AD625AD vs AD625JNZ Comparison
Detailed side-by-side comparison of AD625AD by Analog Devices and AD625JNZ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | AD625AD | AD625JNZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | NRND | Active |
| Product Type | Programmable-gain instrumentation amplifier | Single-channel precision instrumentation amplifier |
| Number of Circuits | 1 circuit | — |
| User-Programmed Gain Range | 1 to 10,000 | — |
| Maximum Low-Gain Error | 0.02% max | — |
| Maximum Low-Gain Temperature Coefficient | 5 ppm/°C max | — |
| Maximum Low Nonlinearity | 0.001% max | — |
| Maximum Offset Voltage | 200 µV | — |
| Input Noise Density | 4 nV/√Hz at 1 kHz | 4 nV/√Hz at 1 kHz |
| Gain-Bandwidth Product | 25 MHz | — |
| Bandwidth | 0.65 MHz | — |
| Architecture | Bipolar | — |
| Package | 16-CDIP | 16-pin PDIP |
| Pin Count | 16 pins | — |
| Mounting Type | Through-hole | Through-hole |
| Design Recommendation | Not recommended for new designs | — |
| Data Sheet Revision | Rev. D | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | 0°C to +70°C |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | 30 nA |
| Slew Rate | [DATA_NEEDED: slew rate] | 5 V/µs |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Number of Channels | — | 1 channel |
| Maximum Supply Voltage | — | ±18 V |
| Supported Supply Range | — | -18 V to -6 V or +6 V to +18 V |
| Gain Configuration | — | Programmable with an external resistor |
| Gain Error | — | 0.02% |
| 3 dB Bandwidth | — | 650 kHz |
| Settling Time | — | 15 µs |
| Common-Mode Rejection Ratio | — | 70 dB |
| Supply Current | — | 3.5 mA |
| Gain Drift | — | 50 µV/°C |
| Protection | — | ESD protection |