AD625JNZ vs AD625ADZ Comparison
Detailed side-by-side comparison of AD625JNZ by Analog Devices and AD625ADZ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | AD625JNZ | AD625ADZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Single-channel precision instrumentation amplifier | — |
| Number of Channels | 1 channel | — |
| Maximum Supply Voltage | ±18 V | — |
| Supported Supply Range | -18 V to -6 V or +6 V to +18 V | — |
| Gain Configuration | Programmable with an external resistor | — |
| Gain Error | 0.02% | — |
| 3 dB Bandwidth | 650 kHz | — |
| Slew Rate | 5 V/µs | 5 V/µs |
| Settling Time | 15 µs | — |
| Input Noise Density | 4 nV/√Hz at 1 kHz | 4 nV/√Hz at 1 kHz |
| Input Bias Current | 30 nA | [DATA_NEEDED: input bias current] |
| Common-Mode Rejection Ratio | 70 dB | [DATA_NEEDED: CMRR] |
| Supply Current | 3.5 mA | [DATA_NEEDED: supply current] |
| Gain Drift | 50 µV/°C | — |
| Operating Temperature Range | 0°C to +70°C | [DATA_NEEDED: operating temperature range] |
| Package | 16-pin PDIP | 16-CDIP, 0.300-inch (7.62 mm) width |
| Protection | ESD protection | — |
| Mounting Type | Through-hole | Through-hole |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS status] |
| Amplifier Type | — | Programmable-gain instrumentation amplifier |
| Number of Circuits | — | 1 |
| User-Programmed Gain Range | — | 1 to 10,000 |
| Gain-Bandwidth Product | — | 25 MHz |
| Small-Signal Bandwidth | — | 0.65 MHz |
| Maximum Low Gain Error | — | 0.02% |
| Maximum Low Gain Temperature Coefficient | — | 5 ppm/°C |
| Maximum Low Nonlinearity | — | 0.001% |
| Maximum Offset Voltage | — | 25 µV |
| Packaging | — | Tube |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |