BTS70202EPAXUMA1 vs BTS72002EPAXUMA1 Comparison
Detailed side-by-side comparison of BTS70202EPAXUMA1 by Infineon and BTS72002EPAXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | BTS70202EPAXUMA1 | BTS72002EPAXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Product Type | Smart High-Side Power Switch (dual channel) | Smart High-Side Power Switch (PROFET+2) |
| Technology | SMART7 (PROFET family) | — |
| Number of Channels | 2 | 2 |
| Output Configuration | High-side, 1:1 N-Channel MOSFET per channel | — |
| Continuous Load Current (per channel) | 2.5 A | — |
| Total Device Load Current | 5 A | — |
| On-State Resistance (typ, per channel) | 30 mΩ | — |
| Operating Voltage Range (Vbb) | 6 V to 18 V (load dump tolerant) | — |
| Current Limit (typ) | 12 A (selectable) | — |
| Diagnostic Output | Analog current sense (IS pin) per channel | Current sense IS pin (analog) |
| Protection Features | Over-current, short-circuit, over-temperature, over-voltage, reverse battery, loss of ground | Over-current, short-circuit, over-temperature, over-voltage, reverse polarity |
| Input Logic Compatibility | 3.3 V and 5 V CMOS | — |
| Package | PG-TSDSO-14-22 (exposed pad) | PG-TSDSO-14 (14-pin TSSOP with exposed pad) |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature Range | -40 C to +150 C (junction) | — |
| Packing | Tape & Reel (XUMA1 suffix) | — |
| RoHS Status | Compliant | Compliant |
| Topology | — | 2 x High-Side N-Channel (2:1 outputs) |
| On-State Resistance (RDS(on)) | — | 66.5 mOhm per channel (typical) |
| Continuous Load Current | — | 1.2 A per channel |
| Current Limit | — | 0.8 V to 1.2 A (adjustable) |
| Operating Voltage (VS) | — | 6 V to 18 V nominal, up to 28 V extended |
| Reverse Battery Capability | — | Yes, down to -28 V |
| Standby Current | — | [DATA_NEEDED: standby current in uA] |
| Operating Temperature | — | -40 C to +150 C junction |
| Automotive Qualification | — | AEC-Q100 |
| MSL Level | — | 2A (4 weeks) |