ADS7805PB vs IDTADC1207S080HW-C2 Comparison
Detailed side-by-side comparison of ADS7805PB by Texas Instruments and IDTADC1207S080HW-C2 by Renesas Electronics. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
ADS7805PB - 16-Bit 100kHz SAR ADC, ±10V, 28-PDIP | Texas Instruments
ADS7805PB ✓ ActiveRenesas Electronics
IDTADC1207S080HW-C2 - 12-Bit 80MSPS Flash ADC | 48-HTQFP
IDTADC1207S080HW-C2 ✓ ActiveSpecification Comparison
| Parameter | ADS7805PB | IDTADC1207S080HW-C2 |
|---|---|---|
| Brand | Texas Instruments | Renesas Electronics |
| Category | ADC/DAC | ADC/DAC |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $10.95 | $9.95 |
| Resolution | 16 bit | 12 bit |
| Number of Channels | 1 | 1 |
| Converter Type | SAR (Successive Approximation Register) | — |
| Sampling Rate (min) | 100 kHz | — |
| Conversion Time (typ) | 10 µs | — |
| Analog Input Range | ±10 V (bipolar) or 0 V to 4 V (unipolar) | — |
| SINAD (min) | 86 dB at 20 kHz input | — |
| Input Sample-and-Hold | On-chip, capacitor-based | — |
| Reference | Internal 2.5 V with option for external reference | — |
| Output Interface | 16-bit parallel, 3-state outputs | — |
| Clock | Internal (external option available) | — |
| Supply Voltage (analog) | ±5 V dual or +5 V single | — |
| Package | 28-pin PDIP (N) | 48-HTQFP (7x7 mm) |
| Mounting Type | Through-Hole | Surface Mount |
| Operating Temperature | -40 °C to +85 °C | — |
| RoHS Status | Compliant | [DATA_NEEDED: explicit compliance statement not in verified web data] |
| Sampling Rate | — | 80 MSPS |
| Architecture | — | Flash |
| Input Type | — | Differential |
| Data Interface | — | Parallel |
| Configuration | — | S/H-ADC |
| Operating Temperature Range | — | [DATA_NEEDED: not stated in verified web data] |
| Supply Voltage | — | [DATA_NEEDED: AVDD/DVDD nominal not stated in verified web data] |
| Input Voltage Range (FS) | — | [DATA_NEEDED: full-scale input range not stated in verified web data] |
| SNR | — | [DATA_NEEDED: signal-to-noise ratio not stated in verified web data] |
| ENOB | — | [DATA_NEEDED: effective number of bits not stated in verified web data] |
| Power Consumption | — | [DATA_NEEDED: power dissipation not stated in verified web data] |
| Reference Type | — | External (per typical flash-ADC topology) |
| A/D Converters Quantity | — | 1 |