can be evaluated for ruggedized test and control equipment where an I temperature grade, processor software, and programmable logic are needed in a compact package. The processor cores can manage test sequencing, data logging, and communications, while the FPGA fabric handles deterministic stimulus generation, response capture, or protocol formatting. Its 485-CSPBGA form factor supports integration into dense instrumentation but demands careful escape routing and thermal analysis. Before deployment, confirm the complete device qualification status and environmental requirements rather than assuming that the I suffix covers every aerospace qualification obligation.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ XC7Z015-2CLG485I — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | XC7Z015-1CLG485I | XC7Z015-2CLG485E | XC7Z015-1CLG485E | XC7Z015-CLG485 |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 485-CSPBGA | 485-CSPBGA | 485-CSPBGA | 485-CSPBGA | 485-CSPBGA |
| Device Family | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 |
| Processor Core | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore |
| FPGA Logic Cells | 74K logic cells | 74K logic cells | 74K logic cells | 74K logic cells | 74K logic cells |
| Supported Supply Voltages | 1.5 V, 2 V, 2.5 V | 1.5 V, 2 V, 2.5 V | 1.5 V, 2 V, 2.5 V | 1.5 V, 2 V, 2.5 V | 1.5 V, 2 V, 2.5 V |
جیاکەرەوە سەرەکییەکان
- Higher -2 performance grade than the -1 alternatives (بەراورد بەXC7Z015-1CLG485I)
- I temperature grade for industrial-temperature designs (بەراورد بەXC7Z015-2CLG485E)
- Integrated processor and programmable-logic resources (بەراورد بەXC7Z015-CLG485)
- Direct ordering-path compatibility with an additional suffix variant (بەراورد بەXC7Z015-2CLG485I5099)
تێبینییەکانی دیزاین
Use the AMD XC7Z015-CLG485 package-placement diagram and Zynq-7000 pinout files as the physical source of truth for all 485 balls. Mark the package orientation, ball-A1 location, and power pins before routing. For a 19 x 19 mm CSPBGA, assign vias beneath the device where the escape pattern permits, and verify each board layer against the selected stack-up rather than relying on a generic BGA fanout.
Plan the 1.5 V, 2 V, and 2.5 V rails as separate supply domains and follow the AMD recommended-decoupling and power-sequence requirements for the selected Zynq-7000 configuration. Place high-frequency decoupling capacitors close to the corresponding package balls, maintain adequate return paths for switching current, and include test points for each rail. Validate sequencing at power-up and power-down so processor and programmable-logic domains do not enter an invalid state.
Estimated thermal performance depends on the board copper, adjacent components, airflow, and actual XC7Z015 utilization, so calculate the final junction temperature with the selected PCB implementation rather than a package-only estimate. Remove heat through the board's exposed thermal pathways, minimize hot components beneath the BGA where practical, and perform thermal simulation after placement. The 19 x 19 mm package's small footprint can concentrate heat into a limited copper area.
Constrain processor, memory, clock, high-speed serial, and programmable-logic interfaces using the timing and I/O standards enabled for the exact device grade. Maintain continuous reference planes, use appropriate length matching, and avoid routing high-speed interfaces through split planes. After schematic completion, run the Vivado timing and physical-design checks with the correct -2 speed grade and CLG485 package selected to prevent using an unintended device model.
Do not treat every XC7Z015-CLG485 ordering code as an automatic substitution. Confirm the -2 speed grade, I temperature suffix, package dimensions, and the meaning of any additional ordering suffix. A same-footprint alternative still requires timing, temperature, qualification, lifecycle, and software-tool checks. This is particularly important when changing from the XC7Z015-2CLG485I to the XC7Z015-2CLG485E or a -1 performance-grade device.
زانیاری پابەندبوون
The device is a programmable SoC for industrial and commercial embedded applications rather than an automotive-qualified AEC-Q100 product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact ordering code.