ATMEGA8A-AU vs ATMEGA8-16AI Comparison

Detailed side-by-side comparison of ATMEGA8A-AU by Microchip Technology and ATMEGA8-16AI by Microchip Technology. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Microchip Technology
ATMEGA8A-AU ATMEGA8A-AU - AVR 8-bit MCU 16MHz 8KB Flash TQFP-32 | Microchip

ATMEGA8A-AU - AVR 8-bit MCU 16MHz 8KB Flash TQFP-32 | Microchip

ATMEGA8A-AU ✓ Active
Microchip Technology
ATMEGA8-16AI ATMEGA8-16AI - 8-Bit AVR MCU 16MHz 8KB Flash | Microchip

ATMEGA8-16AI - 8-Bit AVR MCU 16MHz 8KB Flash | Microchip

ATMEGA8-16AI Obsolete

Specification Comparison

Parameter ATMEGA8A-AU ATMEGA8-16AI
Brand Microchip Technology Microchip Technology
Category Microcontrollers Microcontrollers
Lifecycle Status Active Obsolete
Stock Status In Stock In Stock
Unit Price (USD) $1.31 $2.46
Core Architecture 8-bit AVR RISC —
Maximum Clock Frequency 16 MHz 16 MHz
Flash Program Memory 8 KB (4K x 16) —
EEPROM 512 B 512 Bytes
SRAM 1 KB 1 KB
I/O Pins 23 —
Supply Voltage Range 4.5 V to 5.5 V (at 16 MHz) —
Throughput Up to 16 MIPS at 16 MHz Up to 16 MIPS at 16 MHz
Instructions 130 instructions, most single-cycle —
Hardware Multiplier On-chip 2-cycle multiplier —
ADC 10-bit, 6 multiplexed channels (8 on TQFP/QFN incl. ADC6/ADC7) 10-bit, 6 or 8 channels, 15 kSPS
Communication Interfaces 1x USART, SPI, TWI (I2C) —
Timers 2x 8-bit, 1x 16-bit timer/counter Two 8-bit, one 16-bit with separate prescaler
Analog Comparator Yes, on-chip —
Flash Endurance 10,000 write cycles 10,000 write/erase cycles
EEPROM Endurance 100,000 write cycles —
Package 32-TQFP (7x7 mm, 0.8 mm pitch) 32-TQFP (7x7 mm)
Mounting Type Surface Mount Surface Mount
Programming / Debug In-Circuit Serial Programming (ICSP) via SPI, MPLAB SNAP supported —
Lifecycle Status Active —
Core Processor — AVR 8-bit RISC
Program Memory Size — 8 KB (4K x 16) Flash
Program Memory Type — In-System Programmable Flash
Operating Voltage Range — 2.7 V to 5.5 V
Speed Grade Voltage — 16 MHz at 4.5 V to 5.5 V
Instruction Set — 130 powerful instructions, most single-clock cycle
General Purpose Working Registers — 32 x 8-bit
I/O Lines — 32 programmable I/O lines
Serial Interfaces — USART, SPI, Two-wire (I2C-compatible)
Internal Oscillator — Calibrated RC oscillator
Operating Temperature — -40C to +85C
RoHS Status — Compliant

Datasheets & Resources

Browse All Products Create BOM Request Quote