ADM483JR vs ADM485ARZ Comparison
Detailed side-by-side comparison of ADM483JR by Analog Devices and ADM485ARZ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ ActiveSpecification Comparison
| Parameter | ADM483JR | ADM485ARZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.68 | $1.62 |
| Product Type | Low-power differential line transceiver | — |
| Supply Voltage | 5 V | 5 V (single supply) |
| Data Rate | Up to 250 kbps | 5 Mbps (max) |
| Communication Standard | EIA RS-485/RS-422 compliant | — |
| Operating Mode | Half-duplex | — |
| Typical Operating Supply Current | 120 µA | — |
| Shutdown Supply Current | 100 nA | — |
| Bus Common-Mode Range | -7 V to +12 V | — |
| Maximum Transceivers on One Bus | 32 transceivers | — |
| Output State When Disabled or Powered Off | High impedance | — |
| Slew Rate | Limited for low EMI | — |
| Protection | Thermal shutdown and short-circuit protection | — |
| Pin Compatibility | Pin-compatible with MAX483 | — |
| Operating Temperature Range | -40°C to +85°C | -40 C to +85 C |
| Package | 8-lead SOIC, 3.90 mm width | SOIC-8 (SO-8) / SO-8 |
| Mounting Type | Surface mount | Surface Mount |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | Unaffected |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Type | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| MSL Level | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |