AD842KH vs AD842KN Comparison
Detailed side-by-side comparison of AD842KH by Analog Devices and AD842KN by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | AD842KH | AD842KN |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Single-channel operational amplifier | — |
| Gain-Bandwidth Product | 80 MHz at gain of 2 | 80 MHz |
| Slew Rate | 375 V/µs | [DATA_NEEDED: slew rate] |
| Settling Time | 0.01% settling for a 10 V step | — |
| Full-Power Bandwidth | 6.0 MHz at 20 V peak-to-peak output | [DATA_NEEDED: full-power bandwidth] |
| Maximum Input Offset Voltage | 1 mV | — |
| Offset Voltage Listing Value | 1.5 mV | — |
| Minimum Stable Gain | 2 | — |
| Input Bias Current | 8 µA | [DATA_NEEDED: input bias current] |
| Package | TO-8-12 | — |
| Process Technology | Junction-isolated complementary bipolar (CB) process | Junction-isolated complementary bipolar (CB) process |
| Number of Channels | 1 channel | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | ±5 V to ±18 V |
| Output Current Capability | [DATA_NEEDED: output current rating] | — |
| Input Offset Drift | [DATA_NEEDED: input offset voltage drift] | — |
| Input Noise Voltage | [DATA_NEEDED: input noise voltage] | — |
| Total Harmonic Distortion | [DATA_NEEDED: total harmonic distortion] | — |
| RoHS Status | [DATA_NEEDED: RoHS compliance status] | unknown |
| REACH Status | [DATA_NEEDED: REACH compliance status] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Product Type | — | Wideband operational amplifier |
| Amplifier Architecture | — | Current-feedback amplifier |
| Number of Circuits | — | 1 amplifier |
| Package Type | — | 14-pin PDIP |
| Package Dimensions | — | 0.300 inch (7.62 mm) body width |
| Mounting Type | — | Through-hole |
| Input Offset Voltage | — | 1500 uV maximum |
| Supply Current | — | 6 uA typical |
| Input Noise Current | — | 3.5 uA |
| Common-Mode Rejection | — | 115 dB |
| Output Current | — | [DATA_NEEDED: maximum output current] |