ADC08832IM vs ADC08831IMX Comparison

Detailed side-by-side comparison of ADC08832IM by Texas Instruments and ADC08831IMX by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Texas Instruments
ADC08831IMX ADC08831IMX - 8-Bit Serial ADC 1-Ch 8-SOIC | Texas Instruments

ADC08831IMX - 8-Bit Serial ADC 1-Ch 8-SOIC | Texas Instruments

ADC08831IMX ✓ Active

Specification Comparison

Parameter ADC08832IM ADC08831IMX
Brand Texas Instruments Texas Instruments
Category ADC/DAC ADC/DAC
Lifecycle Status NRND Active
Stock Status In Stock In Stock
Unit Price (USD) $1.08 $0.78
Resolution 8 bits 8 bit
Architecture Successive Approximation (SAR) —
Number of Inputs 2 (configurable, single-ended/differential) —
Conversion Time Max 4 us (fC = 2 MHz) —
Supply Voltage [DATA_NEEDED: nominal VCC range] —
Analog Input Range GND to VCC —
Input Type Single-ended or differential with MUX —
Sample and Hold Internal, on-chip —
Data Interface 3-wire serial (CS, CLK, DO) - SPI/QSPI/MICROWIRE compatible MICROWIRE-compatible 3-wire serial (CS, SCLK, DOUT)
Clock Frequency Max 2 MHz (fC) —
Power Dissipation 8.5 mW (typical) —
Digital I/O Logic Levels TTL/CMOS compatible —
Operating Temperature Range -40 C to +85 C —
Package 8-SOIC (0.150 inch, SO Wide) —
Pin Count 8 —
Mounting Type Surface Mount Surface Mount
RoHS Status [DATA_NEEDED: per TI product page - IM suffix typically non-RoHS; IM/NOPB is Pb-free] Compliant
Reference / Transfer Ratio 1 LSB = VREF/256 (ratiometric to VCC) —
Manufacturer — Texas Instruments
Part Number — ADC08831IMX
Number of Input Channels — 1 (2:1 MUX on chip)
Converter Architecture — SAR (Successive Approximation Register)
Sampling Rate (Max) — 181 kSPS
Analog Supply Voltage — 4.5 V to 6.5 V
Digital Supply Voltage — 4.5 V to 6.5 V
Input Voltage Range — 0 V to VCC (with internal input clamps)
Package / Case — 8-SOIC (0.154 in / 3.90 mm width)
Operating Temperature — -40 C to +85 C
Sample-and-Hold — On-chip
MSL Level — 1 (per JEDEC J-STD-020)

Datasheets & Resources

Browse All Products Create BOM Request Quote