BSP452 vs BSP452HUMA1 Comparison
Detailed side-by-side comparison of BSP452 by Infineon and BSP452HUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | BSP452 | BSP452HUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.78 | $0.78 |
| Product Type | Smart High-Side Power Switch (Classic PROFET 12V) | Smart High-Side Power Switch |
| Technology | N-channel vertical power FET with charge pump (Smart SIPMOS) | — |
| Number of Channels | 1 | 1 |
| Input Compatibility | CMOS compatible logic-level input, ground referenced | — |
| Nominal Load Current | 1.1 A | — |
| DC Continuous Load Current (DigiKey listing) | 700 mA | — |
| Supply Voltage (Vbb) | 60 V max (avalanche rated) | — |
| On-Resistance (Rds(on)) | [DATA_NEEDED: typical Rds(on) in mOhm] | — |
| Operating Temperature Range | [DATA_NEEDED: Tj range, likely -40C to +150C for automotive] | — |
| Package | PG-SOT223-4 (4-pin SOT-223 with tab) | PG-SOT223-4 (3+Tab) |
| Mounting Type | Surface Mount | Surface Mount |
| Diagnostic Feedback | Yes (status output) | — |
| Protection Features | Over-temperature, over-voltage (clamping), ESD, current limit, reverse battery | — |
| ESD Rating (HBM, per datasheet) | Tested per MIL-STD-883D Method 3015.7 | — |
| Load Dump Protection | Per ISO 7637-1 and DIN 40839 | — |
| Lead-Free / RoHS | Yes (Infineon standard) | — |
| Family | — | Classic PROFET 12V |
| Switch Type | — | N-Channel (integrated vertical power FET) |
| Operating Supply Voltage | — | 5 V to 34 V |
| Continuous Load Current | — | 700 mA |
| On-State Resistance (RDS(on)) | — | 0.16 ohm (typical) |
| Automotive Qualification | — | AEC-Q100 qualified |
| Short-Circuit Protection | — | Yes (integrated) |
| Overvoltage Protection | — | Yes (clamp) |
| Overtemperature Protection | — | Yes (shutdown with hysteresis) |
| Overload Protection | — | Yes |
| ESD Protection | — | Yes (input pin) |
| Inductive Load Switching | — | Yes (with negative output clamp) |
| Operating Temperature | — | -40 C to +150 C (junction) |
| MSL Level | — | 1 (per JEDEC J-STD-020) |
| RoHS Status | — | Compliant |