AD9280ARSZRL vs AD9280ARSZ Comparison
Detailed side-by-side comparison of AD9280ARSZRL by Analog Devices and AD9280ARSZ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | AD9280ARSZRL | AD9280ARSZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Category | ADC/DAC | ADC/DAC |
| Lifecycle Status | Active | Active |
| Converter Type | Pipelined ADC | — |
| Resolution | 8 bit | 8 bits |
| Sampling Rate | 32 MSPS | — |
| Number of Inputs | 1 analog input | — |
| Supply Voltage | 2.7 V to 5.5 V | — |
| Analog Input Configuration | Single-ended or differential | — |
| Sample-and-Hold Amplifier | Onboard, 300 MHz | — |
| Internal Voltage Reference | Integrated | — |
| Data Interface | Parallel CMOS | CMOS / TTL, parallel output |
| Architecture | Multistage differential pipeline | Pipelined CMOS ADC with on-chip SHA and reference |
| Pin Compatibility | Pin compatible with AD876-8 | Pin-compatible with AD876-8 |
| Package | 28-lead SSOP, 0.209 inch width, 5.30 mm width | 28-lead SSOP (RSZ) |
| Packaging | Tape and reel | — |
| Power Dissipation | 80 mW at 3 V supply | — |
| Reference Output | Voltage reference output | — |
| Out-of-Range Indicator | Available | Yes (OTR flag) |
| Missing Codes | Guaranteed no missing codes over the full operating temperature | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Operating Temperature | [DATA_NEEDED: operating temperature range] | -40 C to +85 C |
| MSL | [DATA_NEEDED: moisture sensitivity level] | — |
| Standardized Quantity | [DATA_NEEDED: reel quantity] | — |
| Number of Channels | — | 1 input, single channel |
| Sample Rate (Max) | — | 32 MSPS |
| Input Type | — | Single-ended or differential (configurable via SHA) |
| Analog Supply Range | — | 2.7 V to 5.5 V |
| Digital Supply Range | — | 2.7 V to 5.5 V |
| Power Dissipation (3 V supply) | — | 80 mW typical |
| Power Dissipation (5 V supply) | — | 95 mW typical |
| Sample-and-Hold Bandwidth | — | 300 MHz (onboard SHA) |
| Differential Nonlinearity (DNL) | — | 0.5 LSB (typical) |
| Integral Nonlinearity (INL) | — | [DATA_NEEDED: typical INL value] |
| Signal-to-Noise Ratio (SNR) | — | [DATA_NEEDED: SNR value at Nyquist] |
| On-Chip Voltage Reference | — | Yes (internal 2.5 V) |
| Mounting Type | — | Surface Mount |
| Lead Free | — | Yes |