ADV7392BCPZ vs ADV7393WBCPZ Comparison

Detailed side-by-side comparison of ADV7392BCPZ by Analog Devices and ADV7393WBCPZ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Analog Devices
ADV7393WBCPZ ADV7393WBCPZ - 10-Bit SD/HD Video Encoder | Analog Devices (Tape & Reel)

ADV7393WBCPZ - 10-Bit SD/HD Video Encoder | Analog Devices (Tape & Reel)

ADV7393WBCPZ ⚠ Last Time Buy

Specification Comparison

Parameter ADV7392BCPZ ADV7393WBCPZ
Brand Analog Devices Analog Devices
Category Video ICs Video ICs
Lifecycle Status NRND Last Time Buy
Product Type 10-bit SD/HD video encoder IC Video Encoder IC (10-bit SD/HD)
Video Resolution Support Standard Definition and High Definition —
Video DAC Resolution 10 bit —
Number of Video DACs 3 —
DAC Supply Voltage Options 2.7 V or 3.3 V —
Supported Video Output Composite CVBS and S-Video —
Architecture Monolithic high-speed digital-to-analog video encoder —
Package 40-LFCSP-WQ (6 mm x 6 mm) 40-pin LFCSP-WQ (6x6 mm)
Mounting Type Surface mount Surface Mount
Lifecycle Recommendation Not recommended for new designs —
Synchronization Output Tri-level sync —
Input Timing Reference HSYNC —
Pipeline Delay [DATA_NEEDED: pipeline delay] —
Maximum Pixel Clock [DATA_NEEDED: maximum pixel clock] —
Operating Temperature Range [DATA_NEEDED: operating temperature range] -40 C to +105 C
Digital Input Interface [DATA_NEEDED: digital video input interface] —
Power Consumption [DATA_NEEDED: power consumption] —
Maximum Video Output Voltage [DATA_NEEDED: maximum video output voltage] —
Video Output Impedance [DATA_NEEDED: video output impedance] —
RoHS Status unknown Compliant
REACH Status unknown —
AEC-Q100 Qualification unknown —
Number of DACs — 3 (10-bit each)
Resolution — 10-bit
Video Standards — SD (NTSC/PAL), HD (720p/1080i)
Output Formats — Composite (CVBS), S-Video (Y-C), Component (YPrPb)
Digital I/O Supply Voltage — 1.8 V or 3.3 V
Analog/DAC Supply Voltage — 2.7 V / 3.3 V
Maximum DAC Sample Rate — 80 MHz
Host Interface — 8/16/24-bit parallel (ITU-R BT.656 / BT.1120)
Control Interface — I2C-compatible (2-wire serial)
Input Clock — 27 MHz crystal or external clock
MSL (Moisture Sensitivity Level) — [DATA_NEEDED: MSL level per JEDEC J-STD-020]

Datasheets & Resources

Browse All Products Create BOM Request Quote