BTS50301EJAXUMA1 vs BTS3060TFATMA1 Comparison
Detailed side-by-side comparison of BTS50301EJAXUMA1 by Infineon and BTS3060TFATMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | BTS50301EJAXUMA1 | BTS3060TFATMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Product Type | Smart High-Side Power Switch (PROFET) | Smart Low-Side Power Switch |
| Number of Channels | 1 | 1 |
| Switch Type | N-Channel | — |
| On-State Resistance (RDS(on)) | 30 mΩ typical at 25 °C | — |
| Continuous Load Current | 5 A | — |
| Nominal Supply Voltage | 28 V | — |
| Operating Supply Range | 5 V to 28 V | — |
| Load Voltage Range | 8 V to 18 V | — |
| Reverse Battery Protection | -28 V | — |
| PWM Frequency (max) | 1 kHz | — |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO | — |
| Diagnostic Output | IS current sense pin | Status pin (open-drain, requires pull-up) |
| Package | PG-DSO-8-43-EP | PG-TO252-3 (DPAK), 3 pins (2+Tab) |
| Mounting Type | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 | AEC-Q100 qualified |
| Thermal Resistance (θJA) | approximately 36 K/W (1s2p FR4 board) | — |
| Manufacturer Family | — | HITFET |
| On-Resistance (RDS(on) typ) | — | 50 mΩ at 25°C |
| Maximum Continuous Load Current | — | 3 A |
| Maximum Load Supply Voltage | — | 42 V |
| Transistor Type | — | N-Channel Vertical Power MOSFET (monolithically integrated) |
| Switch Configuration | — | Low-Side, 1:1 |
| Input Type | — | Logic-level gate input (3.3V / 5V compatible) |
| Embedded Protection | — | Overcurrent, Overtemperature, Overvoltage, Open-load detection |
| Operating Temperature Range | — | -40°C to +150°C (junction) |
| Packaging | — | Tape & Reel (TF suffix) |
| RoHS Status | — | Compliant |