ADM202EAN vs ADM202JNZ Comparison
Detailed side-by-side comparison of ADM202EAN by Analog Devices and ADM202JNZ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Analog Devices
ADM202EAN - Dual RS-232 Driver/Receiver, 5V, 16-PDIP | Analog Devices
ADM202EAN ✓ ActiveSpecification Comparison
| Parameter | ADM202EAN | ADM202JNZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Number of Channels | 2 channels | — |
| Interface Type | RS-232 line driver/receiver | — |
| Supply Voltage | 5 V | — |
| Data Rate | 230 kbit/s | — |
| RS-232 Output Levels | ±10 V | — |
| Charge-Pump Capacitor Value | 0.1 µF minimum | 0.1 µF |
| RS-232 Compliance | TIA/EIA-232-E and V.28 | — |
| ESD Protection, Contact | 8 kV | — |
| ESD Protection, Air Gap | 15 kV | — |
| ESD Protection, Human Body Model | 15 kV | — |
| EMC Directive | 89/336/EEC | — |
| Fast Transient Burst Immunity | IEC 61000-4-4 | — |
| EMI Emissions Reference | EN 55022 | — |
| Package | 16-pin PDIP | 16-pin PDIP, 0.300 inch body width, 7.62 mm lead pitch |
| Mounting Type | Through-hole | Through-hole |
| Supply Configuration | Single 5 V supply | — |
| Driver Slew Rate | [DATA_NEEDED: driver slew rate] | — |
| Receiver Propagation Delay | [DATA_NEEDED: receiver propagation delay] | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| Transceiver Configuration | — | 2 drivers and 2 receivers |
| Maximum Transmission Rate | — | 120 kbit/s |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Nominal Supply Voltage | — | 5 V |
| RS-232 Output Level | — | Approximately ±10 V |
| Receiver Input Voltage Tolerance | — | ±30 V |
| Supply Current | — | 2.5 mA |
| Interface Standard | — | TIA/EIA-232-E and V.28 |
| Technology | — | BiCMOS |
| Shipping Package | — | Tube |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |