AD7730BRUZ-REEL7 vs AD7730BRUZ Comparison
Detailed side-by-side comparison of AD7730BRUZ-REEL7 by Analog Devices and AD7730BRUZ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Analog Devices
AD7730BRUZ-REEL7 - 24-Bit Bridge Transducer AFE, 1.2kSPS | ADI
AD7730BRUZ-REEL7 ✓ ActiveAnalog Devices
AD7730BRUZ - 24-Bit Sigma-Delta Bridge Transducer ADC | Analog Devices
AD7730BRUZ ✓ ActiveSpecification Comparison
| Parameter | AD7730BRUZ-REEL7 | AD7730BRUZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Category | ADC/DAC | ADC/DAC |
| Lifecycle Status | Active | Active |
| Product Type | Analog Front End (AFE) / Sigma-Delta ADC | — |
| Resolution | 24 bit | 24-bit (up to 230,000 counts peak-to-peak) |
| Number of Channels | 1 channel AFE | 1 differential (2 buffered inputs) |
| Maximum Output Data Rate | 1.2 kSPS | — |
| Supply Voltage | +5 V (single supply, 4.75 V to 5.25 V) | +4.75 V to +5.25 V (single +5 V) |
| Power Dissipation | 125 mW | — |
| Unipolar Input Ranges | 0 to +10 mV, +20 mV, +40 mV, +80 mV | — |
| Bipolar Input Ranges | ±10 mV, ±20 mV, ±40 mV, ±80 mV | — |
| Programmable Gain | Up to 128 | — |
| Analog Inputs | 2 buffered differential inputs | — |
| Reference Input | Differential | Differential |
| Serial Interface | 3-wire SPI/serial, microcontroller and DSP compatible | — |
| Calibration | Self-calibration and system-calibration | On-chip self-calibration and system calibration |
| Offset Drift | < 5 nV/°C | 5 nV/C (max) |
| Gain Drift | < 2 ppm/°C | 2 ppm/C (max) |
| Operating Temperature | -40 °C to +85 °C | -40 C to +85 C |
| Package | 24-pin TSSOP (4.40 mm body width) | 24-lead TSSOP (RU-24) |
| Mounting Type | Surface Mount | Surface Mount |
| Packaging | Tape & Reel (REEL7, 7-inch) | — |
| RoHS Status | Compliant | Compliant |
| Manufacturer | — | Analog Devices |
| Part Number | — | AD7730BRUZ |
| Function | — | 24-bit sigma-delta analog front end for bridge transducers |
| Throughput | — | [DATA_NEEDED: word rate] |
| Typical Power Dissipation | — | 125 mW |
| Analog Input Ranges (Unipolar) | — | 0 to +10 mV, 0 to +20 mV, 0 to +40 mV, 0 to +80 mV |
| Analog Input Ranges (Bipolar) | — | +/-10 mV, +/-20 mV, +/-40 mV, +/-80 mV |
| Line-Frequency Rejection | — | >150 dB |
| Digital Interface | — | Serial, compatible with microcontrollers and DSPs (3-wire mode) |
| Storage Temperature | — | [DATA_NEEDED: storage temperature range] |
| MSL Level | — | [DATA_NEEDED: MSL rating] |
| Lead-Free | — | Yes |
| AEC-Q100 | — | Not qualified (industrial grade only) |