AD623BN vs AD623ARZ-R7 Comparison
Detailed side-by-side comparison of AD623BN by Analog Devices and AD623ARZ-R7 by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Analog Devices
AD623BN - Low-Cost Rail-to-Rail Instrumentation Amplifier | Analog Devices
AD623BN ✓ ActiveSpecification Comparison
| Parameter | AD623BN | AD623ARZ-R7 |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Unit Price (USD) | — | $2.65 |
| Product Type | Single-channel instrumentation amplifier | — |
| Supply Voltage Range | 2.7 V to 12 V | — |
| Supply Configuration | Single or dual supply | — |
| Output Swing | Rail-to-rail | — |
| Gain Programming | Single external gain-set resistor | — |
| Maximum Input Offset Voltage | 160 uV | — |
| Input Bias Current | 17 nA | — |
| Bandwidth | 800 kHz | — |
| Channel Count | 1 channel | — |
| Package | PDIP-8, plastic | 8-SOIC (0.154 in, 3.90 mm width) |
| Pin Count | 8 pins | — |
| Mounting Type | Through-hole | Surface Mount |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | Extends 150 mV below ground (single supply) |
| Output Voltage Range | [DATA_NEEDED: output voltage range] | — |
| Supply Current | [DATA_NEEDED: supply current] | — |
| Gain Range | [DATA_NEEDED: gain range] | 1 to 1000+ |
| Gain Error | [DATA_NEEDED: gain error] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | — |
| Noise Density | [DATA_NEEDED: input noise density] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 0.3 V/us |
| RoHS Status | Compliant | Compliant |
| Amplifier Type | — | Instrumentation Amplifier |
| Number of Circuits | — | 1 |
| Supply Voltage Range (Single) | — | 2.7 V to 12 V |
| Supply Voltage Range (Dual) | — | +/-2.5 V to +/-6 V |
| Output Type | — | Rail-to-Rail |
| 3 dB Bandwidth | — | 800 kHz |
| CMRR | — | 90 dB (min) at G = 1 |
| Gain Setting | — | Single external resistor, G = 1 + 100 kOhm/RG |
| Operating Temperature | — | -40C to +85C |
| Packaging | — | Tape & Reel (R7) |
| Grade | — | A grade (B grade offers lower offset/drift) |