ATMEGA329P-20AU vs ATMEGA325P-20AUR Comparison

Detailed side-by-side comparison of ATMEGA329P-20AU by Microchip Technology and ATMEGA325P-20AUR by Microchip Technology. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Microchip Technology
ATMEGA329P-20AU ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64

ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64

ATMEGA329P-20AU βœ“ Active
Microchip Technology
ATMEGA325P-20AUR ATMEGA325P-20AUR - 8-bit AVR MCU 32KB 20MHz | Microchip

ATMEGA325P-20AUR - 8-bit AVR MCU 32KB 20MHz | Microchip

ATMEGA325P-20AUR βœ“ Active

Specification Comparison

Parameter ATMEGA329P-20AU ATMEGA325P-20AUR
Brand Microchip Technology Microchip Technology
Category Microcontrollers Microcontrollers
Lifecycle Status Active Active
Stock Status In Stock In Stock
Unit Price (USD) $4.71 $4.11
Core Architecture AVR (8-bit RISC, Harvard) AVR 8-bit RISC
Instruction Set 131 instructions, mostly single-cycle β€”
Program Memory (Flash) 32 KB (16K x 16), In-System Programmable with RWW β€”
EEPROM 1 KB 1 KB
SRAM 2 KB (2K x 8) 2 KB
Maximum Clock Speed 20 MHz β€”
Throughput Up to 20 MIPS at 20 MHz Up to 20 MIPS at 20 MHz
Supply Voltage (Vcc) 2.7 V to 5.5 V (10 MHz max below 4.5 V; 20 MHz requires 4.5-5.5 V) β€”
General-Purpose I/O Pins 54 β€”
General-Purpose Working Registers 32 β€”
ADC 10-bit, up to 8 single-ended channels 8-channel, 10-bit
PWM Channels 6 β€”
Communication Peripherals 2x USART, 1x TWI (I2C), 1x SPI (also ISP) β€”
Debug Interface JTAG (IEEE 1149.1 compliant) JTAG (on-chip debug and boundary scan)
Package 64-pin TQFP (14x14 mm, 0.8 mm pitch) 64-TQFP (14x14 mm)
Operating Temperature -40C to +85C (industrial, -A suffix) -40C to +85C (industrial)
Mounting Type Surface Mount Surface Mount
RoHS Status Compliant (Pb-free / Green) Compliant
Power-Save Modes Idle, ADC Noise Reduction, Power-save, Power-down, Standby, Extended Standby (picoPower) β€”
QTouch Support Yes (peripheral touch controller via library) β€”
CPU Speed β€” 20 MHz
Flash Program Memory β€” 32 KB (16K x 16)
Supply Voltage Range β€” 1.8 V to 5.5 V
Instructions β€” 131 powerful instructions, most single-cycle
I/O Lines β€” 54 general-purpose I/O
Low Power Technology β€” picoPower
Programming β€” In-System Programmable (ISP) Flash

Datasheets & Resources

Browse All Products Create BOM Request Quote