AD626ANZ vs AD626BN Comparison
Detailed side-by-side comparison of AD626ANZ by Analog Devices and AD626BN by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Analog Devices
AD626ANZ - Low-Cost Single-Supply Differential Amp | Analog Devices
AD626ANZ ✓ ActiveSpecification Comparison
| Parameter | AD626ANZ | AD626BN |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Single-supply differential amplifier | True single-supply differential amplifier |
| Number of Amplifier Circuits | 1 circuit | — |
| Single-Supply Operating Voltage | 2.4 V to 10 V | +2.4 V to +10 V |
| Dual-Supply Operating Voltage | ±1.2 V to ±6 V | ±1.2 V to ±6 V |
| Input Offset Voltage | 2.5 mV | — |
| Common-Mode Rejection | 100 dB | — |
| Gain Bandwidth Product | 100 kHz | — |
| Input Common-Mode Range | Approximately 6 × (+VS − 1 V) | Equal to 6 × (VS − 1 V) |
| Operating Temperature Range | -40 °C to 85 °C | -40 °C to +85 °C |
| Package | 8-pin PDIP | 8-pin PDIP |
| Mounting Type | Through-hole | Through-hole |
| Single-Supply Compatibility | True single-supply operation | — |
| Differential Signal Capability | Amplification and low-pass filtering of small differential voltages | — |
| Common-Mode Rejection Function | Rejection of voltage common to both inputs | — |
| RoHS Status | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | not_applicable | — |
| Lead-Free Status | unknown | — |
| Halogen-Free Status | unknown | — |
| Number of Amplifiers | — | 1 circuit |
| Bandwidth | — | 100 kHz |
| Maximum Input Offset Voltage | — | 2.5 mV |
| Pin Count | — | 8 pins |
| Supplier Configuration | — | Tube |
| Gain Configuration | — | [DATA_NEEDED: Gain-setting method and supported gain range] |
| Input Bias Current | — | [DATA_NEEDED: Input bias current] |
| Input Offset Current | — | [DATA_NEEDED: Input offset current] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: Common-mode rejection ratio] |
| Output Voltage Swing | — | [DATA_NEEDED: Output voltage swing] |
| Slew Rate | — | [DATA_NEEDED: Slew rate] |
| Supply Current | — | [DATA_NEEDED: Supply current] |