DP83822HRHBR vs DP83822HFRHBR Comparison
Detailed side-by-side comparison of DP83822HRHBR by Texas Instruments and DP83822HFRHBR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
DP83822HRHBR - 10/100Mbps Ethernet PHY Transceiver | TI (Tape & Reel)
DP83822HRHBR ✓ ActiveTexas Instruments
DP83822HFRHBR - 10/100 Mbps Ethernet PHY Transceiver | Texas Instruments
DP83822HFRHBR ✓ ActiveSpecification Comparison
| Parameter | DP83822HRHBR | DP83822HFRHBR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | RF Transceivers | Ethernet ICs |
| Lifecycle Status | Active | Active |
| Product Type | Ethernet PHY Transceiver | Ethernet Physical Layer Transceiver (PHY) |
| Data Rate | 10/100 Mbps | 10/100 Mbps |
| Network Standard | IEEE 802.3 10BASE-T, 100BASE-TX | — |
| MAC Interface | MII, RMII, RGMII | MII / RMII / RGMII |
| Package | 32-pin VQFN (RHB) 5 mm × 5 mm | 32-pin VQFN (RHB), 5 mm × 5 mm |
| ESD Protection (HBM) | 16 kV on MDI pins | — |
| Supply Voltage | 3.3 V (I/O), 1.8 V or 3.3 V (analog) | 3.3 V (single supply) |
| Power Consumption (Active Link) | [DATA_NEEDED: typical active-link power] | — |
| Power-Down Mode | Energy Detect, <10 mW | — |
| Energy Efficient Ethernet | IEEE 802.3az (EEE) | — |
| Wake-on-LAN | Yes (Magic Packet) | — |
| Cable Diagnostics | TDR-based cable-length and fault detection | Built-in TDR-based cable analysis |
| Reference Clock | 25 MHz crystal or oscillator input | — |
| Operating Temperature Range | -40 °C to +125 °C (industrial, HRHB) | -40 °C to +125 °C (extended) |
| Junction-to-Ambient Thermal Resistance (θJA) | [DATA_NEEDED: θJA for VQFN-32 5x5] | — |
| Mounting Type | Surface Mount | Surface Mount |
| MSL (Moisture Sensitivity Level) | [DATA_NEEDED: MSL rating] | — |
| RoHS Status | Compliant | Compliant |
| Lead-Free | Yes | — |
| Number of Ports | — | Single |
| Media Support | — | Twisted Pair (CAT-5) and Fiber (100BASE-FX) |
| ESD Protection (MDI pins) | — | 16 kV HBM |
| Crystal / Clock Input | — | 25 MHz (with integrated PLL) |
| Clock Output | — | 50 MHz (CMOS) |
| Power-Saving Modes | — | Energy Efficient Ethernet (EEE), Wake-on-LAN (WoL) |
| LED Outputs | — | Programmable, multi-function |
| MSL Level | — | [DATA_NEEDED: MSL rating] |