ATMEGA8515-16PJ vs ATMEGA8515L-8PI Comparison

Detailed side-by-side comparison of ATMEGA8515-16PJ by Microchip Technology and ATMEGA8515L-8PI by Microchip Technology. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Microchip Technology
ATMEGA8515-16PJ ATMEGA8515-16PJ - 8-Bit AVR MCU 16MHz 8KB Flash | Microchip

ATMEGA8515-16PJ - 8-Bit AVR MCU 16MHz 8KB Flash | Microchip

ATMEGA8515-16PJ ✓ Active
Microchip Technology
ATMEGA8515L-8PI ATMEGA8515L-8PI - 8-bit AVR MCU 8KB Flash 40-DIP | Microchip

ATMEGA8515L-8PI - 8-bit AVR MCU 8KB Flash 40-DIP | Microchip

ATMEGA8515L-8PI ✓ Active

Specification Comparison

Parameter ATMEGA8515-16PJ ATMEGA8515L-8PI
Brand Microchip Technology Microchip Technology
Category Microcontrollers Microcontrollers
Lifecycle Status Active Active
Stock Status In Stock In Stock
Unit Price (USD) $2.99 $3.45
Core Architecture 8-bit AVR RISC 8-bit AVR enhanced RISC
Maximum Clock Frequency 16 MHz 8 MHz
Throughput 16 MIPS at 16 MHz Up to 8 MIPS at 8 MHz
Flash Program Memory 8 KB (4K x 16) 8 KB (4K x 16), In-System Programmable
SRAM 512 B —
EEPROM 512 B 512 B
External Memory Support up to 64 KB SRAM Up to 64 KB SRAM
General Purpose I/O 35 lines 35 programmable I/O lines
Working Registers 32 x 8-bit —
Instruction Set 130 instructions, most single-cycle 130 instructions, most single-cycle
Timers/Counters Two flexible with compare modes + 8-bit Timer0 (OC0/PWM) —
Communication Interfaces UART, SPI —
Interrupts Internal and external interrupt sources —
Package 40-PDIP 40-PDIP (0.600 in, 15.24 mm)
Mounting Type Through Hole Through Hole
Operating Temperature [DATA_NEEDED: operating temperature range] -40C to +85C (Industrial)
Supply Voltage Range [DATA_NEEDED: supply voltage range for -16PJ grade] —
RoHS Status [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status]
Internal SRAM — 512 B
Operating Voltage Range — 2.7 V to 5.5 V
Timers — One 16-bit (T1) and 8-bit Timer/Counters
Serial Interfaces — 1x USART, 1x SPI
External Interrupts — 3 (INT0-INT2)
Internal ADC — No
Debug/Programming — ISP via SPI; debug via MPLAB SNAP
Supply Current (Active) — [DATA_NEEDED: active supply current]

Datasheets & Resources

Browse All Products Create BOM Request Quote