DRV8886ATPWP vs DRV8886PWPR Comparison
Detailed side-by-side comparison of DRV8886ATPWP by Texas Instruments and DRV8886PWPR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
DRV8886ATPWP - 37V 2A Bipolar Stepper Driver | Texas Instruments
DRV8886ATPWP ✓ ActiveSpecification Comparison
| Parameter | DRV8886ATPWP | DRV8886PWPR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Motor Drivers | Motor Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $2.04 | $1.52 |
| Motor Type | Bipolar Stepper | Bipolar stepper (2-phase) |
| Number of Full H-Bridges | 2 | 2 |
| Load Voltage Rating (VM max) | 37 V | — |
| Minimum Operating VM | 8 V | — |
| Logic Supply Voltage (VCC) | 3 V to 5.5 V | — |
| Full-Scale Output Current | 2 A (per H-bridge, 25°C PCB-dependent) | — |
| RMS Output Current | 1.4 A (24 V, TA=25°C, PCB design-dependent) | 1.4 A (24 V, TA = 25 C, PCB-dependent) |
| Peak Output Current | 3 A | 3 A |
| HS + LS On-Resistance (RDSon) | 550 mΩ | 550 mOhm |
| Control Interface | STEP / DIR (Hardware GPIO) | STEP / DIR |
| Microstepping Levels | Full to 1/16 step | Up to 1/16 step |
| Integrated Current Sense | Yes (internal sense, no external resistors) | — |
| AutoTune / Smart Tune Decay | Yes | — |
| Decay Modes | Smart tune, mixed, slow, fast (programmable) | 8 configurable modes including Smart Tune |
| Sleep Current | 20 µA | 20 uA (typical) |
| PWM Chopping Frequency | Up to 100 kHz | Up to 50 kHz |
| Operating Temperature Range | -40°C to +125°C | -40 C to +125 C |
| Temperature Grade | Automotive | — |
| Package | HTSSOP-24 (PWP) PowerPAD | HTSSOP-24 (PWP) with PowerPAD |
| Mounting Type | Surface Mount | Surface Mount |
| MSL Level | 2 (per JEDEC J-STD-020) | — |
| Terminal Finish | Nickel-Palladium-Gold | — |
| Peak Reflow Temperature | 260°C | — |
| RoHS Status | Compliant | Compliant |
| Operating Supply Voltage (VM) | — | 8 V to 37 V |
| Absolute Maximum VM | — | 40 V |
| Full-Scale Output Current (per phase) | — | 2 A |
| Current Sensing | — | Internal (no external sense resistor) |
| Logic Supply Voltage (VINT) | — | 3 V to 5.5 V |
| Protection Features | — | UVLO, OCP, TSD, open-load detect, charge-pump UV |
| Fault Output | — | nFAULT (active-low, open-drain) |
| AEC-Q100 Qualified | — | No (use DRV8886ATPWP for automotive) |