BTS70082EPAXUMA1 vs BTS441RGATMA1 Comparison

Detailed side-by-side comparison of BTS70082EPAXUMA1 by Infineon and BTS441RGATMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Specification Comparison

Parameter BTS70082EPAXUMA1 BTS441RGATMA1
Brand Infineon Infineon
Category Power MOSFET Drivers Power MOSFET Drivers
Lifecycle Status Active Active
Product Family PROFET+2 (12 V, dual channel) —
Switch Type High-side N-channel MOSFET switch 1:1 N-Channel High-Side
Number of Channels 2 —
On-Resistance (RDS(on)) per channel 16 mΩ typical (8 mΩ channel-on resistance per channel pair) —
Continuous Load Current per channel 7.5 A —
Nominal Supply Voltage 12 V —
Operating Supply Voltage Range 3.1 V to 28 V —
Load Dump / Transient Tolerance 42 V per ISO 7637-2 —
Reverse Battery Protection -16 V —
Standby Current [DATA_NEEDED: standby current uA] —
Current Sense (IS) Ratio kILIS 5000 (typical) —
Protection Features Overtemperature shutdown, overcurrent, short to ground, short to VS, open load, ground loss —
Diagnostic Output Current-sense (IS) pin, analog/digital —
Operating Junction Temperature -40 °C to +150 °C —
Package PG-TSDSO-14-22 (TSSOP-14 EP, 14-pin thermal-pad SMD) PG-TO263-5-2 (TO-263-5)
AEC-Q100 Qualification Yes (Automotive Grade) —
Mounting Type Surface Mount Surface Mount
MSL Level MSL3 (per JEDEC J-STD-020) —
RoHS Status Compliant Compliant
Manufacturer — Infineon Technologies AG
Part Number — BTS441RGATMA1
Number of Outputs — 1
Continuous Load Current — 17 A
Topology — Smart High-Side Switch
Input Type — CMOS-compatible, ground referenced
Diagnostics — Yes (fault feedback)
Technology — Smart SIPMOS (N-channel vertical FET + charge pump)
Number of Pins — 5
Operating Voltage Range — [DATA_NEEDED: Vbb range, e.g. 6V-42V]
On-State Resistance (Rds(on)) — [DATA_NEEDED: Rds(on) at 25 C]
Over-Current Protection — Yes (integrated)
Thermal Protection — Yes (overtemperature shutdown)
Over-Voltage Protection — Yes (inductive load clamping)
Automotive Qualified — Yes (AEC-Q100 automotive grade)
Tape and Reel Quantity — 1000 (per reel)

Datasheets & Resources

Browse All Products Create BOM Request Quote