XMC4700F144K2048AAXQMA1 - 144MHz Cortex-M4 MCU | Infineon
MPN: XMC4700F144K2048AAXQMA1 ✓ چالاکXMC4700F144K2048AAXQMA1 گشتی
A microcontroller is a programmable system-on-chip used to supervise sensors, actuators, communications, and control loops. The XMC4000 hierarchy places this component within embedded industrial control, where the Arm Cortex-M4 core executes real-time control software and the integrated Ethernet MAC supports connected equipment. This combination makes the MCU relevant to factory automation, industrial networking, motor-control platforms, and connected industrial sensors.
Three headline specifications define the part: a 144 MHz Arm Cortex-M4 core, 2 MB of flash organized as 2M × 8 bits, and a 144-pin PG-LQFP-24 exposed-pad package. The product also includes an Ethernet MAC. Compared with smaller general-purpose MCUs, the 144 MHz core provides greater processing headroom for control algorithms, while 2 MB of flash accommodates embedded code, configuration data, and application-specific routines. The exposed pad assists thermal transfer when the device dissipates power during high-clock-rate operation.
The XMC4700 architecture is aimed at embedded industrial control rather than simple utility control. Its Arm Cortex-M4 processor supports efficient handling of control logic, and the Ethernet MAC adds a path for Ethernet-based communication. Exact peripheral assignments, electrical limits, memory organization outside the stated flash capacity, and timing characteristics should be confirmed in the Infineon XMC4700/XMC4800 data sheet and reference manual before final circuit design.
Typical applications include industrial Ethernet controllers, programmable logic controllers, factory automation modules, building automation equipment, and industrial sensor gateways. The device can also serve as the central controller in motor-control and embedded communication designs where the XMC4700 platform, Ethernet connectivity, and generous flash capacity are useful. Software development is supported by the XMC4700 ecosystem, while board-level decisions must account for the 144-pin exposed-pad land pattern and associated power, clock, and signal-integrity requirements.
For PCB implementation, use the manufacturer package drawing and pin-description tables rather than relying on generic 144-pin LQFP conventions. Place the exposed pad on a solid, low-impedance ground plane and follow the recommended via arrangement. Decoupling networks should be positioned directly beside the relevant supply pins, while external clock and Ethernet lines require controlled return paths to limit coupling into sensitive control signals.
This product page combines the verified XMC4700 ordering information, exact flash and clock specifications, package details, source documentation, and application-oriented engineering guidance. It helps designers identify the correct industrial Cortex-M4 device while distinguishing the target order code from related XMC4700 and XMC4800 family members.
جێگرەوەکانی جێگۆڕکێ بۆ XMC4700F144K2048AAXQMA1 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ XMC4700F144K2048AAXQMA1 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package.
XMC4800F144K2048AAXQMA1
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
XMC4700F144F2048AAXQMA1
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XMC4800F144F1536AAXQMA1
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
XMC4700F144K2048AAXQMA1 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit industrial microcontroller |
| Microcontroller Family | XMC4000 |
| Processor Core | Arm Cortex-M4 |
| CPU Frequency | 144 MHz |
| Instruction Set | 32-bit RISC |
| Flash Memory | 2 MB (2M × 8 bits) |
| Integrated Network Controller | Ethernet MAC |
| Operating Voltage | 3.3 V |
| پاکێج | PG-LQFP-144-24 exposed-pad package |
| ژمارەی پین | 144 pins |
| جۆری دامەزراندن | Surface mount |
| Shipping Format | Tray |
| Qualification Segment | Industrial |
ڕێنمایی ڕێکخستنی پینی XMC4700F144K2048AAXQMA1 pg-lqfp-144-24 exposed-pad package
ڕێکخستنی پین بۆ XMC4700F144K2048AAXQMA1 (پاکێجی pg-lqfp-144-24 exposed-pad package). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ XMC4700F144K2048AAXQMA1.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
XMC4700F144K2048AAXQMA1 گونجاوە بۆ 6 بەکارھێنانs: Industrial Ethernet Controllers, Factory Automation and PLC Modules, Industrial Sensor Gateways, Building Automation Equipment, Motor-Control Platforms, Embedded Communication Equipment.
Industrial Ethernet Controllers
The XMC4700F144K2048AAXQMA1 fits industrial Ethernet controllers because its 144 MHz Arm Cortex-M4 core can execute protocol and supervisory tasks while the integrated Ethernet MAC supports network communication. The 2 MB flash capacity provides room for firmware, configuration parameters, and update-oriented application logic within one microcontroller. A typical design would connect the Ethernet PHY through the MCU's supported interface, place termination and magnetics close to the connector, and isolate network routing from sensitive control signals. The 144-pin exposed-pad LQFP also provides more I/O than compact MCU packages, supporting status indicators, communications, and multiple sensor inputs. Before layout release, verify the exact Ethernet pin assignment, PHY interface requirements, clock configuration, and exposed-pad connection in the Infineon data sheet.
پێشنیارکراو
Factory Automation and PLC Modules
The XMC4700F144K2048AAXQMA1 is suitable for compact factory automation and PLC-style modules that combine real-time control with communication. Its 144 MHz Cortex-M4 core provides processing headroom for sequencing, diagnostics, and communication tasks, while 2 MB of flash can hold substantially more code than a small 8-bit controller. The 144-pin package offers a broad pin count for digital inputs, outputs, and industrial interfaces, and the Ethernet MAC can connect the module to supervisory equipment. Designers should reserve clean regulated supplies, place decoupling capacitors close to supply pins, and route external interfaces away from the Ethernet and clock nets. Firmware should also include startup checks and safe output states because the MCU itself does not establish functional safety certification for the completed machine.
پێشنیارکراو
Industrial Sensor Gateways
The XMC4700F144K2048AAXQMA1 can act as the processing hub in an industrial sensor gateway, collecting measurements from local sensors and forwarding summarized data over Ethernet. Its 144 MHz Arm Cortex-M4 core is appropriate for sampling, filtering, diagnostics, and protocol processing, while the 2 MB flash capacity allows local configuration and logging code to coexist with the network application. The large 144-pin package simplifies connection to multiple sensors, digital I/O, and communications circuitry. Analog sensor conditioning still requires suitable external components because the target specification does not establish precision converter performance. Layout planning should separate sensitive analog and sensor paths from Ethernet clocks and switching nodes, provide local filtering at connector entries, and follow the manufacturer exposed-pad via recommendation to limit thermal and return-path problems.
پێشنیارکراو
Building Automation Equipment
The XMC4700F144K2048AAXQMA1 can support building automation controllers that coordinate lighting, HVAC, access equipment, and occupancy-related sensors. The 144 MHz Cortex-M4 core supports concurrent control logic and network tasks, and the integrated Ethernet MAC enables communication with building infrastructure. Its 2 MB flash provides sufficient program storage for communication stacks, configuration schedules, diagnostics, and application logic, while the 144-pin package exposes ample digital I/O for sensors and actuators. In a building controller, use galvanic isolation where required by the interface specification, select appropriately rated external drivers for relays, and provide watchdogs and safe-state behavior in firmware. Verify operating-temperature limits and the manufacturer's electrical limits before deploying the device in heating, ventilation, or other environmental zones.
پێشنیارکراو
Motor-Control Platforms
The XMC4700F144K2048AAXQMA1 is relevant to industrial motor-control platforms that combine real-time command processing with Ethernet-based commissioning or supervision. Its 144 MHz Cortex-M4 core can execute higher-level control and communication software, and the 2 MB flash capacity can accommodate a larger application than entry-level MCUs. The 144-pin exposed-pad LQFP provides sufficient connectivity for encoder, control, communications, and protection signals. The XMC4700 ecosystem includes the BLDC-SHIELD_IFX007T high-current motor-control board for the XMC4700 Boot Kit, making it a useful reference for motor-control development. Power-stage design still requires separate gate drivers, protection, current sensing, and thermal management; the MCU does not directly replace those power components.
پێشنیارکراو
Embedded Communication Equipment
The XMC4700F144K2048AAXQMA1 fits embedded communication equipment requiring a 32-bit real-time processor and wired network connectivity. Its Arm Cortex-M4 core can handle framing, local control, and protocol processing at 144 MHz, while the Ethernet MAC provides the basis for connected equipment without requiring a separate network controller. The 2 MB flash is useful for protocol stacks, device configuration, and application firmware. In a compact communications product, the 144-pin package permits orderly separation of Ethernet, serial, and digital-control interfaces, although it demands careful two-layer or multilayer layout discipline. Use short return paths, continuous reference planes, controlled impedance routing for Ethernet, and dedicated filtering between external connectors and the MCU. Validate the final interface timing and protocol compliance independently of the MCU selection.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ XMC4700F144K2048AAXQMA1 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | XMC4800F144K2048AAXQMA1 | XMC4700F144F2048AAXQMA1 | XMC4800F144F1536AAXQMA1 |
|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 144-pin LQFP exposed-pad | 144-pin LQFP exposed-pad | 144-pin LQFP exposed-pad | 144-pin LQFP exposed-pad |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 144 MHz | 144 MHz | 144 MHz | 144 MHz |
| Flash Memory | 2 MB (2M × 8 bits) | 2 MB (2M × 8 bits) | 2 MB (2M × 8 bits) | 1536 KB |
| Operating Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Product Family | XMC4000 | XMC4000 | XMC4000 | XMC4000 |
جیاکەرەوە سەرەکییەکان
- Exact 2 MB industrial XMC4700 configuration (بەراورد بەXMC4800F144F1536AAXQMA1)
- Direct family continuity for XMC4700 firmware (بەراورد بەXMC4800F144K2048AAXQMA1)
- Industrial Ethernet-oriented device identity (بەراورد بەXMC4700F144F2048AAXQMA1)
تێبینییەکانی دیزاین
Assign the PCB footprint from the exact Infineon package drawing for PG-LQFP-144-24 rather than from a generic 144-pin LQFP library item. Confirm pad length, exposed-pad dimensions, pin numbering, and the manufacturer's solder-mask and paste-land recommendations. A package that is only dimensionally similar can produce solder defects or an incorrect exposed-pad connection, even when the nominal pin count matches.
Treat the exposed thermal pad as both an electrical connection and a heat-spreading feature. Follow the Infineon datasheet's exposed-pad via pattern and connect the pad to the intended ground plane. Estimate junction rise from actual switching loss, ambient temperature, and the board-dependent thermal resistance before operating continuously at 144 MHz. The board's copper area and thermal vias will materially affect the result and must be included in the thermal assessment.
Place input and bulk-decoupling capacitors close to their associated supply pins, with short ground returns and no plane splits beneath high-current paths. Keep Ethernet and external clock routes away from sensitive sensor or control inputs, and preserve continuous reference planes beneath high-speed nets. Use the manufacturer pin-description table to distinguish analog, digital, and ground pins before finalizing the component placement and net classes.
Do not treat a similar XMC4000 order code as interchangeable solely because it uses the same 144 MHz Cortex-M4 core and exposed-pad LQFP. Compare the ordering-code matrix, flash capacity, peripheral map, pin multiplexing, electrical limits, clock behavior, and errata. In particular, XMC4800F144F1536AAXQMA1 has 1536 KB rather than 2048 KB of flash, so code-size and linker-script changes may be required.
زانیاری پابەندبوون
The target is identified as an industrial MCU, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was established for the exact ordering code.