BTS70402EPGXUMA1 vs 2ED2410EMXUMA1 Comparison
Detailed side-by-side comparison of BTS70402EPGXUMA1 by Infineon and 2ED2410EMXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | BTS70402EPGXUMA1 | 2ED2410EMXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Manufacturer | Infineon Technologies | — |
| Part Family | PROFET+2 (BTS70xxx series) | — |
| Function | Smart High-Side Power Switch | — |
| Number of Channels | 4 | — |
| Output Configuration | High-side, N-channel MOSFET | — |
| Continuous Load Current per Channel | 3.5 A (typical) | — |
| On-State Resistance (Ron) per Channel | 65 mOhm typical | — |
| Operating Voltage Range | 6 V to 18 V nominal (load-dump tolerant to 40 V) | — |
| Logic Supply Voltage | 3.3 V / 5 V compatible MCU I/O | — |
| Protection Features | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection | Enable/Shutdown, Overcurrent Protection (OCP), Interleaved Conduction Protection, Charge Pump |
| Diagnostic Interface | SPI status register, current-sense feedback | — |
| Operating Temperature Range | -40 °C to +150 °C junction | -40 °C to +150 °C |
| Package | PG-TSDSO-14 (exposed thermal pad) | PG-TSDSO-24 (exposed pad) |
| Mounting Type | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS Compliance | Compliant | — |
| Driver Type | — | High-Side N-Channel MOSFET Gate Driver |
| Number of Outputs | — | 2 (independent) |
| Configuration | — | Non-Inverting |
| Supply Voltage Range (VS) | — | 8 V to 36 V |
| Logic/VBAT Voltage Range | — | 3 V to 58 V |
| Source Current (typ.) | — | 175 mA |
| Sink Current (typ.) | — | 350 mA |
| Rise Time | — | 2 µs |
| Fall Time | — | 7 µs |
| Logic Input Compatibility | — | 3.3 V and 5 V MCU |
| Automotive Qualification | — | AEC-Q100 |
| RoHS Status | — | Compliant |