DRV8872DDAR vs DRV8873HPWPR Comparison
Detailed side-by-side comparison of DRV8872DDAR by Texas Instruments and DRV8873HPWPR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
DRV8872DDAR - 3.6A 45V Brushed DC Motor Driver | Texas Instruments
DRV8872DDAR ✓ ActiveTexas Instruments
DRV8873HPWPR - 40V 10A H-Bridge Motor Driver | Texas Instruments
DRV8873HPWPR ✓ ActiveSpecification Comparison
| Parameter | DRV8872DDAR | DRV8873HPWPR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Motor Drivers | Motor Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $1.42 | $1.86 |
| Motor Type | Brushed DC | Brushed DC |
| Output Configuration | H-Bridge (4 N-channel MOSFETs) | — |
| Supply Voltage (VM) | 6.5 V to 45 V | 4.5 V to 38 V |
| Peak Output Current | 3.6 A | 10 A |
| Typical R_DS(on) (HS + LS) | 565 mΩ | — |
| Logic Input Voltage (IN1, IN2) | 1.8 V to 5 V compatible | — |
| Current Regulation | Integrated via external ISENSE resistor | Yes (Smart-tune or fixed off-time) |
| PWM Control | Up to 200 kHz | — |
| Fault Reporting | nFAULT open-drain output | — |
| Sleep Mode | Dual-low inputs, low quiescent current | — |
| Thermal Protection | Thermal shutdown with auto-recovery | — |
| Operating Temperature | -40 °C to +125 °C | -40 C to +125 C |
| Package | HSOP-8 PowerPAD (8-pin SO PowerPAD) | 24-pin HTSSOP (PWP) with PowerPAD |
| Mounting Type | Surface Mount | Surface Mount |
| RoHS / Lead-Free | RoHS compliant, lead-free | — |
| Topology | — | H-Bridge (4 N-channel MOSFETs) |
| Absolute Maximum VM | — | 40 V |
| Continuous Output Current | — | 3.5 A (with proper PCB thermal design) |
| RDS(on) per HS+LS FET | — | [DATA_NEEDED: typical mOhm at 25 C] |
| Integrated Current Sensing | — | Yes (IPROPI analog output) |
| Control Interface | — | PH/EN (hardware) or PWM, selectable via MODE |
| MSL Level | — | 3 (168 hr / 260 C) |
| RoHS Status | — | Compliant |
| AEC-Q100 | — | Not qualified (use DRV8873-Q1 for automotive) |