AMD

XC9536-7VQ44I - 36-Macrocell 5V CPLD | AMD

MPN: XC9536-7VQ44I ✗ کۆتایی ژیان
4.5 V to 5.5 V Vdss 44 pins Package
MOQ: 1 |

XC9536-7VQ44I گشتی

The AMD XC9536-7VQ44I is an obsolete, in-system-programmable complex programmable logic device (CPLD) built with Advanced CMOS 5V Fast FLASH technology. It provides 36 macrocells, approximately 800 usable logic gates, 34 user I/O pins, and a 44-pin TQFP package in an industrial temperature grade. The device belongs to the XC9500 5 V CPLD family and supports parallel programming of multiple XC9500 devices. According to the available XC9536 family specifications, its maximum pin-to-pin delay is 7.5 ns and its internal supply range is 4.5 V to 5.5 V.

A CPLD is a programmable-logic semiconductor that combines macrocell-based combinational and sequential logic with a permanently programmed or reprogrammable interconnect. The CPLD hierarchy can be described as XC9500 CPLD family, complex programmable logic device, programmable-logic device, programmable-logic IC, and semiconductor. Unlike an FPGA, the XC9500 architecture provides a comparatively regular macrocell structure and nonvolatile Fast FLASH configuration, allowing the same PCB design to be reprogrammed during development without using a separate configuration memory device.

Key features of the XC9536-7VQ44I include 36 macrocells, 34 user I/O pins, in-system programmability with a stated endurance of at least 10,000 program or erase cycles, and support for parallel programming of multiple devices. Its 7.5 ns speed designation differentiates it from slower XC9536-5 and XC9536-6 members. The industrial-grade ordering code also distinguishes it from commercial-temperature XC9536 variants ending in C, making temperature requirements an important selection constraint.

The device is suitable for compact control logic, data routing, interface bridging, and fixed-format signal-processing functions that require deterministic programmable behavior and nonvolatile configuration. Its 5 V supply and 34 I/O pins make it relevant to legacy industrial, communications, and embedded-control equipment where modern FPGA migration would add unnecessary complexity. Designers should account for the device's obsolete lifecycle status before committing it to a new production design.

Programming requires a compatible device programmer and the appropriate Xilinx or AMD programming cable, while the 5 V-powered system must meet the family’s input and output voltage constraints. Decoupling and layout should follow the datasheet guidance for the 44-pin TQFP footprint. Because this device is obsolete, inventory availability is likely limited and long-term sourcing should be confirmed directly with authorized distributors.

This page consolidates the verified XC9536-7VQ44I specifications, same-package alternatives, pricing status, and design guidance. It distinguishes true TQFP-44 drop-in choices from PLCC-44 parts that require a different footprint, helping engineers make a sourcing decision without treating electrically similar devices as mechanically interchangeable.

جێگرەوەکانی جێگۆڕکێ بۆ XC9536-7VQ44I — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ XC9536-7VQ44I (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Technology, Temperature Grade, Device Type, Mounting Type.

AMD
Package: 44-pin VQFP
Technology: Advanced CMOS
Device Type: Complex Programmable Logic Device (CPLD)
بەراوردکردن لەگەڵ XC9536-7VQ44I →
AMD
Package: 44-pin TQFP
Technology: 0.5 µm Advanced CMOS 5V FastFLASH technology
Temperature Grade: Commercial
بەراوردکردن لەگەڵ XC9536-7VQ44I →
Xilinx
Package: 44-pin PLCC
Temperature Grade: Industrial
بەراوردکردن لەگەڵ XC9536-7VQ44I →

XC9536-7VQ44C

✅ جێگرەوەی ڕاستەوخۆ
📦 44-pin TQFP (VQ44)
Same 7.5 ns speed grade and 44-pin TQFP footprint; commercial temperature grade replaces industrial grade.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

XC9536-6VQ44C

✅ جێگرەوەی ڕاستەوخۆ
AMD
📦 44-pin TQFP (VQ44)
Complex Programmable Logic Device (CPLD) · In-System Programmable, minimum 10,000 program/erase cycles · 36 macrocells · 800 gates · 34 I/O · 100 MHz · 5 ns · 5 V

پەیوەندی بۆ نرخ

بینینی داتاشیت →

XC9536-5VQ44C

✅ جێگرەوەی ڕاستەوخۆ
AMD
📦 44-pin TQFP (VQ44)
Complex Programmable Logic Device (CPLD) · 36 macrocells · 800 gates · 34 I/O · 5 ns · 125 MHz · In-System Programmable · Minimum 10,000 cycles

پەیوەندی بۆ نرخ

بینینی داتاشیت →

XC9536-10VQG44C

✅ جێگرەوەی ڕاستەوخۆ
📦 44-pin TQFP (VQ44)
Same 36 macrocells, 800 gates, and 44-pin TQFP package; 10 ns speed grade is 2.5 ns or 33% slower than the 7.5 ns target.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

XC9536-8VQ44C

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 44-pin TQFP (VQ44)
Same-family 44-pin TQFP and 36-macrocell architecture; 8 ns speed grade is 0.5 ns or about 7% slower, while commercial grade replaces industrial grade.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

XC9536-7VQ44I زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Device Type In-system-programmable CPLD
Product Family XC9500 5 V CPLD family
Technology Advanced CMOS 5 V Fast FLASH
Number of Macrocells 36 macrocells
Usable Logic Gates 800 gates
Number of User I/O Pins 34 I/O pins
Total Package Pins 44 pins
Maximum Pin-to-Pin Logic Delay 7.5 ns
Internal Supply Voltage Range 4.5 V to 5.5 V
Programmable Type In-system programmable; minimum 10,000 program or erase cycles
Programming Support Parallel programming of multiple XC9500 devices
Temperature Grade Industrial grade
Package Type 44-pin TQFP, gull wing, square
جۆری دامەزراندن Surface-mount technology (SMT)
Packaging Tray
دۆخی RoHS RoHS non-compliant
Lead-Free Status Contains lead

ڕێنمایی ڕێکخستنی پینی XC9536-7VQ44I 44-pin tqfp, gull wing, square

ڕێکخستنی پین بۆ XC9536-7VQ44I (پاکێجی 44-pin tqfp, gull wing, square). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 44-pin tqfp, gull wing, square بۆ XC9536-7VQ44I

هیچ داتای وردی پینئاوت بەردەست نییە بۆ XC9536-7VQ44I.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

XC9536-7VQ44I گونجاوە بۆ 6 بەکارھێنانs: Legacy Industrial Control Logic, Interface Bridging and Data Routing, Programmable Signal Conditioning, Legacy Communications Adapter, Embedded System Boot and Sequencing, Equipment Repair and Obsolescence Management.

🏭

Legacy Industrial Control Logic

The XC9536-7VQ44I fits legacy industrial control boards that require deterministic combinational logic, latched state, and field reprogrammability. Its 36 macrocells and 34 user I/O pins can implement interlocks, sequencing, signal conditioning, and discrete control functions without an external nonvolatile memory. The industrial-grade ordering code is valuable where ambient temperature exceeds commercial-device limits, while the 7.5 ns maximum pin-to-pin delay supports faster control paths than the slower family members.

🌐

Interface Bridging and Data Routing

The AMD XC9536-7VQ44I is useful for bridging mismatched digital interfaces in legacy communications equipment. Its 34 I/O pins and 36 macrocells can route control signals, qualify asynchronous inputs, translate simple bus formats, and implement protocol state machines with nonvolatile configuration. The 4.5 V to 5.5 V internal supply range supports classic 5 V logic, and the 7.5 ns delay class provides additional timing margin over the 6 ns and 5 ns grades when control paths are critical.

⚙️

Programmable Signal Conditioning

The XC9536-7VQ44I can implement configurable debouncing, pulse qualification, edge detection, delay, and signal normalization around older sensors and actuator drivers. Thirty-four I/O pins provide enough connections for multiple discrete channels, while 36 macrocells support reusable combinational and sequential logic. In-system programmability allows field adaptation of thresholds or timing sequences without replacing the device. The industrial temperature grade is preferable where the conditioning electronics operate in variable factory environments.

🔌

Legacy Communications Adapter

The XC9536-7VQ44I suits adapter and interface cards that need compact nonvolatile glue logic beside communication controllers. Its 34 I/O pins can implement modem-control lines, interrupt logic, FIFO-like sequencing, and connector-level protocol conversion. Nonvolatile Fast FLASH configuration permits board-level reprogramming, and the 7.5 ns speed grade helps minimize combinational delay in handshake paths. For new high-speed protocols, designers should verify legacy electrical limits rather than assuming the CPLD can replace a modern FPGA.

🖥️

Embedded System Boot and Sequencing

The XC9536-7VQ44I can implement reset sequencing, power-rail monitoring, configuration control, and discrete state management in a legacy embedded system. Thirty-four I/O pins allow several peripheral enables and status signals to be coordinated, while the 36 macrocells provide enough logic for timing windows and fault handling. Its nonvolatile configuration simplifies field recovery because the controller behavior is restored after power cycling. The 5 V supply range and industrial grade make it appropriate for many established industrial controllers.

🔧

Equipment Repair and Obsolescence Management

The XC9536-7VQ44I remains useful for repairing and sustaining older industrial or communications equipment where redesigning the original board would be uneconomic. A programmed replacement can reproduce fixed logic functions, decode control buses, and bridge disconnected interfaces. The 36 macrocells and 34 I/O pins match the documented architecture of the XC9500 family, while same-package speed-grade variants offer sourcing flexibility. Because the target is obsolete and RoHS non-compliant, repair inventory should include traceability, programming records, and environmental-policy documentation.

کورتەی بەرهەمە پێشنیارکراوەکان

XC9536-7PC44I Xilinx بەکارهێنراوە لە: Legacy Industrial Control Logic, Equipment Repair and Obsolescence Management P82B96DR Texas Instruments بەکارهێنراوە لە: Legacy Industrial Control Logic, Interface Bridging and Data Routing ATTINY40-SUR Microchip Technology بەکارهێنراوە لە: Legacy Industrial Control Logic MC3403D Texas Instruments بەکارهێنراوە لە: Interface Bridging and Data Routing MC3437D RS-485 interface companion بەکارهێنراوە لە: Interface Bridging and Data Routing AK4137EQ AKM (Asahi Kasei Microdevices) بەکارهێنراوە لە: Programmable Signal Conditioning MC1458D Texas Instruments بەکارهێنراوە لە: Programmable Signal Conditioning DG419CY+ Analog Devices بەکارهێنراوە لە: Programmable Signal Conditioning MC3487J Texas Instruments بەکارهێنراوە لە: Legacy Communications Adapter MC3437L Motorola بەکارهێنراوە لە: Legacy Communications Adapter ENC424J600T-I/PT Microchip Technology بەکارهێنراوە لە: Legacy Communications Adapter STM32F072RBH6TR STMicroelectronics بەکارهێنراوە لە: Embedded System Boot and Sequencing ATMEGA328P-MUR Microchip Technology بەکارهێنراوە لە: Embedded System Boot and Sequencing P82B715D Texas Instruments بەکارهێنراوە لە: Embedded System Boot and Sequencing XC9536-6PC44C AMD بەکارهێنراوە لە: Equipment Repair and Obsolescence Management XC9536-5CS48C AMD بەکارهێنراوە لە: Equipment Repair and Obsolescence Management
What is the AMD XC9536-7VQ44I?
The AMD XC9536-7VQ44I is an obsolete 5 V, in-system-programmable CPLD with 36 macrocells, approximately 800 usable gates, 34 user I/O pins, and a 44-pin TQFP package. According to the XC9500 5 V CPLD family datasheet information, it uses Advanced CMOS 5 V Fast FLASH technology and supports parallel programming of multiple devices. It is intended for legacy control, routing, and interface-bridging logic rather than high-density FPGA workloads.
Where can I download the XC9536-7VQ44I datasheet PDF?
The XC9536-7VQ44I datasheet PDF is available through the linked DigChip datasheet page, DigiKey product resources, and Octopart. The documented device details include 36 macrocells, 34 user I/O pins, a 4.5 V to 5.5 V internal supply range, and in-system programmability. Buyers should verify the PDF revision and package drawing against the exact XC9536-7VQ44I ordering code before using it for a new PCB or production release.
Where can I find the XC9536-7VQ44I pinout?
The XC9536-7VQ44I pin assignment is defined in the XC9500 5 V CPLD family datasheet and must be checked against the 44-pin TQFP drawing. The verified source confirms 44 total package pins and 34 user I/O pins, but it does not provide the complete numbered pin table. Consequently, no individual pin names are asserted here. Always use the family datasheet pin diagram and your specific device package drawing before laying out a board.
How much does the XC9536-7VQ44I cost?
A verified numeric price for the obsolete XC9536-7VQ44I was not present in the supplied distributor results, so the listed tier prices are 0.00 quote placeholders and must not be interpreted as free inventory. As of 2026-10-28, DigiKey and Octopart are appropriate channels for checking live stock, condition, and quotation. Obsolete parts can vary sharply in price depending on remaining factory inventory, traceability, and whether the order is placed as reel, tray, or lot.
Is the XC9536-7VQ44I in stock and what is its lead time?
Stock and lead time for the XC9536-7VQ44I are not explicitly stated in the supplied verified results. As of 2026-10-28, availability should therefore be treated as quote-dependent rather than confirmed in stock. The part is marked obsolete, and the Octopart page reports listings from 16 distributors, but those listings alone do not establish current inventory. Request a dated written quotation and manufacturer traceability information before committing to a production schedule.
Where can I buy the XC9536-7VQ44I online?
The XC9536-7VQ44I can be requested through DigiKey and the distributors indexed by Octopart, while DigiKey identifies the current catalog brand as AMD. As of 2026-10-28, a confirmed numeric price and stock count were not included in the retrieved results, so quote-based purchasing is appropriate. For obsolete programmable logic, confirm the device marking, package code, industrial temperature grade, programming status, and return conditions in writing before shipment.
What are the key specifications of XC9536-7VQ44I that engineers should know?
The XC9536-7VQ44I combines 36 macrocells, 800 usable gates, 34 user I/O pins, and a 7.5 ns maximum pin-to-pin delay in an industrial-grade 44-pin TQFP. According to the XC9500 family specifications, its internal supply voltage range is 4.5 V to 5.5 V, and it supports in-system programming for at least 10,000 cycles. The -7 speed grade is faster than the -5 and -6 variants, while the I suffix identifies industrial temperature qualification.
XC9536-7VQ44I vs XC9536-6VQ44C — which is better?
The XC9536-7VQ44I is the better choice when the design requires industrial temperature qualification or the faster 7.5 ns speed grade. The XC9536-6VQ44C retains the same 36-macrocell, 34-I/O architecture and 44-pin package, but its 6 speed grade is 1 ns slower and its C suffix denotes commercial temperature grade. According to the verified comparison data, both provide 800 gates; the temperature difference, not logic capacity, is the decisive constraint.
Can XC9536-7VQ44C replace XC9536-7VQ44I?
Yes, the XC9536-7VQ44C is a mechanically compatible same-package option if the end equipment does not require the target part's industrial temperature grade. It retains the 7.5 ns speed grade, 36 macrocells, 34 user I/O pins, 800 gates, and 44-pin TQFP package. The important limitation is that the C variant is commercial grade rather than industrial grade. Verify every operating-temperature requirement and validate the programmed configuration before approving it as a replacement.
What can replace the XC9536-7VQ44I?
The closest same-footprint replacements are the XC9536-7VQ44C, XC9536-6VQ44C, XC9536-5VQ44C, and XC9536-10VQG44C, subject to speed and temperature requirements. The XC9536-7VQ44C preserves the 7.5 ns grade but changes industrial temperature coverage to commercial. The -6 and -5 parts are progressively slower, while the -10 part is slower still. All must retain the 44-pin TQFP footprint for a true drop-in board fit.
When should I choose the XC9536-7VQ44I over a slower XC9536 variant?
Choose the XC9536-7VQ44I when a legacy design requires both the 7.5 ns speed grade and industrial temperature operation. The XC9536-6VQ44C and XC9536-5VQ44C preserve logic capacity and package size but trade 1.5 ns or 2.5 ns of nominal maximum pin-to-pin delay for lower speed. The exact timing margin must be checked with the device speed grade and system clock constraints rather than inferred solely from the ordering code.
Is the XC9536-7PC44I a drop-in replacement for the XC9536-7VQ44I?
No, the XC9536-7PC44I is not a physical drop-in replacement for the XC9536-7VQ44I because it uses a 44-pin PLCC package rather than the target's 44-pin TQFP gull-wing package. It is listed only as a functional same-family counterpart in the supplied comparison data. A PCB designed for TQFP leads and surface mounting cannot accept the PLCC package without footprint, assembly, and mechanical changes.
What is the best AMD equivalent for the XC9536-7VQ44I?
The best same-package AMD-family equivalent is the XC9536-7VQ44C when commercial temperature operation is acceptable. It preserves the 7.5 ns speed grade, 36 macrocells, 800 gates, 34 user I/O pins, and 44-pin TQFP package. According to the verified LoveChip alternative listing, the electrical and package characteristics are identical; however, the original XC9536-7VQ44I is industrial grade and the replacement is commercial grade.
Does the XC9536-7VQ44I require 5 V power and what programming hardware is needed?
The XC9536-7VQ44I operates from a documented 4.5 V to 5.5 V internal supply range and normally uses 5 V-compatible I/O. Programming requires a supported Xilinx or AMD device programmer and the appropriate programming cable; parallel programming is also supported for multiple XC9500 devices according to the family information. The exact cable, adapter, and software release must be confirmed from the programming guide because those details were not included in the supplied results.
Is the XC9536-7VQ44I RoHS compliant?
No, the verified XC9536-7VQ44I specifications identify it as RoHS non-compliant and containing lead. It is also an obsolete component, so new regulatory and sustainability requirements should be reviewed before use in additional products. REACH status, halogen-free status, and conflict-minerals compliance were not confirmed in the supplied data. For repairs of legacy equipment, document the environmental treatment requirements and avoid assuming newer RoHS-compliant CPLDs are drop-in replacements.

داتای سەرچاوەی ئەندازیاری بۆ XC9536-7VQ44I — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the XC9536-7VQ44I when repairing or sustaining an existing design that specifies the -7 industrial-grade variant and requires its 7.5 ns timing class. The XC9536-7VQ44C is the closest sourcing option because it preserves the speed grade and 44-pin TQFP footprint, but its commercial temperature rating may make it unsuitable for industrial environments. Use the XC9536-6VQ44C only after confirming that the additional 1 ns of maximum delay still provides adequate timing margin. The -5, -8, and -10 VQ44 options introduce larger speed changes and should be treated as functional drop-ins rather than automatic timing equivalents. Do not select the XC9536-7PC44I for direct replacement because PLCC and TQFP require different PCB footprints. Since this device is obsolete and RoHS non-compliant, obtain a written quotation, traceability details, and programming-file assurance before committing to any alternative.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە XC9536-7VQ44C XC9536-6VQ44C XC9536-5VQ44C XC9536-10VQG44C XC9536-8VQ44C
Package 44-pin TQFP (VQ44) 44-pin TQFP (VQ44) 44-pin TQFP (VQ44) 44-pin TQFP (VQ44) 44-pin TQFP (VQ44) 44-pin TQFP (VQ44)
Brand AMD AMD AMD AMD AMD AMD
Maximum Pin-to-Pin Delay 7.5 ns 7.5 ns 6 ns 5 ns 10 ns 8 ns
Temperature Grade Industrial grade Commercial grade Commercial grade Commercial grade Commercial grade Commercial grade

جیاکەرەوە سەرەکییەکان

  • Industrial-grade option within the same speed class (بەراورد بەXC9536-7VQ44C)
  • Faster timing rating than slower VQ44 alternatives (بەراورد بەXC9536-6VQ44C)
  • Higher speed ceiling than the -10 family member (بەراورد بەXC9536-10VQG44C)

تێبینییەکانی دیزاین

Do not treat the XC9536-7PC44I as a drop-in substitute for the XC9536-7VQ44I. Both have 44 pins, but the PC44I uses PLCC while the VQ44I uses a gull-wing TQFP footprint. Verify the package drawing, lead pitch, body dimensions, and PCB land pattern. For a production replacement, also confirm whether commercial temperature operation is acceptable and whether the source can provide the programmed JEDEC file or can program a customer-supplied file.

Place the 5 V supply bypass capacitor close to the device's power and ground pins, and keep programming and ordinary user-I/O routing away from sensitive analog paths where possible. Follow the exact XC9500 family recommended layout because this legacy device predates many current EMC and high-speed design practices. Pay particular attention to exposed lead pullback, solder-joint inspection, and adequate clearance between adjacent fine-pitch TQFP leads.

Design the board for a nominal 5 V rail because the verified internal operating range is 4.5 V to 5.5 V. Check both the power source tolerance and the voltage required by connected 5 V peripherals, especially during in-system programming. The supplied results do not provide detailed absolute-maximum ratings, I/O structures, or per-pin current limits, so those values must be obtained from the official family datasheet before finalizing the power tree.

A same package name does not guarantee an equivalent replacement. The -7, -6, -5, -8, and -10 speed grades affect timing, while the I and C suffixes affect temperature qualification. Use static timing analysis with the actual replacement grade, and avoid assuming that a commercial-temperature part can satisfy industrial ambient requirements. Record the programmed configuration checksum and board test results for every approved substitution.

زانیاری پابەندبوون

RoHS
Non Compliant
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
No
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The verified specification listing identifies the XC9536-7VQ44I as RoHS non-compliant and containing lead. REACH, halogen-free status, and conflict-minerals compliance were not provided.

داتا پشتڕاستکراوەتەوە لە: 2026-10-28 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

XC9536-7VQ44I AMD XC9536-7VQ44I CPLD XC9536-7VQ44I datasheet PDF XC9536 36 macrocell 34 I/O CPLD XC9536-7VQ44I 44-pin TQFP XC9536-7VQ44I industrial control logic XC9536-7VQ44I vs XC9536-7VQ44C XC9536-7VQ44I drop-in replacement XC9536-7VQ44I buy price XC9536-7VQ44I obsolete availability where to find XC9536-7VQ44I pinout XC9536-7VQ44I programming cable 44-pin TQFP obsolete CPLD replacement

پێکهاتە و زاراوە پەیوەندیدارەکان

AMD Xilinx XC9536-7VQ44I XC9536-7VQ44C XC9536-6VQ44C XC9536-5VQ44C XC9536-10VQG44C XC9536-8VQ44C XC9536-7PC44I XC9500 5 V CPLD family complex programmable logic device CPLD programmable-logic device programmable-logic IC semiconductor in-system programmable Fast FLASH Advanced CMOS macrocell logic gate user I/O pin pin-to-pin logic delay 44-pin TQFP VQ44 industrial temperature grade RoHS
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ