DRV8873HPWPRQ1 vs DRV8873HPWPR Comparison
Detailed side-by-side comparison of DRV8873HPWPRQ1 by Texas Instruments and DRV8873HPWPR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
DRV8873HPWPRQ1 - Automotive 38V H-Bridge Motor Driver | TI
DRV8873HPWPRQ1 ✓ ActiveTexas Instruments
DRV8873HPWPR - 40V 10A H-Bridge Motor Driver | Texas Instruments
DRV8873HPWPR ✓ ActiveSpecification Comparison
| Parameter | DRV8873HPWPRQ1 | DRV8873HPWPR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Motor Drivers | Motor Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $2.42 | $1.86 |
| Product Type | H-Bridge Motor Driver | — |
| Motor Type | Brushed DC | Brushed DC |
| Number of H-Bridges | 1 | — |
| Supply Voltage Range | 4.5 V to 38 V | — |
| Peak Output Current | 10 A | 10 A |
| Continuous Output Current | 3.5 A (estimated, derate with package temperature) | 3.5 A (with proper PCB thermal design) |
| Rds(on) (HS + LS) | [DATA_NEEDED: Rds(on) per FET] | — |
| Control Interface | Hardwired (HW) / PH-EN / PWM | PH/EN (hardware) or PWM, selectable via MODE |
| Current Sensing | Integrated (IPROPI proportional output) | — |
| Quiescent Current | [DATA_NEEDED: Iq value] | — |
| Operating Temperature Range | -40 C to +125 C | — |
| Package | 24-pin HTSSOP (PWP) with PowerPAD | 24-pin HTSSOP (PWP) with PowerPAD |
| Mounting Type | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| MSL Level | 2 (1 year floor life at <=30 C / 60% RH) | 3 (168 hr / 260 C) |
| Lead-Free / REACH | Yes (compliant) | — |
| RoHS Status | Compliant | Compliant |
| Protection Features | UVLO, OCP, TSD, automatic fault retry | — |
| Topology | — | H-Bridge (4 N-channel MOSFETs) |
| Supply Voltage (VM) | — | 4.5 V to 38 V |
| Absolute Maximum VM | — | 40 V |
| RDS(on) per HS+LS FET | — | [DATA_NEEDED: typical mOhm at 25 C] |
| Integrated Current Sensing | — | Yes (IPROPI analog output) |
| Current Regulation | — | Yes (Smart-tune or fixed off-time) |
| Operating Temperature | — | -40 C to +125 C |
| AEC-Q100 | — | Not qualified (use DRV8873-Q1 for automotive) |